| Issue |
Title |
File |
| Vol 77, No 11 (2010) |
The 95th anniversary of A.A. Yezhevskiy |
|
|
- -.
|
| Vol 79, No 4 (2012) |
The AGCO Corporation expands its cooperation with «Agro-machinery» |
|
|
- -.
|
| Vol 78, No 11 (2011) |
The analysis of failures of electrohydraulic Common Rail injectors |
|
|
Gabitov I.I., Valiyev A.R., Vakhitov R.A.
|
| Vol 78, No 5 (2011) |
The analysis of key indicators of tractors' technical level based on the DLG test results |
|
|
Goltyapin V.Y.
|
| Vol 90, No 1 (2023) |
The analysis of principles of continuously variable transmission of tractors |
|
|
Kurochkin S.V.
|
| Vol 89, No 4 (2022) |
The analysis of the watered engine oil sludge |
|
|
Kolunin A.V.
|
| Vol 78, No 6 (2011) |
The application of statistical method to the fractionation of light waste in settling chamber |
|
|
Saitov V.Y., Farafonov V.G., Suvorov A.N.
|
| Vol 78, No 4 (2011) |
The assessment of vibrations of turbochargers bodies with different bearings designs |
|
|
Ivanov D.Y., Fisher A.S., Vazhenin K.V., Plekhanov D.A.
|
| Vol 86, No 1 (2019) |
The balance of the diamond-shaped plow in the horizontal plane |
(Rus)
|
|
CHupin P.V., Soyunov A.S., Golovin A.Y., Kirasirov O.M., Demchuk E.V.
|
| Vol 78, No 11 (2011) |
The bases of agricultural machinery industry development strategy |
|
|
Lipkovich E.I.
|
| Vol 77, No 3 (2010) |
The braking stability of tractor train composed of a wheel МТЗ tractor and a semitrailer |
|
|
Sazonov I.S., Kim V.A., Yasyukovich E.I., Bilyk O.V., Amelchenko P.A., Stasilevich A.G.
|
| Vol 89, No 3 (2022) |
The calculation and choice of the electromagnet parameters for the grain and seeds disinfectant device |
|
|
Maksimenko V.A., Bukhantsov K.N.
|
| Vol 84, No 3 (2017) |
THE CALCULATION OF THE DEPENDENT TOLERANCE ALIGNMENT REPAIR SHAFTS GEAR BOXES |
(Rus)
|
|
Leonov O.A., Vergazova Y.G., Antonova U.Y.
|
| Vol 84, No 9 (2017) |
The characteristic of innovations of working bodies for sowing in technology of soil-free tillage and sowing |
(Rus)
|
|
Bespamyatnova N.M., Bespamyatnov Y.A., Kolin'ko A.A.
|
| Vol 85, No 1 (2018) |
The choice of a rational ballasting scheme and the angle of application of the traction force for a caterpillar tractor |
(Rus)
|
|
Gorodetskiy K.I., Sharipov V.M., Alendeev E.M., Lavlinskiy A.M.
|
| Vol 84, No 6 (2017) |
The choice of universal measuring instruments for monitoring the cylinder liners of the engine during selective assembly |
(Rus)
|
|
Leonov O.A., Antonova U.Y.
|
| Vol 91, No 2 (2024) |
The combine harvester for cabbage harvesting in small-scale farms |
|
|
Alatyrev A.S., Emelyanov N.A., Nikitin V.S., Kruchinkina I.S., Alatyrev S.S.
|
| Vol 90, No 5 (2023) |
The concept of using energy-packed tractors as modular universal energy-technological units |
|
|
Sidorova A.V., Lavrov A.V., Sidorov M.V.
|
| Vol 89, No 2 (2022) |
The creators of tracked agricultural tractors. Dedicated to the 90th anniversary of the first domestic tractor engineering bureau |
(Rus)
|
|
Kosenko V.V.
