| 期 |
标题 |
文件 |
| 卷 84, 编号 3 (2017) |
MATHEMATICAL MODELING OF THE CONTROLLED MOTION OF THE WHEELED MACHINE-TRACTOR UNIT |
(Rus)
|
|
Poddubnyy V., Pavlyuk A., Poddubnaya M.
|
| 卷 80, 编号 3 (2013) |
Mathematical modeling of leakages in axial-plunger hydraulic machines |
|
|
Filippova Y., Makarkin I.
|
| 卷 85, 编号 4 (2018) |
Mathematical modeling of functioning of a tillage machine-tractor unit |
(Rus)
|
|
Parhomenko S., Parhomenko G.
|
| 卷 85, 编号 6 (2018) |
Mathematical modeling of the chemical kinetics of the processes of fuel ignition in the combustion chamber of a diesel engine on start modes |
(Rus)
|
|
Bondar' V., Malozyomov A., Kukis V., Omel'chenko E., Malozyomov G.
|
| 卷 77, 编号 8 (2010) |
Mathematical provision of model for power flow differentiation during the development of wheeled mover |
|
|
Asmankin Y., Neyfeld Y., Zavaliy M., Sorokin A.
|
| 卷 79, 编号 5 (2012) |
Material and power costs of machine-tractor unit operation as the complex criterion of its quality estimation |
|
|
Roslavtsev A., Sapozhnikov I.
|
| 卷 80, 编号 3 (2013) |
РСК-2 shrubbery topper |
|
|
Bychkov V., Shevkun V., Kadykalo G., Kotysko V.
|
| 卷 83, 编号 3 (2016) |
Machines and technologies of entire lands levelling for paddy field |
(Rus)
|
|
Efremov A., Nasonov S.
|
| 卷 79, 编号 6 (2012) |
International exhibition of innovations |
|
|
- -.
|
| 卷 76, 编号 2 (2009) |
International conference in Warsaw |
|
|
- -.
|
| 卷 78, 编号 11 (2011) |
An International conference in All-Russian Research Institute of repair and maintenance of machine and tractor fleet (ГОСНИТИ) |
|
|
- -.
|
| 卷 76, 编号 7 (2009) |
International conference "Progress of transport means and systems - 2009" |
|
|
- -.
|
| 卷 76, 编号 7 (2009) |
International scientific conference in Warsaw |
|
|
- -.
|
| 卷 81, 编号 1 (2014) |
International research and practice conference Transport, logistics, environmental management-2013 |
|
|
- -.
|
| 卷 80, 编号 3 (2013) |
International conference in Belarus State Agrarian Technical University |
|
|
- -.
|
| 卷 77, 编号 5 (2010) |
International forum «Engineering Technologies 2010» |
|
|
- -.
|
| 卷 76, 编号 8 (2009) |
Metal-polymeric chain drive |
|
|
Shevtsov S., Sayko I., Klimenko A., Zoriev I., Berberov S.
|
| 卷 81, 编号 12 (2014) |
Grain thrower based on a rotary working organ |
|
|
Butenko A.
|
| 卷 82, 编号 3 (2015) |
Method for selection of rational parameters of suspension system of high-speed tracked vehicle |
|
|
Savochkin V., Sharipov V., Smirnov I., Shishanov S., Tarasova L.
|
| 卷 90, 编号 1 (2023) |
Method for detecting the loss of stability of the movement of tractors when towing a trailer or a coupled unit |
(Rus)
(Eng)
|
|
Zhileykin M., Sirotin P., Nosikov S., Pulyaev N.
|
| 卷 76, 编号 10 (2009) |
Method and equipment for express diagnostics of quenching elements of the suspension for motor transport means |
|
|
Drincha V., Moshkin N., Bazarov D.
|
| 卷 85, 编号 2 (2018) |
Method and results of the evaluation of the influence of the energy of grain recovery, contacting in the head with header fairing on its parameters and quality of work |
(Rus)
|
|
Bur’yanov A., Bur’yanov M., Chervyakov I.
|
| 卷 78, 编号 1 (2011) |
A method of investigating the destruction of connection between ear and grain |
|
|
Gutrov M.
