| Issue |
Title |
File |
| Vol 88, No 3 (2021) |
Compressor type engine brake |
(Rus)
|
|
Verbitskiy V.V., Pogosyan V.M.
|
| Vol 87, No 3 (2020) |
Computational and experimental assessment of the influence of ultra-low pressure tires of mobile power equipment on soil |
(Rus)
|
|
Godzhaev Z.A., Goncharenko S.V., Artemov A.V., Pryadkin V.I., Godzhaev T.Z.
|
| Vol 91, No 4 (2024) |
Computational and experimental studies of vibration-protective properties of a pneumatic wheel of the MTZ-82 BELARUS tractor with external spring-hydraulic mini-suspension |
(Rus)
|
|
Novikov V.V., Pozdeev A.V., Chumakov D.A., Kolesov N.M., Timoshin N.V., Kagochkin T.A., Skribunova V.E.
|
| Vol 91, No 2 (2024) |
Computational study of the gas-dynamic approach for noise reduction in the two-stroke engine’s exhaust system |
(Rus)
(Eng)
|
|
Chernousov A.A., Enikeev R.D., Dadashov R.Е.
|
| Vol 80, No 1 (2013) |
Computer model of particle motion in the chopping unit |
|
|
Belov M.I., Gubernskiy A.Y., Pronin V.Y.
|
| Vol 82, No 10 (2015) |
Computer model of soil cultivation with a tiller |
|
|
Ramazanova G.G., Belov M.I., Gadzhiyev P.I.
|
| Vol 76, No 11 (2009) |
Computer modeling of optimal conditions for sulfochromium plating |
|
|
Dumnov S.N., Labarov D.B., Rusanov V.A., Sharpinskiy D.Y.
|
| Vol 77, No 3 (2010) |
Computer separator for the grain cleaning |
|
|
Yampilov S.S., Tsybenov Z.B., Tsydypov T.T.
|
| Vol 86, No 2 (2019) |
Computer simulation of the «engine - working machine» mechanical system |
(Rus)
|
|
Delyagin V.N., Dobrolyubov I.P.
|
| Vol 91, No 4 (2024) |
Computer simulation of the truck cabin tests to find ways to meet the requirements of the UNECE Regulation 29 |
(Rus)
|
|
Sergievsky S.A., Trusova Y.P., Morozova A.A., Makarov V.S., Shmelev A.A., Mansurov T.N.
|
| Vol 91, No 1 (2024) |
Conceptual directions for the development of driverless agricultural mobile power units |
(Rus)
(Eng)
|
|
Starostin I.A., Eshchin A.V., Godzhaev T.Z., Davydova S.A.
|
| Vol 78, No 8 (2011) |
Conditions for the formation of oscillations in the engine - torque converter system of class 3 caterpillar tractor |
|
|
Zhidkov G.I.
|
| Vol 78, No 4 (2011) |
Conditions of self-cleaning of vibrating harrow teeth |
|
|
Iskenderov E.B.
|
| Vol 77, No 11 (2010) |
Conditions of the least traumatization of seeds during the subsoil-broadcast sowing |
|
|
Machnev A.V.
|
| Vol 76, No 2 (2009) |
Cone chopper in the line for productionfeeds, mixtures and additives |
|
|
Antimonov S.V., Trofimov V.A.
|
| Vol 77, No 7 (2010) |
Conference on the resource-saving technologies |
|
|
- -.
|
| Vol 79, No 9 (2012) |
Configuration of vortex chambers and air flow velocity in the crushing chamber of a hammer crusher |
|
|
Baranov N.F., Zykin A.A.
|
| Vol 81, No 4 (2014) |
Conservation device for bushing-roller chains |
|
|
Prokhorenkov V.D., Balashov A.V., Klepikov V.V., Shumov Y.A.
|
| Vol 80, No 2 (2013) |
Construction and kinematics of piece-production packers |
|
|
Belov M.I., Pavlov A.Y., Sorokin S.V.
|
| Vol 76, No 8 (2009) |
Construction of combustion chamber and fatigue durability of tractor diesel pistons |
|
|
Glinkin S.A., Gots A.N., Ivanchenko A.B.
|
| Vol 80, No 4 (2013) |
Construction types of inertia and friction dampers, their modeling and testing |
|
|
Ryabov I.M., Novikov V.V., Pozdeyev A.V., Chernyshov K.V., Mitroshenko A.S.