|
| Vol 84, No 1 (2017) |
THE CURRENT STATE OF THE PRODUCTION AND ANALYSIS OF THE MARKET OF AGRICULTURAL TRACTORS FOREIGN BRANDS IN RUSSIA |
(Rus)
|
|
PODOLKO P.M., PANKIN K.E.
|
| Vol 78, No 11 (2011) |
The dependence of indicated power on the time-section of gas distribution mechanism of internal combustion engine |
|
|
Zholobov L.A., Dydykin A.M., Suvorov E.A.
|
| Vol 78, No 4 (2011) |
The dependence of seed pelleting in kinematic mode on the workload of drum pelleting device |
|
|
Kubeyev Y.I.
|
| Vol 87, No 3 (2020) |
The development of fertilizer application technology and the structure of the fleet |
(Rus)
|
|
Kokiyeva G.E., Voynash S.A.
|
| Vol 78, No 3 (2011) |
The development of land amelioration: problems and prospects |
|
|
- -.
|
| Vol 86, No 1 (2019) |
The development of the technical concept of the tractor |
(Rus)
|
|
Kut'kov G.M.
|
| Vol 88, No 3 (2021) |
The development of tractor theory |
(Rus)
|
|
Kut'kov G.M.
|
| Vol 78, No 2 (2011) |
The device for additional loading as a means to improve the traction and adhesive properties of motor and tractor wheeled machines |
|
|
Gorshkov Y.G., Larionova G.A., Starunova I.N., Kalugin A.A., Leschenko E.A.
|
| Vol 84, No 7 (2017) |
The device for automatic locking of inter-wheel differential of wheeled tractor |
(Rus)
|
|
Laubach V.P., Gerashchenko V.V., Kovalenko N.A.
|
| Vol 89, No 5 (2022) |
The double-flow electromechanical transmission of tracked vehicle |
|
|
Demidov N.N., Dobretsov R.Y., Kaninskiy A.O., Porshnev G.P.
|
| Vol 78, No 10 (2011) |
The duration of сontinuous operation of vacuum plate-type pump and its performance |
|
|
Lebedev A.T., Zakharin A.V.
|
| Vol 87, No 2 (2020) |
The effect of anisotropy on the interaction of the caterpillar propeller with the soil during the vehicle turn |
(Rus)
|
|
ZHakov A.O., Troyanovskaya I.P.
|
| Vol 91, No 6 (2024) |
The effect of annealing on the impact resistance of machine parts made using 3D-printing technology from polylactide |
|
|
Baidakova V.V., Taldykin D.S., Pletnev M.G.
|
| Vol 86, No 6 (2019) |
The effect of overlapping adjacent passages of the unit on the uniformity of the application of mineral fertilizers |
(Rus)
|
|
Sedashkin A.N., Kostrigin A.A., Milyushina E.A.
|
| Vol 92, No 1 (2025) |
The effect of the recirculation coefficient of the drying agent on its temperature in the aerodynamic heating dryer |
|
|
Ozherelyev V.N., Kupreenko A.I., Bezik D.A., Isaev K.M., Kupreenko O.A.
|
| Vol 78, No 10 (2011) |
The effectiveness of regulation of wheeled tractors' ballasting degree when operating with mounted machines |
|
|
Grebnev V.P., Vorokhobin A.V.
|
| Vol 79, No 2 (2012) |
The effectiveness of tractor diesel operating modes control based on fuel omissions |
|
|
Galiullin R.R.
|
| Vol 78, No 9 (2011) |
The efficiency of drum pelleting device with rotating bottom |
|
|
Kukharev O.N., Siomov I.N., Chirkov A.M.
|
| Vol 91, No 1 (2024) |
The efficiency of thermal protection of ICE pistons with the micro-arc oxidation |
|
|
Dudareva N.Y., Kolomeichenko A.V., Kisel Y.E.