|
| 卷 78, 编号 5 (2011) |
A method of study of the short log tractor operating modes |
|
|
Voynash A., Voynash S.
|
| 卷 80, 编号 3 (2013) |
A technique of volumetric automated assembly of multispan units |
|
|
Saninskiy V., Storchak N., Platonova Y.
|
| 卷 76, 编号 10 (2009) |
Method of determination of forage harvesting units parameters by means of similarity theory |
|
|
Serzin I., Arsen'yev G.
|
| 卷 88, 编号 5 (2021) |
Method for determining the parameters of the front loader electromechanical transmission |
(Rus)
|
|
Gorelov V., Kositsyn B., Stadukhin A., Chudakov O.
|
| 卷 80, 编号 2 (2013) |
Estimation method of real embedding of working organs under the testing of soil cultivating machinery |
|
|
Kireyev I., Koval Z.
|
| 卷 78, 编号 1 (2011) |
The partial accelerations method at mobile machines' dynamics investigation |
|
|
Artiomov N., Lebedev A., Alekseyev O., Volkov V., Podrigalo M., Polyanskiy A.
|
| 卷 86, 编号 3 (2019) |
Method of improving the service properties of the plowshare frame using abrasion-resistant surfacing materials and polymer composites |
(Rus)
|
|
Mihal'chenkov A., Mihal'chenkova M., Petrakov M., Gucan A.
|
| 卷 79, 编号 10 (2012) |
A method of construction of measuring and computing system for machine-tractor units testing |
|
|
Inshakov A., Kornaukhov O., Filin A.
|
| 卷 84, 编号 5 (2017) |
The method of constructing the diagrams of tangential stresses in the contact zone of an axle wheel with soil |
(Rus)
|
|
Godzhaev Z., Rusanov A., Revenko V.
|
| 卷 88, 编号 6 (2021) |
Method for predicting the technical appearance of grain and forage harvesters of new generations with a substantiation of the structure of their vibration protection system |
(Rus)
|
|
Sirotin P.
|
| 卷 77, 编号 12 (2010) |
Method of technical state forecasting for mobile equipment |
|
|
Kokorev G., Uspensky I., Nikolotov I., Kartsev Y.
|
| 卷 90, 编号 2 (2023) |
The method of development of the electronic control system for curvilinear motion of a high-speed tracked vehicle with dual-flow transmission |
(Rus)
(Eng)
|
|
Buzunov N., Ivanenkov V., Pirozhkov R., Kositsyn B., Kotiev G.
|
| 卷 83, 编号 12 (2016) |
A method for calculation of oil supply to the parts of units of agricultural machinery |
(Rus)
|
|
Malomyzhev O., Fedotova N., Skutel'nik V.
|
| 卷 77, 编号 4 (2010) |
A method of synthesis of multilevel cushioning systems of high-speed caterpillar machines |
|
|
Kotiyev G., Sarach Y.
|
| 卷 91, 编号 5 (2024) |
The method of the vehicle suspension system damping element load characteristic synthesizing |
(Rus)
|
|
Chetverikov M., Maksimov R., Rubanov P.
|
| 卷 80, 编号 4 (2013) |
A method of slipping decrease of wheeled pneumatic mover |
|
|
Murog I., Kalugin A.
|
| 卷 84, 编号 1 (2017) |
METHOD OF IMPROVING THE CHARACTERISTICS OF A GAS ENGINE, DEVELOPED ON THE BASE OF A DIESEL ENGINE |
(Rus)
|
|
FOMIN V., GUSAROV V., LATYSHEV A.
|
| 卷 88, 编号 6 (2021) |
Method of controlling the slipping of a wheel propeller of automobile and tractor |
(Rus)
|
|
Gazizullin R., Chzhen K., Kotiyev G., Kositsyn B.
|
| 卷 78, 编号 10 (2011) |
A method of adjusted strength calculation of parts with contacting thread connections |
|
|
Yegozhev A.
|
| 卷 85, 编号 4 (2018) |
Method of the strength analysis of a track-type tractor undercarriage with the use of multibody simulation and fininte element analysis |
(Rus)
|
|
Gorelov V., Komissarov A., Vdovin D., Gaev S., Vyaznikov M., Taratorkin I.