|
| Vol 79, No 11 (2012) |
Constructional and technological characteristic of a shutter air cleaner with curvilinear diversion canal |
|
|
Saitov V.Y., Farafonov V.G., Suvorov A.N.
|
| Vol 78, No 1 (2011) |
Constructional and technological improvements for corn harvesting unit |
|
|
Truflyak Y.V., Trubilin Y.I., Maslov G.G.
|
| Vol 80, No 7 (2013) |
Constructional and technological pattern of a universal brush cutter with skidding tongs |
|
|
Adbrazakov F.K., Khalmetov A.A.
|
| Vol 80, No 2 (2013) |
Constructional characteristic of a scraping transporter designed for sugar beet mother plants taking from bunker |
|
|
Yemelyanov P.A., Ovtov V.A.
|
| Vol 78, No 10 (2011) |
Constructive and kinematic parameters of fruit grading machine |
|
|
Chetvertakov A.V.
|
| Vol 82, No 5 (2015) |
Constructive and technological diagram of a mounted plough for tractors of 300-400 kW power |
|
|
Boykov V.M., Pobezhimov G.B.
|
| Vol 80, No 1 (2013) |
Continuously variable hydrovolumetric mechanical gearbox for 220-240 hp tractors |
|
|
Samorodov V.B., Kalinin S.V., Zabelyshinskiy Z.E., Shuba S.A., Derkach O.I.
|
| Vol 79, No 3 (2012) |
Continuously variable two-flow hydrovolumetric mechanical gearbox for a tractor with 350-400 hp engine |
|
|
Samorodov V.B., Shuba S.A., Derkach O.I.
|
| Vol 81, No 8 (2014) |
Contribution of teaching and learning commission to the development of higher automotive education |
|
|
Serebryakov V.V., Kravets V.N.
|
| Vol 81, No 8 (2014) |
Control and adjustment of grain temperature in tower driers |
|
|
Andrianov N.M., Mei S., Chen Z., Li Z.
|
| Vol 79, No 8 (2012) |
Control circuit of the grain cleaner bucket-elevator with RM 35SO speed control relay |
|
|
Mazukha N.A., Mazukha A.P.
|
| Vol 90, No 6 (2023) |
Control laws for individual traction electric drive of a front loader |
(Rus)
|
|
Gartfelder V.A., Stadukhin A.A., Mokretsov N.A.
|
| Vol 86, No 4 (2019) |
Control of fuel sprays activity in starting and after starting warm-up periods of diesel engine |
(Rus)
|
|
Krohta G.M.
|
| Vol 79, No 7 (2012) |
Control of gear shift in a transmission with three degrees of freedom |
|
|
Derzhanskiy V.B., Taratorkin I.A., Abdulov S.V.
|
| Vol 76, No 8 (2009) |
Control of internal combustion engine regimes with the use of mathematical model |
|
|
Makushin A.A., Zubkov E.V., Bakhvalova V.S., Ilyukhin A.N.
|
| Vol 76, No 9 (2009) |
Control of mechanical stepless transmission |
|
|
Blagonravov A.A., Revnyakov Y.N.
|
| Vol 76, No 3 (2009) |
Control of MTA (machine-and-tractor unit) work bymeans of perforated foil |
|
|
Tyutrin S.G.
|
| Vol 79, No 4 (2012) |
Control of reliability level of agricultural tractors based on the estimation of its manufacturing, maintenance and repair cost |
|
|
Plaksin A.M., Gulyarenko A.A.
|
| Vol 79, No 6 (2012) |
Control of the separation process of potato combine |
|
|
Slavkin V.I., Belov S.V., Zhuravliov A.V., Lobachevskiy P.Y., Pronin V.Y.
|
| Vol 76, No 7 (2009) |
Control of tuning all combine safety couplings through the drive gears |
|
|
Garanin G.V.
|
| Vol 79, No 1 (2012) |
Control system of electromechanical transmission of the mobile power module |
|
|
Levtsev A.P., Dushutin K.A., Maltsev S.A., Mindrov K.A.
|
| Vol 76, No 3 (2009) |
Conversion of МТП (machine-and-tractorfleet) of the Leningrad region to natural gas |
|
|
Shimchenko N.I., Penkin A.L., Dubnikov D.V.
|
| Vol 80, No 11 (2013) |
Conversion technology of track pin production |
|
|
Dementyev V.B., Zasypkin A.D.