|
| Vol 77, No 7 (2010) |
The electro-spark processing of metallic surfaces |
|
|
Kupriyanov I.N., Alov V.A., Yeparkhin O.M., Sotskaya I.M.
|
| Vol 84, No 3 (2017) |
THE ESTIMATION OF CONSTRUCTION AND PARAMETERS FOR CAREFUL LOADING OF CABBAGE HEADS BY MACHINE-HARVESTING |
(Rus)
|
|
Alatyrev S.S., Cruchinkina I.S., Yurkin A.P., Alatyrev A.S.
|
| Vol 89, No 3 (2022) |
The evolution of design of general purpose tracked tractors |
|
|
Tsench Y.S., Kosenko V.V., Sharov V.V.
|
| Vol 87, No 1 (2020) |
The experimental evaluation of the effectiveness of the regenerative drive of the working bodies of a combine harvester |
(Rus)
|
|
Dubovik D.A., Pershukevich N.P., Pribyl'skij V.I., Baran O.A., SHantyko A.S., Vyrskij A.N.
|
| Vol 84, No 6 (2017) |
The experimental setup for the study of soil-working bodies |
(Rus)
|
|
Bozhko I.V., Parkhomenko G.G., Gromakov A.V., Maksimenko V.A., Kambulov S.I.
|
| Vol 89, No 3 (2022) |
The experimental study of mechanical losses in the modern diesel engine |
|
|
Khannanov M.D., Gumerov I.F., Fardeev L.I., Kulikov A.S., Alimgulov E.R.
|
| Vol 91, No 2 (2024) |
The facility for rapeseed peeling in the ultrahigh frequency electromagnetic field |
|
|
Kuchin N.N., Tsuglenok N.V., Storchevoy V.F., Storchevoy A.V.
|
| Vol 78, No 2 (2011) |
The failure-free performance indices of steering control for transport vehicles used in agriculture |
|
|
Zhutov A.G., Popov A.Y., Grigorov V.I.
|
| Vol 91, No 5 (2024) |
The first century of Kirov tractors |
|
|
Sharov V.V., Serebryakov S.A., Dmitriev M.I., Melnikov D.V.
|
| Vol 88, No 6 (2021) |
The first steps to create domestic neutralizers of exhaust gases for automobiles and tractors |
(Rus)
|
|
Ignatovich I.V.
|
| Vol 89, No 5 (2022) |
The first with completely domestic design. The 85th anniversary of the STZ-NATI tractor |
|
|
Kosenko V.V., Sharov V.V.
|
| Vol 79, No 4 (2012) |
The functional purpose of vehicles for the rural settlements |
|
|
Dzotsenidze T.D., Levshin A.G., Yevtyushenkov N.Y., Kozlovskaya M.A., Myagkov A.Y.
|
| Vol 86, No 2 (2019) |
The general concept of block-modular construction of forest tillage tools |
(Rus)
|
|
Bartenev I.M., Lysych M.N.
|
| Vol 91, No 4 (2024) |
The HVAC system engineering method for a new family of unified cabins of combine harvesters |
|
|
Maslensky V.V., Bulygin Y.I., Pavlikov A.V.
|
| Vol 84, No 1 (2017) |
THE IMPACT FORCED FLUID COOLING OF FRICTION PAIRS IN AUTOMOTIVE CLUTCHES ON ITS THERMAL LOAD |
(Rus)
|
|
GORODETSKIY K.I., SHARIPOV V.M., YEVTUSHIK O.V., BERNATSKIY V.V., DMITRIYEV M.I., SHCHETININ Y.S.
|
| Vol 87, No 3 (2020) |
The increase of four-wheel tractor maneuverability |
(Rus)
|
|
Akhmetov A.A., Kambarov B.A., Kambarova D.U.
|
| Vol 86, No 5 (2019) |
The increase of the efficiency of harvesting the non-cereal part of the crop for the preparation of roughage |
(Rus)
|
|
Brusencov A.S., Tumanova M.I., CHulakov Y.A.