|
| 卷 86, 编号 6 (2019) |
Method of selection of optimal damping coefficients for torsional vibration dampers of crankshafts of automobile and tractor engines |
(Rus)
|
|
Gots A.
|
| 卷 81, 编号 9 (2014) |
Method for selection of parameters of machine and tractor unit taking into account a possible stability loss of wheeled tractor with high tractional load |
|
|
Schetinin Y., Klimova Y., Tarasova L.
|
| 卷 77, 编号 8 (2010) |
A procedure of choice of generators' spectrum for the infrared drying and heating |
|
|
Filatov V.
|
| 卷 76, 编号 9 (2009) |
Procedure of studying dynamics of watching system for controlling power take-off shaft of wheeled machines |
|
|
Zhdanovich C., Geraschenko V., Yaskevich M.
|
| 卷 76, 编号 10 (2009) |
Procedure of complex assessment of compared machines effectiveness |
|
|
Maslov G.
|
| 卷 77, 编号 6 (2010) |
Procedure of complex express evaluation of machine and tractor unit competitiveness |
|
|
Kobko A.
|
| 卷 82, 编号 9 (2015) |
Method of mathematical modeling of interaction between plants of grain crops and stripper drum of a header |
|
|
Buryanov M., Buryanov A., Kostylenko O.
|
| 卷 82, 编号 10 (2015) |
Method of mathematical modeling of grain moving process in conveying channel of stripper header |
|
|
Buryanov M., Buryanov A., Chervyakov I.
|
| 卷 86, 编号 5 (2019) |
Methodology for multicriteria assessment and selection of an effective method of grain disinfection |
(Rus)
|
|
Pahomov A.
|
| 卷 76, 编号 11 (2009) |
A potato combine harvester adjustment procedure |
|
|
Kostenko M., Shaposhnikov A., Kostenko N., Goryachkina I.
|
| 卷 82, 编号 7 (2015) |
Method for substantiation of modernization parameters of maintenance and repair base of enterprises using agricultural machinery |
|
|
Kushnarev L.
|
| 卷 82, 编号 7 (2015) |
Method for parameters substantiation of deflector of single-drum stripper header |
|
|
Buryanov M., Buryanov A., Kostylenko O.
|
| 卷 87, 编号 2 (2020) |
The method for determining the amount of interference formed during the assembly of the rim and disk of the wheel of automobile and tractor |
(Rus)
|
|
Maksimov E., Ustinovsky E.
|
| 卷 80, 编号 4 (2013) |
Procedure of determination of tubers free lifting and grinding length |
|
|
Maksimov L., Strunov A., Muratov P., Vasilyev A.
|
| 卷 84, 编号 2 (2017) |
METHOD OF DETERMINING WEAR OF FAN BLADES CRUSHER GRAIN |
(Rus)
|
|
Goeva V.
|
| 卷 80, 编号 2 (2013) |
A method of characterization of resource distribution law of high-pressure fuel pump under bench tests using MathCAD software |
|
|
Solomashkin A., Aleksandrov V.
|
| 卷 86, 编号 5 (2019) |
Method for determining the parameters of an electromechanical transmission of an industrial tractor |
(Rus)
|
|
Padalkin B., Gorelov V., Staduhin A., Kosicyn B., Balkovskij K.
|
| 卷 85, 编号 5 (2018) |
Method of determining the rational composition of arable unit |
(Rus)
|
|
Bojkov V., Starcev S., Pavlov A., Nesterov E., Lavrent'ev A.
|
| 卷 83, 编号 10 (2016) |
Determination method of rational design parameters for four-shaft not-coaxial preselector transmissions of agricultural tractors |
(Rus)
|
|
Sharipov V., Nyunin B., Kryuchkov V., Fedotkin R., Alendeev E., Timofievskiy A.
|
| 卷 89, 编号 2 (2022) |
The Method of Determination of Properties of Air Springs with Two Pressure Stages and Counterpressure |
(Rus)
|
|
Nakaznoy O., Tsipilev A.
|
| 卷 85, 编号 4 (2018) |
The methodology for determining of the energy costs for the probabilistic nature of the load of a machine-tractor unit |
(Rus)
|
|
Dzhabborov N., SHkrabak V.