|
| Vol 77, No 2 (2010) |
Converter for mechanical stepless transmissions of automobiles and tractors |
|
|
Blagonravov A.A., Tereshin A.V.
|
| Vol 81, No 12 (2014) |
Conveyor sorting device for potato tubers |
|
|
Maksimov P.L., Pozdeyev A.V., Krylov N.V.
|
| Vol 82, No 8 (2015) |
Coordinate calculation method of steering linkage |
|
|
Malinovskiy M.P., Gladov G.I.
|
| Vol 79, No 9 (2012) |
Coordination of functioning of cylindrical sieves of а grain separator |
|
|
Zholobov N.V., Farafonov V.G., Yakimov A.V.
|
| Vol 80, No 4 (2013) |
Corrosive medium exposure protection of brass parts of agricultural machinery |
|
|
Polischuk S.D., Gorokhova M.N.
|
| Vol 79, No 4 (2012) |
Counterfeiting as a threat to the business security |
|
|
- -.
|
| Vol 79, No 1 (2012) |
Crawler farm tractor gearbox equipped with gear shift under load and preselector speed range shift |
|
|
Lysov A.M.
|
| Vol 85, No 2 (2018) |
Creating a domestic caterpillar tractor for modern agricultural production |
(Rus)
|
|
Sharipov V.M., Izmaylov A.Y., Dorokhov A.S., Fedotkin R.S., Kryuchkov V.A., Esenovskiy-Lashkov M.Y., Ovchinnikov E.V.
|
| Vol 87, No 6 (2020) |
Creation and study of the properties of multicomponent biofuels for tractor diesel engines |
(Rus)
|
|
Plotnikov S.A., Kartashevich A.N., Glushkov M.N., Shipin A.I.
|
| Vol 79, No 4 (2012) |
Creative development of academician D.S. Strebkov |
|
|
- -.
|
| Vol 80, No 9 (2013) |
Criteria of a balanced system of indices and functional tolerances for efficiency assessment of machine and tractor aggregate on the base of tractor with constant power engine |
|
|
Eviyev V.A., Ochirov N.G., Baskhayev N.B.
|
| Vol 77, No 11 (2010) |
Criterial index for the assessment of economical effectiveness of new technique and technologies introduction |
|
|
Shmidt R.G., Zvyagintsev P.S., Volkova N.G.
|
| Vol 77, No 6 (2010) |
Criterion of organo-mineral fertilizers application efficiency |
|
|
Zapevalov M.V.
|
| Vol 81, No 8 (2014) |
Cultivator for preplanting cultivation equipped with rope working organ |
|
|
Telichkina N.A.
|
| Vol 79, No 8 (2012) |
Current problems of agricultural mechanics |
|
|
- -.
|
| Vol 89, No 4 (2022) |
Curvilinear motion control laws for a semi-trailer caterpillar train for off-road cargo transportation |
(Rus)
|
|
Evseev K.B.
|
| Vol 79, No 8 (2012) |
Customs legislation prevents investors from replacing defective equipment by a serviceable one |
|
|
- -.
|
| Vol 76, No 2 (2009) |
Damage of buckwheat seeds by their repeatedpassing through machines |
|
|
Trotsenko V.V.
|
| Vol 80, No 6 (2013) |
Decrease of tractive resistance of combined wide-coverage machines |
|
|
Konstantinov M.M., Drozdov S.N.
|
| Vol 77, No 1 (2010) |
Decreasing nitrogen contents in exhaust gases of diesel with turbo-supercharging by the use of natural gas |
|
|
Likhanov V.A., Lopatin O.P.
|
| Vol 79, No 9 (2012) |
Decreasing of carbon dust emissions with the exhaust gases of diesel engines by the application of alternative fuels |
|
|
Likhanov V.A., Rossokhin A.V., Chuprakov A.I.
|
| Vol 77, No 9 (2010) |
Decreasing of harmful action of tractor wheeled movers on the waterlogged soil |
|
|
Makhmutov M.M., Zaikina I.V., Gadzhiyev P.I.
|
| Vol 76, No 8 (2009) |
Deere & Company declares the intention of widening its business in Russia |
|
|
- -.
|
| Vol 76, No 11 (2009) |
Deformation and change of density of soil under the caterpillar machine's track |
|
|
Nosov S.V., Peregudov N.Y.