|
| Vol 91, No 1 (2024) |
The individual tubular low-toxic combustion chamber |
|
|
Kostyukov A.V., Valeev A.G., Dementiev A.A.
|
| Vol 77, No 7 (2010) |
The inertia moment of crank mechanism of in-line piston machines |
|
|
Dmitriyev S.V., Yegorov A.V., Kuzovkov S.G., Kozhin D.V.
|
| Vol 78, No 5 (2011) |
The influence of field sizes on the fuel consumption per hectare by class 1,4; 3 and 5 tractors |
|
|
Smirnov V.P.
|
| Vol 88, No 2 (2021) |
The influence of hardening on the operational properties of soil-cutting tools |
(Rus)
|
|
Markov B.A., Sedykh O.V., Bondarenko V.V.
|
| Vol 86, No 5 (2019) |
The influence of local loosening of the soil on soybean productivity |
(Rus)
|
|
Pashchenko V.F., Syromyatnikov Y.U., Hramov N.S., Vojnash S.A.
|
| Vol 85, No 1 (2018) |
The influence of modifiers on the conservation of rubber products of agricultural machinery |
(Rus)
|
|
Mel'kumova T.V.
|
| Vol 84, No 6 (2017) |
The influence of morphological characteristics of winter wheat plants on the choice of operating modes of combing header |
(Rus)
|
|
Bur'yanov M.A., Bur'yanov A.I., Chervyakov I.V., Kostylenko O.A.
|
| Vol 79, No 1 (2012) |
The influence of planetary clutch gear ratio on the rigidity of pneumohydraulic elastic element |
|
|
Kuznetsov N.G., Nekhoroshev D.A., Nekhoroshev D.D.
|
| Vol 78, No 11 (2011) |
The influence of soil properties and knife disc operating depth on the disc resistance |
|
|
Akimov A.P., Konstantinov Y.V., Akvilyanova I.N.
|
| Vol 78, No 11 (2011) |
The influence of tension displacement phase angle on the quality of coatings under combined method |
|
|
Gorokhova M.N.
|
| Vol 86, No 2 (2019) |
The influence of the angle of loosening of the working body of an agricultural instrument on the intensity of destruction of soil aggregates |
(Rus)
|
|
Myalenko V.I.
|
| Vol 87, No 6 (2020) |
The influence of the combined coulter operation on the quality and yield of grain |
(Rus)
|
|
Kem A.A., Chekusov M.S., Shmidt A.N.
|
| Vol 91, No 5 (2024) |
The influence of the composition of the combed grain heap on the preliminary separation of loose grain |
|
|
Ozhereliev V.N., Nikitin V.V., Savin V.Y., Sinyaya N.V.
|
| Vol 92, No 1 (2025) |
The influence of the main method of tillage on its moisture and temperature conditions |
|
|
Semenikhina Y.A., Kambulov S.I., Rykov V.B., Rudoy D.V., Rybak A.T., Olshevskaya A.V., Teplyakova S.V.
|
| Vol 86, No 1 (2019) |
The influence of the number of axles of wheeled transport traction machines on rolling resistance |
(Rus)
|
|
SHilo I.N., Romanyuk N.N., Orda A.N., Kushnir V.G.
|
| Vol 88, No 5 (2021) |
The influence of the parameters of the running systems of wheeled vehicles on the change in soil density |
(Rus)
|
|
Shilo I.N., Romanyuk N.N., Kruk I.S., Orda A.N., Galimov R.R., Maksimovich K.Y., Voynash S.A., Luchinovich A.A.
|
| Vol 85, No 3 (2018) |
The influence of the properties of materials used to make the working bodies of the stripper header on the quality of the performed process |
(Rus)
|
|
Bur'yanov M.A., Chervyakov I.V., Bur'yanov A.I.