|
| 卷 79, 编号 1 (2012) |
Methods of optimal aggregation of basic machines and working equipment |
|
|
Yanson R., Agapov A., Nazimov M.
|
| 卷 78, 编号 3 (2011) |
Methods of assessment of mobile energetic vehicles' technological versatility |
|
|
Kutkov G., Kuzmichiov V.
|
| 卷 76, 编号 7 (2009) |
Procedure of construction of tractor versatile consumer's characteristic |
|
|
Uss I., Meleshko M., Lyubchevskiy A., Kozlovskiy Y., Gus'kov A., Zhdanovich C.
|
| 卷 84, 编号 3 (2017) |
DESIGN METHOD OF PIN ENGAGEMENT DRIVE SPROCKETSWITH RUBBER-REINFORCED TRACKS OF TRACTION AND TRANSPORTATION VEHICLES |
(Rus)
|
|
Fedotkin R., Kryuchkov V., Beynenson V., Parfenov V.
|
| 卷 89, 编号 4 (2022) |
Modeling the durability of diesel pistons with a crack on the edge of the combustion chamber |
(Rus)
|
|
Gots A., Abalyaev A., Fomin V.
|
| 卷 78, 编号 4 (2011) |
A method for calculating the maximum possible level of radiation protection of operator |
|
|
Gusev S.
|
| 卷 91, 编号 5 (2024) |
The method for calculating the support reactions of a statically indeterminable final drive shaft of a tractor drive axle |
(Rus)
|
|
Serov K., Hoodorozhkov S.
|
| 卷 77, 编号 12 (2010) |
Design procedure of main parameters of the axial single-disk brake |
|
|
Khabrat N.
|
| 卷 77, 编号 1 (2010) |
A procedure of power losses calculation of caterpillar tractor skid by kinematical inconsistency and asymmetric loading between propellers |
|
|
Kotovskov A., Potapov P.
|
| 卷 80, 编号 1 (2013) |
Design procedure of the traction machine full-strength construction by projected service life |
|
|
Khodes I., Shekhovtsov V., Sokolov-Dobrev N., Kosenko V., Klementyev Y., Godzhayev Z.
|
| 卷 76, 编号 11 (2009) |
Procedure of calculating the rational link composition of production line for the fertilizers and ameliorants application |
|
|
Dyachkov A., Kolesnikov N.
|
| 卷 80, 编号 3 (2013) |
Calculation method of resistance and moment of resistance to soil cutting |
|
|
Akimov A., Konstantinov Y., Fedorov D.
|
| 卷 86, 编号 5 (2019) |
Methods of calculating the resistance and the moment of resistance to cutting the soil with a straight blade knife cutters |
(Rus)
|
|
Konstantinov Y.
|
| 卷 77, 编号 2 (2010) |
Procedure of designing heat in the thermal balance of drying installation |
|
|
Soyak M., Glovatskyi S.
|
| 卷 85, 编号 1 (2018) |
The method for calculating the traction resistance of a flat disk |
(Rus)
|
|
Akimov A., Konstantinov Y.
|
| 卷 89, 编号 1 (2022) |
Method for analyzing parameters of single-level pneumatic elastic elements with backpressure |
(Rus)
|
|
Nakaznoy O., Tsipilev A.
|
| 卷 89, 编号 6 (2022) |
The method of reasonable selection of a pneumatic tire set for an agricultural tractor |
(Rus)
|
|
Anisimov N.
|
| 卷 80, 编号 6 (2013) |
A way of complex variational problems solution by the collocation method |
|
|
Kovbasa V., Ayubov A., Ignatyev Y.
|
| 卷 91, 编号 3 (2024) |
The method of synthesis of the geometry of the longitudinal profile and the design parameters of the leaf spring using the finite element method |
(Rus)
|
|
Rubanov P., Maksimov R., Chetverikov M.
|
| 卷 90, 编号 6 (2023) |
Method of synthesis of patterns of power distribution between the driving wheels of all-wheel drive agricultural vehicles |
(Rus)
|
|
Keller A., Popov A.