|
| Vol 77, No 4 (2010) |
Deformation of soil with double-mouldboard plough during the broadcast seeding in the irrigated crop farming |
|
|
Saakyan S.L.
|
| Vol 78, No 2 (2011) |
Degree of irregularity of the moment of resistance to the wheel propeller running |
|
|
Makhmutov M.M., Makhmutov M.M., Slavkin V.I.
|
| Vol 90, No 1 (2023) |
Dependence of corn kernel strength on moisture |
(Rus)
|
|
Poghosyan V.M., Mechkalo A.L., Poluektov A.A.
|
| Vol 79, No 3 (2012) |
Dependence of movements of the control system regulating body on the index of oscillation |
|
|
Lipa O.A.
|
| Vol 84, No 11 (2017) |
Dependence of the agrotech-nical clearance under the front axle of a cotton tractor with a wheel arrangement 4K4a on the dimensions of the pivot pin, the size of the tires of the steered wheels and the angles of their installation |
(Rus)
|
|
Kambarov B.A.
|
| Vol 78, No 10 (2011) |
Dependence of the time-section of gas distribution mechanism on the valve lift height |
|
|
Zholobov L.A., Dydykin A.M., Suvorov Y.A.
|
| Vol 81, No 10 (2014) |
Dependence of tubers damage on the parameters of rotary separator of potato combine |
|
|
Shukhanov S.N., Kuzmin A.V., Ostroumov S.S.
|
| Vol 82, No 1 (2015) |
Dependence of wheeled mover slipping on traction force |
|
|
Zhulay V.A., Yenin V.I., Kozhakin Y.V.
|
| Vol 81, No 11 (2014) |
Design and technological features of three-dimensional systems of frame-panel construction of tractors and cars |
|
|
Zagarin D.A., Dzotsenidze T.D., Kozlovskaya M.A.
|
| Vol 80, No 1 (2013) |
Design basis for chain gears with increased gear ratios |
|
|
Khabrat N.I., Umerov E.D.
|
| Vol 87, No 4 (2020) |
Design characteristics of an armored tractor for hot climate |
(Rus)
|
|
Semenov A.G.
|
| Vol 78, No 11 (2011) |
Design features of fan's working wheel |
|
|
Shukhanov S.N., Khankhasayev G.F., Punsukov A.S.
|
| Vol 82, No 3 (2015) |
Design improvement of bearing unit of turbocharger of internal combustion engine |
|
|
Nikishin V.N., Luscheko V.A.
|
| Vol 82, No 9 (2015) |
Design improvement of extruder |
|
|
Kushnir V.G., Gavrilov N.V., Kim S.A., Kabdusheva A.S., Femyak N.V.
|
| Vol 82, No 1 (2015) |
Design improvement of plough harrow |
|
|
Kushnir V.G., Benyukh O.A.
|
| Vol 79, No 3 (2012) |
Design improvement of the radial deformation limiter for the rubber-metal swivel joint of crawler-mounted mover |
|
|
Korosteliov S.A.
|
| Vol 84, No 3 (2017) |
DESIGN METHOD OF PIN ENGAGEMENT DRIVE SPROCKETSWITH RUBBER-REINFORCED TRACKS OF TRACTION AND TRANSPORTATION VEHICLES |
(Rus)
|
|
Fedotkin R.S., Kryuchkov V.A., Beynenson V.D., Parfenov V.L.
|
| Vol 86, No 4 (2019) |
Design of a torque sensor on the shafts of a wheeled tractor |
(Rus)
|
|
Gerashchenko V.V., Loubach V.P., Kovalenko N.A.
|
| Vol 77, No 12 (2010) |
Design of dynamic stability of rotating components |
|
|
Yegozhev A.M., Polischuk Y.A.
|
| Vol 77, No 12 (2010) |
Design procedure of main parameters of the axial single-disk brake |
|
|
Khabrat N.I.
|
| Vol 80, No 1 (2013) |
Design procedure of the traction machine full-strength construction by projected service life |
|
|
Khodes I.V., Shekhovtsov V.V., Sokolov-Dobrev N.S., Kosenko V.V., Klementyev Y.V., Godzhayev Z.A.
|
| Vol 81, No 4 (2014) |
Design quality control of small-scale mechanization mean of 0,2 tractive class |
|
|
Devyanin S.N., Sapozhnikov I.I.