|
| Vol 88, No 3 (2021) |
The influence of the reinforcement of the chisel-shaped area of the ploughshare on the change in the geometric parameters of radial wear during operation |
(Rus)
|
|
Kozarez I.V., Mikhal'chenkova M.A., Lavrov V.I., Perepechina Y.I.
|
| Vol 86, No 5 (2019) |
The influence of the speed of the floating conveyor to the separating ability of the bottom of the inclined chamber |
(Rus)
|
|
Ozhereliev V.N., Nikitin V.V., Sinyaya N.V., Kuzyur V.M., Kuznetsov A.E.
|
| Vol 77, No 6 (2010) |
The intensity of load distribution in a compressed-extended nut with supporting ring |
|
|
Kuzmin Y.A.
|
| Vol 85, No 3 (2018) |
The investigation of thinning of a layer of the long-fibred flax stems in a channel with adjustable cross-section |
(Rus)
|
|
Romanov V.A., Novikov E.H., Bezbabchenko A.V.
|
| Vol 78, No 9 (2011) |
The IV International conference «Grain-growing Siberia» |
|
|
- -.
|
| Vol 89, No 6 (2022) |
The justification of functional properties of agricultural moving power units in the multi-objective scenario |
|
|
Godzhaev T.Z., Zubina V.A., Malakhov I.S.
|
| Vol 79, No 1 (2012) |
The main design parameters of a compact settling chamber |
|
|
Saitov V.Y., Grigoryev D.V.
|
| Vol 86, No 2 (2019) |
The main directions of development of domestic snowmobiles |
(Rus)
|
|
D'yakov A.S., Novikov V.V., Pozdeev A.V.
|
| Vol 78, No 12 (2011) |
The main stages of development of domestic harvesters with axial-rotor thrеshing and separating system |
|
|
Gorbachiov I.V., Shreyder Y.M.
|
| Vol 90, No 2 (2023) |
The mathematical model of turning kinematics of a two-section active road train with real and ideal control systems of semitrailer wheels turning |
|
|
Godzhaev Z.A., Kapitonov M.V.
|
| Vol 84, No 8 (2017) |
The matter of extreme national importance |
(Rus)
|
|
Kolchin N.N., Zvolinskiy V.N.
|
| Vol 91, No 5 (2024) |
The method for calculating the support reactions of a statically indeterminable final drive shaft of a tractor drive axle |
|
|
Serov K.N., Hoodorozhkov S.I.
|
| Vol 85, No 1 (2018) |
The method for calculating the traction resistance of a flat disk |
(Rus)
|
|
Akimov A.P., Konstantinov Y.V.
|
| Vol 91, No 3 (2024) |
The method for comparing different blade shapes of flat knives of a rotary cultivator |
|
|
Kudzaev A.B., Kalagova R.V.
|
| Vol 87, No 2 (2020) |
The method for determining the amount of interference formed during the assembly of the rim and disk of the wheel of automobile and tractor |
(Rus)
|
|
Maksimov E.A., Ustinovsky E.P.
|
| Vol 84, No 5 (2017) |
The method of constructing the diagrams of tangential stresses in the contact zone of an axle wheel with soil |
(Rus)
|
|
Godzhaev Z.A., Rusanov A.V., Revenko V.Y.
|
| Vol 89, No 2 (2022) |
The Method of Determination of Properties of Air Springs with Two Pressure Stages and Counterpressure |
(Rus)
|
|
Nakaznoy O.A., Tsipilev A.A.
|
| Vol 90, No 2 (2023) |
The method of development of the electronic control system for curvilinear motion of a high-speed tracked vehicle with dual-flow transmission |
|
|
Buzunov N.V., Ivanenkov V.V., Pirozhkov R.D., Kositsyn B.B., Kotiev G.O.
|
| Vol 89, No 6 (2022) |
The method of reasonable selection of a pneumatic tire set for an agricultural tractor |
|
|
Anisimov N.L.