|
| 卷 91, 编号 3 (2024) |
The method for comparing different blade shapes of flat knives of a rotary cultivator |
(Rus)
|
|
Kudzaev A., Kalagova R.
|
| 卷 78, 编号 9 (2011) |
A method of comparative analysis of the locking principles of interaxle power distribution units |
|
|
Kotovskov A., Potapov P., Simonov D.
|
| 卷 78, 编号 2 (2011) |
A method of accounting mechanized work in the agricultural service enterprises |
|
|
Ismailov I.
|
| 卷 88, 编号 4 (2021) |
Methodology for the numerical solution of problems in relation to the coil-type electric heat exchangers for heating fuel |
(Rus)
|
|
Krokhta G., Khomchenko Y., Usatykh N.
|
| 卷 78, 编号 10 (2011) |
Methodical recommendations on the evaluation of needs for crop production technologies in agriculture |
|
|
Yelizarov V., Antyshev N., Beylis V.
|
| 卷 91, 编号 4 (2024) |
The HVAC system engineering method for a new family of unified cabins of combine harvesters |
(Rus)
(Eng)
|
|
Maslensky V., Bulygin Y., Pavlikov A.
|
| 卷 79, 编号 8 (2012) |
A technique for the improvement of working parts of grain combines |
|
|
Berdyshev V.
|
| 卷 77, 编号 9 (2010) |
Methods of adaptive tuning of regulators |
|
|
Soldatov V., Lipa O.
|
| 卷 86, 编号 5 (2019) |
Methods for assessing the contact area of wheel propellers with a support base |
(Rus)
|
|
Revenko V., Godzhaev Z., Rusanov A.
|
| 卷 76, 编号 3 (2009) |
Methods of drying and their effect on the heatenergy consumption |
|
|
Glovatskyi S., Soyak M., Sivets S.
|
| 卷 77, 编号 7 (2010) |
Metrological support of a technology allowing to assess production fitting to certification |
|
|
Sapozhnikov I.
|
| 卷 77, 编号 2 (2010) |
Measuring rod - indicator |
|
|
Kiselev G.
|
| 卷 76, 编号 2 (2009) |
Mechanization of agriculture and its effect onthe efficiency of labor and productivity of arable land |
|
|
Shevtsov V., Reingart E., Keller N.
|
| 卷 82, 编号 10 (2015) |
Mechanization of harvesting of mixed sowing of cereal crops |
|
|
Aldoshin N., Zolotov A., Tsygutkin A., Malla B.
|
| 卷 77, 编号 1 (2010) |
New mechanization means for berries harvesting and maintenance of plantations |
|
|
Bychkov V., Kadykalo G., Yspenskiy I., Chetvertakov A.
|
| 卷 76, 编号 3 (2009) |
Simple gear differential lock |
|
|
Gorshkov Y., Starunova I., Dmitriev M., Jitenko I., Polunin G.
|
| 卷 76, 编号 3 (2009) |
Mechanism of wearing and destruction ofbearings in the context of energetic positions |
|
|
Psyukalo S., Seregin A., Sklyar V.
|
| 卷 90, 编号 6 (2023) |
The procedure for improving the management of the maintenance and repair process using the neural network technology |
(Rus)
(Eng)
|
|
Shimokhin A., Kirasirov O.
|
| 卷 81, 编号 5 (2014) |
Mechanical seeder for encapsulated seeds |
|
|
Tyrnov Y., Balashov A., Belogorskiy V., Strygin S., Sukhov A.
|
| 卷 91, 编号 6 (2024) |
Microwave unit for continuous heat treatment of poultry muscle stomachs |
(Rus)
|
|
Poruchikov D., Prosviryakova M., Tikhonov A., Fedorov M.
|
| 卷 80, 编号 12 (2013) |
Microprocessor control of fuel supply in diesel-generator |
|
|
Ageyev V., Dushutin K., Vantyusov Y., Dudin A.
|
| 卷 78, 编号 1 (2011) |
Minimization of thickness variation of hollow fingers' billets on the base of mathematical modeling |
|
|
Dementyev V., Zasypkin A., Sterkhov M., Sukhikh A.