|
| Vol 81, No 8 (2014) |
Design workflow for load-bearing parts by the example of interaxle differential lock fork of a multiaxial wheeled vehicle |
|
|
Vdovin D.S., Kotiyev G.O.
|
| Vol 77, No 5 (2010) |
Designing a gas distribution mechanism for motor and tractor diesel |
|
|
Makushin A.A.
|
| Vol 76, No 12 (2009) |
Designing chopper of forage harvester with an accelerator of plants unloading |
|
|
Chepurnoi A.I., Belov M.I., Slavkin V.I., Kozlov V.V., Pronin V.Y.
|
| Vol 79, No 11 (2012) |
Designing conception of innovative development and modernization of integrated mechanization of agro-industrial complex for the period up to 2025 |
|
|
Beylis V.M., Antyshev N.M.
|
| Vol 78, No 2 (2011) |
Designing of an Altai tractor with electromechanical transmission |
|
|
Kulakov A.T., Makushin A.A.
|
| Vol 77, No 10 (2010) |
Designing of profile and maximum of speed for grain layer moving on the flat vibrating sieve |
|
|
Tischenko L.N., Olshanskiy V.P., Olshanskiy S.V.
|
| Vol 77, No 1 (2010) |
Designing reliability of cylindrical springs by complicated loading |
|
|
Mart'yanov A.P., Markin O.Y., Yakhin S.M., Mart'yanov S.A.
|
| Vol 78, No 9 (2011) |
Designing the geometrical parameters of interacting surfaces of internal combustion engine parts |
|
|
Kochenov V.A.
|
| Vol 80, No 12 (2013) |
Deterioration of A-hoe blades of Morris sowing machine renewed by means of thermostrengthened compensating elements |
|
|
Mikhalchenkov A.M., Feskov S.A.
|
| Vol 83, No 10 (2016) |
Determination method of rational design parameters for four-shaft not-coaxial preselector transmissions of agricultural tractors |
(Rus)
|
|
Sharipov V.M., Nyunin B.N., Kryuchkov V.A., Fedotkin R.S., Alendeev E.M., Timofievskiy A.A.
|
| Vol 89, No 5 (2022) |
Determination of biogas fuel compression ratio for agricultural machinery fueling |
(Rus)
|
|
Petrov N.V.
|
| Vol 82, No 2 (2015) |
Determination of critical changes in health condition of tractor operator |
|
|
Sergiyenko N.Y., Marenich A.N., Sergiyenko D.Y.
|
| Vol 83, No 1 (2016) |
Determination of diameter of a cutter drum with two-step F-shaped knives |
(Rus)
|
|
Makhmutov M.M., Khismatullina Y.R., Tepikin A.I., Bykovskiy S.V., Dzhabbarov A.K., Alimov A.S., Makhmutov M.M.
|
| Vol 84, No 2 (2017) |
DETERMINATION OF DIFFERENT METHODS OF TRACTORS DIESEL ENGINE PRE-START PREPARATION AT ITS STARTING CHARACTERISTICS |
(Rus)
|
|
Bondar V.N.
|
| Vol 84, No 8 (2017) |
Determination of gas concentration in the lubricant of transmissions of energy-saturated agricultural tractors |
(Rus)
|
|
Shukhanov S.N.
|
| Vol 86, No 1 (2019) |
Determination of lateral tire drag coefficients to achieve the required performance characteristics of machine-tractor unit |
(Rus)
|
|
Sergeev N.V., Sen'kevich S.E.
|
| Vol 82, No 8 (2015) |
Determination of maximal slipping of wheeled movers taking into account the limiting of their impact on soil |
|
|
Nadykto V.T.
|
| Vol 81, No 7 (2014) |
Determination of normal responses of a moving wheeled machine and coefficients of their redistribution on axles |
|
|
Mamiti G.I., Tedeyev V.B.
|
| Vol 82, No 12 (2015) |
Determination of optimality criteria in the development of hardening technologies |
|
|
Dementyev V.B., Zasypkin A.D.
|
| Vol 81, No 8 (2014) |
Determination of parameters of adaptive friction clutches with single-loop negative feedback |
|
|
Shishkarev M.P., Vu T.D.
|
| Vol 82, No 12 (2015) |
Determination of performance indicators of machine-tractor unit by tractor characteristic with a sector of constant tractive power |
|
|
Eviyev V.A., Bukadzhinov P.V., Ochirov N.G.