|
| Vol 91, No 3 (2024) |
The method of synthesis of the geometry of the longitudinal profile and the design parameters of the leaf spring using the finite element method |
|
|
Rubanov P.S., Maksimov R.O., Chetverikov M.V.
|
| Vol 91, No 5 (2024) |
The method of the vehicle suspension system damping element load characteristic synthesizing |
|
|
Chetverikov M.V., Maksimov R.O., Rubanov P.S.
|
| Vol 87, No 5 (2020) |
The methodology for assessing the level of localization of agricultural tractors production |
(Rus)
|
|
Godzhayev Z.A., Lavrov A.V., Shevtsov V.G., Zubina V.A.
|
| Vol 85, No 4 (2018) |
The methodology for determining of the energy costs for the probabilistic nature of the load of a machine-tractor unit |
(Rus)
|
|
Dzhabborov N.I., SHkrabak V.S.
|
| Vol 76, No 10 (2009) |
The new follow-up device of cabbage harvesting machine |
|
|
Alatyrev S.S., Toncheva N.N., Grigor'ev A.O., Alatyreva I.S.
|
| Vol 90, No 5 (2023) |
The observer of traction electromagnetic torque at the shaft of a traction electric motor |
|
|
Klimov A.V.
|
| Vol 91, No 6 (2024) |
The optimal control law of the power supplied to the wheeled vehicle in case of curvilinear movement |
|
|
Kotiev G.O., Gorelov V.A., Kositsyn B.B., Gazizullin R.L., Byakov K.E.
|
| Vol 79, No 1 (2012) |
The optimal profile of subsurface cultivator hoe |
|
|
Svechnikov P.G.
|
| Vol 90, No 1 (2023) |
The optimization of parameters of a safety element of the finger mechanism of the header auger of a combine harvester |
|
|
Kotov A.V.
|
| Vol 78, No 1 (2011) |
The partial accelerations method at mobile machines' dynamics investigation |
|
|
Artiomov N.P., Lebedev A.T., Alekseyev O.P., Volkov V.P., Podrigalo M.A., Polyanskiy A.S.
|
| Vol 87, No 4 (2020) |
The point of obsolescence of complex agricultural machinery |
(Rus)
|
|
Mel'nikov D.G., Tsarev Y.A., Adamchukova Y.Y.
|
| Vol 84, No 12 (2017) |
The power unit of universal tractors of traction class 1,4 with an integrated starter generator |
(Rus)
|
|
Bekeev A.K., Aliev A.Y., Aliev S.A.
|
| Vol 80, No 8 (2013) |
The problem of synthesis of control algorithms for gear shift using electric-hydraulic and electronic devices |
|
|
Shipilevskiy G.B.
|
| Vol 80, No 7 (2013) |
The problem of synthesis of control algorithms for gear shift using electric-hydraulic and electronic devices |
|
|
Shipilevskiy G.B.
|
| Vol 91, No 5 (2024) |
The problematic issues of unmanned aerial vehicle application in agriculture |
|
|
Erdniev L.P., Kuzyanov D.A., Gusev Y.S., Mikerov A.N.
|
| Vol 90, No 6 (2023) |
The procedure for improving the management of the maintenance and repair process using the neural network technology |
(Rus)
(Eng)
|
|
Shimokhin A.V., Kirasirov O.M.
|
| Vol 90, No 1 (2023) |
The properties of machine-tractor unit (MTU) regarding soil preparation with bed ridging |
|
|
Ochotnikov B.L., Egorov V.N., Stroganov Y.N.
|
| Vol 78, No 5 (2011) |
The quality of pinching of the soil-vegetable mass by polygonal disc working members |
|
|
Kobyakov I.D., Soyunov A.S., Miller Y.N.
|
| Vol 78, No 1 (2011) |
The quality of seed pelleting in a drum pelleting device with rotating bottom |
|
|
Kukharev O.N., Siomov I.N., Chirkov A.M.