|
| 卷 80, 编号 12 (2013) |
The 65th anniversary of M.M. Kovaliov |
|
|
- -.
|
| 卷 79, 编号 7 (2012) |
The 70th anniversary of M.M. Firsov |
|
|
- -.
|
| 卷 79, 编号 2 (2012) |
A multiparameter fuel characteristic of the Cummins diesel |
|
|
Gorodetskiy K., Golnev V., Yershov Y., Raskin A., Prischepenko A., Shuvayev D.
|
| 卷 79, 编号 12 (2012) |
Multioperation aggregates on the base of mobile power machines of 5th generation |
|
|
Lipkovich E.
|
| 卷 79, 编号 5 (2012) |
A multifunctional soil cultivating resource-saving machine |
|
|
Kuzmin M.
|
| 卷 81, 编号 4 (2014) |
Multipurpose energotechnological assembly for a farm household |
|
|
Zazulya A., Shuvalov A., Nabatov K., Mashkov A.
|
| 卷 85, 编号 4 (2018) |
Multifunctional coulter of a tilled seeding-machine |
(Rus)
|
|
Rudenko N., Kulaev E., Rudenko V., Seminskij A.
|
| 卷 81, 编号 2 (2014) |
Mobile device for anticorrosive protection of agricultural machinery with sluggish greases |
|
|
Petrashev A., Knyazeva L., Klepikov V., Pluzhnikov M.
|
| 卷 80, 编号 6 (2013) |
Mobile aggregate for seed treatment in continuous mode |
|
|
Vyalykh V., Aliokhin V., Savushkin S., Vyalkov V.
|
| 卷 79, 编号 2 (2012) |
Models with a random frequency for the imitation of input disturbances and statistical calculation of nonlinear systems within the correlation theory |
|
|
Soloveychik A.
|
| 卷 76, 编号 2 (2009) |
Simulation of processes of interaction with deformableground for small-sized transport means taking into accountthe ecological requirements |
|
|
Dzotsenidze T.
|
| 卷 81, 编号 1 (2014) |
Modeling of interaction between a high-elastic tire and a road hump |
|
|
Pryadkin V., Godzhayev Z.
|
| 卷 90, 编号 2 (2023) |
Motion simulation and calculation of the components of the lateral forces of the guiding wheels of a cotton-harvesting machine |
(Rus)
|
|
Azimov B., Ikhsanova S.
|
| 卷 79, 编号 7 (2012) |
Modeling of dynamics of a crawler band with elastomer wideners |
|
|
Abyzov A.
|
| 卷 78, 编号 6 (2011) |
Modeling the quality costs of engineering products |
|
|
Zharikov R.
|
| 卷 77, 编号 2 (2010) |
Simulation and design of output of cotton harvesting machines |
|
|
Yuldashev S., Rizaev A., Juldashev A., Kuldashev D.
|
| 卷 80, 编号 12 (2013) |
Modeling of controlled accuracy parameters of production machinery assemblies depending on the basic parts wear |
|
|
Komarov V., Grigoryev A.
|
| 卷 81, 编号 8 (2014) |
Modeling of loads in hydrostatic power drive joints |
|
|
Senin P., Zemskov A., Stolyarov A., Ionov P.
|
| 卷 82, 编号 3 (2015) |
Modeling of reliability when designing soil cutting parts of agricultural machines |
|
|
Myalenko V.
|
| 卷 76, 编号 5 (2009) |
Modelirovanie nizkotemperaturnogo samovosplameneniya kapel' dizel'nogo topliva |
|
|
Basevich V., Frolov S., Gots A.
|
| 卷 81, 编号 12 (2014) |
Modeling of optimal number of managers in the field of engineering support, supply and sales activity by the example of instructional farms |
|
|
Mozhayev Y., Mozhayev A.
|
| 卷 77, 编号 10 (2010) |
Simulation of parameters of the wheeled transport-and-traction vehicle with regard to its use in farm enterprises and in personal subsidiary plots |
|
|
Zagarin D., Dzotsenidze T.
|
| 卷 88, 编号 2 (2021) |
Modeling the parameters of free and driving wheel rolling modes taking into account the asymmetry of the normal reaction diagram |
(Rus)
|
|
Romanchenko M.