|
| Vol 77, No 5 (2010) |
The quality of soil cultivation by disk working members |
|
|
Kobyakov I.D.
|
| Vol 84, No 9 (2017) |
The rationale for the curvilinear shape of the working body for layered subsurface tillage |
(Rus)
|
|
Parkhomenko G.G., Bozhko I.V., Gromakov A.V.
|
| Vol 87, No 3 (2020) |
The relative position of the flax plant strip and stripping apparatus during separate cleaning |
(Rus)
|
|
Zintsov A.N.
|
| Vol 91, No 3 (2024) |
The reliability function of the case-hardened teeth of wheels of cylindrical gears |
|
|
Lebedev S.Y., Syzrantsev V.N.
|
| Vol 85, No 3 (2018) |
The results determine the acceleration and the mass of the tractor MTZ-80 |
(Rus)
|
|
Arzhenovskiy A.G., Asaturyan S.V., Dagldiyan A.A., Kozlov D.S., Shchus E.R.
|
| Vol 78, No 2 (2011) |
The results of an improved potato harvester's field tests |
|
|
Byshov D.N.
|
| Vol 86, No 1 (2019) |
The results of experimental studies of digging plow for onions |
(Rus)
|
|
Sibiryov A.V., Aksenov A.G.
|
| Vol 87, No 1 (2020) |
The results of experimental studies of the root crop chopper |
(Rus)
|
|
Shukhanov S.N., Dorzhiev A.S., Kosareva A.V.
|
| Vol 78, No 5 (2011) |
The results of motor studies of mustard oil biodiesel |
|
|
Ukhanov A.P., Ukhanov D.A., Golubev V.A., Safarov R.K., Shemenev D.S.
|
| Vol 92, No 2 (2025) |
The results of studies on the durability and sustainability of the repair kit of the diesel engine fuel system in interaction with vegetable oils |
|
|
Apatenko A.S., Rudenko I.I.
|
| Vol 86, No 3 (2019) |
The results of the analysis of the continuous input of additives in the lubricating system of the engine operating on gaseous fuel |
(Rus)
|
|
Utaev S.A.
|
| Vol 90, No 6 (2023) |
The results of the operational test of a mock-up sample of the tool with an active drive of rotary working bodies with an assessment of agrotechnical indicators |
(Rus)
|
|
Kravchenko R.I.
|
| Vol 86, No 3 (2019) |
The results of the study of the rigidity of tires of tractor wheels and its effect on tractor vibrations |
(Rus)
|
|
Zolotarevskaya D.I.
|
| Vol 77, No 6 (2010) |
The role of modular power machines in the formation of tractor types in Ukraine |
|
|
Nadykto V.T.
|
| Vol 79, No 3 (2012) |
The role of tractors' power characteristics in the formation of their types |
|
|
Nadykto V.T.
|
| Vol 79, No 2 (2012) |
The SI system: units of measurement of dispersibility |
|
|
Veretennikov Y.M., Ostrovskiy V.G., Antonyuk P.N., Paremskiy I.Y., Ovsyankina A.V.
|
| Vol 91, No 3 (2024) |
The study of forced oscillations in the non-linear system of an individual traction drive |
|
|
Klimov A.V.
|
| Vol 84, No 3 (2017) |
THE STUDY OF POSSIBILITIES FOR REDUCING FUEL CONSUMPTION FOR NATURAL GAS ENGINE BASED ON DIESEL AT IDLE SPEED |
(Rus)
|
|
Apelinskiy D.V., Gusarov V.V., Fomin V.M.
|
| Vol 86, No 2 (2019) |
The study of soil crumbling when using new working bodies |
(Rus)
|
|
Parhomenko G.G.
|
| Vol 87, No 1 (2020) |
The study of the performance of a diesel nozzle on mixed fuels with insufficient low-temperature properties |
(Rus)
|
|
Plotnikov S.A., Buzikov S.H., Kozlov I.S.