|
| 卷 82, 编号 4 (2015) |
Tractor gear shift modeling |
|
|
Gorodetskiy K., Melnikov A., Muratova S., Alendeyev Y.
|
| 卷 87, 编号 2 (2020) |
Modeling a pneumohydraulic sprayer for irrigation and fertigation |
(Rus)
|
|
Gorobej V., Moskalevich V.
|
| 卷 84, 编号 10 (2017) |
Simulation of the process of shipping and stowing cabbage in containers with gentle machine-harvesting regime of cabbage |
(Rus)
|
|
Alatyrev S., Kruchinkina I., Alatyrev A., Yurkin A.
|
| 卷 76, 编号 12 (2009) |
Simulation of grain destruction process with the use of computer |
|
|
Solntsev R.
|
| 卷 91, 编号 1 (2024) |
Simulation of alternative fuel combustion process in internal combustion engines |
(Rus)
(Eng)
|
|
Boloev P., Bodyakina T., Gergenova T., Enina N.
|
| 卷 85, 编号 4 (2018) |
Simulation of combustion process in the forced transport diesel engine with the prescribed law of mixture formation |
(Rus)
|
|
Kamaltdinov V., Markov V., Lysov I., Popov A., Smolij A.
|
| 卷 83, 编号 8 (2016) |
Simulation of the formation of vibration loading of operator workplace of industrial tractor |
(Rus)
|
|
Berezin I., Pronina Y., Bondar' V., Vershinskiy L., Taranenko P.
|
| 卷 77, 编号 9 (2010) |
Simulation of functioning processes of machine-tractor unit |
|
|
Kalachin S.
|
| 卷 80, 编号 8 (2013) |
Modeling of spring tines of combined cultivators |
|
|
Fiodorov S., Chatkin M., Kostin A., Gorodskov S.
|
| 卷 84, 编号 7 (2017) |
Modeling the operation of a screw L-shaped knife of a tiller |
(Rus)
|
|
Dranyaev S., Chatkin M., Koryavin S.
|
| 卷 91, 编号 6 (2024) |
Modeling the working process of a gas-diesel engine running on ammonia with the addition of hydrogen |
(Rus)
|
|
Galyshev Y., Xinyao L., Abyzov O., Zaitsev A.
|
| 卷 82, 编号 5 (2015) |
Modeling of work process of grain crusher ejector |
|
|
Bulatov S.
|
| 卷 76, 编号 5 (2009) |
Modelirovanie rabochikh organov pochvoobrabatyvayushchikh mashin i analiz ikh vzaimodeystviya s uchetom reologicheskikh svoystv pochvy |
|
|
Gafarov A., Mudarisov S., Farkhutdinov I.
|
| 卷 83, 编号 11 (2016) |
Simulation of power parameters of track mover of a tractor |
(Rus)
|
|
Romanchenko M.
|
| 卷 76, 编号 10 (2009) |
Simulation of system way-tractor-driver with regard to evening-out microprofile of support base by tire |
|
|
Nosov S., Kindyukhin Y.
|
| 卷 84, 编号 1 (2017) |
SIMULATION OF AUTOMATIC CONTROL SYSTEMS OF TILLAGE UNITS |
(Rus)
|
|
PARKHOMENKO S., PARKHOMENKO G.
|
| 卷 77, 编号 2 (2010) |
Simulation of articulated transport-and-technological systems |
|
|
Bazhenov Y.
|
| 卷 78, 编号 5 (2011) |
Modeling of soyа plants cutting with a reaper knife |
|
|
Vyazmin M.
|
| 卷 81, 编号 10 (2014) |
Modeling of thermal stress condition of combustion head of tractor diesel engine |
|
|
Gots A., Prygunov M.
|
| 卷 77, 编号 9 (2010) |
Simulation of machine-tractor unit traction load |
|
|
Turgiyev A., Karapetyan M.
|
| 卷 85, 编号 3 (2018) |
Modeling the movement control of a wheeled agricultural machine in real time |
(Rus)
|
|
Nenajdenko A., Poddubnyj V., Valekzhanin A.
|
| 751 - 900 的 2371 信息 |
<< < 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 > >> |