|
| Vol 91, No 5 (2024) |
The study of the process of orientation of the flax strip in flax harvesters |
|
|
Zintsov A.N., Kovalev M.M., Perov G.A.
|
| Vol 87, No 2 (2020) |
The study of the technological process of the operation of the stalk lifter when mowing down dead grain and leguminous crops |
(Rus)
|
|
Primak V.N., Popov A.Y.
|
| Vol 85, No 1 (2018) |
The substantiation of parameters of sowing machine with adaptive dosing elements for seeding of corn |
(Rus)
|
|
Dubina K.P., Nesmiyan A.Y., Dolzhikov V.V., Ashitko A.A.
|
| Vol 90, No 5 (2023) |
The technology of cabbage harvesting with the use of the multiple-option harvester and the economic assessment of it |
|
|
Alatyrev A.S., Kruchinkina I.S., Alatyrev S.S., Nikitin V.S.
|
| Vol 86, No 5 (2019) |
The temperature state of the engine warmed up in freezing conditions in cold climates |
(Rus)
|
|
Kolunin A.V., Bur'yan I.A., Novikov O.V.
|
| Vol 77, No 11 (2010) |
The tool of plough-type ripper for plain ploughing |
|
|
Konstantinov M.M., Nuralin B.N., Oleynikov S.V.
|
| Vol 90, No 4 (2023) |
The Tractors and Agricultural Machinery journal increases the level of publications |
|
|
Arseniev S.Y.
|
| Vol 86, No 2 (2019) |
The transporting ability of the rotor of the soil-cultivating loosening and separating vehicle |
(Rus)
|
|
Pashchenko V.F., Syromyatnikov Y.U.
|
| Vol 85, No 1 (2018) |
The unification of certain terms and concepts used in the study of land transport-technological vehicles |
(Rus)
|
|
Parfenov A.P., Shchetinin Y.S.
|
| Vol 79, No 2 (2012) |
The uniformity of grain seed distribution with a double-strand opener |
|
|
Demchuk Y.V., Kobyakov I.D.
|
| Vol 89, No 6 (2022) |
The unit for improvement of degenerated mountainside sections |
|
|
Bideev S.I., Gulueva L.R.
|
| Vol 85, No 6 (2018) |
The unit for making dusty lime fertilizers |
(Rus)
|
|
Sedashkin A.N., Milyushina E.A., Kostrigin A.A., Dragunov A.V.
|
| Vol 78, No 11 (2011) |
The up-to-date stepless transmissions for farm tractors |
|
|
Scheltsyn N.A., Frumkin L.A., Ivanov I.V.
|
| Vol 78, No 4 (2011) |
The use of 3D-modeling for the calculation of hanging knife |
|
|
Nikolayev V.A.
|
| Vol 86, No 4 (2019) |
The use of combined convection-microwave processing line for drying fruits and vegetables |
(Rus)
|
|
Korolev A.A., Prokopenko A.V.
|
| Vol 77, No 10 (2010) |
The use of computer during the optimization of energetic parameters of machine-tractor unit |
|
|
Dementyev A.M.
|
| Vol 86, No 4 (2019) |
The use of hardness testing to assess the technical condition of common rail fuel lines |
(Rus)
|
|
Sveshchinskij V.O.
|
| Vol 89, No 6 (2022) |
The use of liquefied petroleum gas as fuel in tractor diesel engines |
|
|
Uyutov S.Y., Godzhaev Z.A.
|
| Vol 84, No 8 (2017) |
The use of plastics in the construction of soil-working tools |
(Rus)
|
|
Parkhomenko G.G., Bozhko I.V., Gromakov A.V., Pakhomov V.I.
|
| Vol 87, No 1 (2020) |
The use of simple teeth surfaces in non-conjugate gears |
(Rus)
|
|
Timofeev B.P., Kovalevich A.V., Sachkov M.Y.
|
| 2101 - 2250 of 2397 Items |
<< < 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 > >> |