|
| Vol 83, No 10 (2016) |
Determination of quality of cultivation by means of soil spiker |
(Rus)
|
|
Kovalev M.M., Sheychenko V.A., Shevchuk V.V., Fadeev V.G.
|
| Vol 82, No 7 (2015) |
Determination of rational parameters of bogies in order to decrease negative reaction torques on frame |
|
|
Martynov B.G., Kozlenok A.V.
|
| Vol 83, No 5 (2016) |
Determination of reactions of bearing surface on the wheels of tractor with frame stabilization |
(Rus)
|
|
Mamiti G.I., L'yanov M.S., Pliev S.K., Zokoev A.O., Salbieva Z.S., Tedeev V.B.
|
| Vol 81, No 4 (2014) |
Determination of service-area radius of machinery recycling enterprise |
|
|
Aldoshin N.V., Lylin N.A.
|
| Vol 82, No 1 (2015) |
Determination of shavings area during the operation of tillers |
|
|
Makhmutov M.M., Bykovskiy V.S.
|
| Vol 81, No 1 (2014) |
Determination of soil volume required for high-quality embedding of seed onion bulbs into a furrow |
|
|
Yemelyanov P.A., Sibirev A.V., Aksenov A.G.
|
| Vol 91, No 3 (2024) |
Determination of stiffness and damping characteristics of the adaptive suspension system to develop the optimal control of the simulation bench |
(Rus)
|
|
Godzhaev Z.A., Senkevich S.E., Malakhov I.S., Ilchenko E.N., Uyutov S.Y.
|
| Vol 83, No 11 (2016) |
Determination of stiffness parameters of toothed gears of automobiles and tractors |
(Rus)
|
|
Tarasik V.P.
|
| Vol 86, No 6 (2019) |
Determination of the effect on the energy intensity of granulation of the radii of the working bodies of the press granulator |
(Rus)
|
|
Polishchuk V.Y., Panov E.I., Vasilevskaya S.P.
|
| Vol 90, No 5 (2023) |
Determination of the efficiency of a plowing unit with an electro-hydraulic control system of working bodies |
(Rus)
|
|
Belchik L.D., Ananchikov A.A.
|
| Vol 88, No 2 (2021) |
Determination of the optimal composition of mixed fuel based on environmental indicators of diesel engine |
(Rus)
|
|
Plotnikov S.A., Gnevashev P.V.
|
| Vol 88, No 1 (2021) |
Determination of the optimal composition of mixed fuel based on the environmental performance of a diesel engine |
(Rus)
|
|
Plotnikov S.A., Buzikov S.V., Kozlov I.S.
|
| Vol 87, No 4 (2020) |
Determination of the rotation speed of chopped hay on the surface of the separator sieve of the leaf part of herbs |
(Rus)
|
|
Abilzhanuly T., Abilzhanov D.T.
|
| Vol 87, No 4 (2020) |
Determination of the specific soil resistance using deep subsurface tillage in conditions of Northern Kazakhstan |
(Rus)
|
|
Kuvayev A.N.
|
| Vol 86, No 2 (2019) |
Determination of the structure park of semitrailed and trailed machines for applying solid mineral fertilizers |
(Rus)
|
|
Latyshenok M.B., SHemyakin A.V., Terent'ev V.V., Andreev K.P., Makarov V.A., ZHuravleva O.I.
|
| Vol 85, No 6 (2018) |
Determination of the transfer function of the pneumatic suspension of the seat on the hydraulic pulsator stand |
(Rus)
|
|
Lyashenko M.V., Pozdeev A.V., Chumakov D.A., Iskaliev A.I.
|
| Vol 82, No 10 (2015) |
Determination of time for orienting of bulbs in vibration seed cell |
|
|
Yemelyanov P.A.
|
| Vol 82, No 4 (2015) |
Determination of tolerance limits of agricultural machinery adjustable parameters |
|
|
Kapustin V.P., Glazkov Y.Y.
|
| Vol 83, No 12 (2016) |
Determination of traction coefficient of driving wheels of the MTZ-82 tractor |
(Rus)
|
|
Gorodetskiy K.I., Serebryakov V.V., Lavlinskiy A.M.
|
| Vol 78, No 10 (2011) |
Developing a new frame-panel superstructure for caterpillar tractors |
|
|
Dzotsenidze T.D., Ponomarev A.K., Ulyanov O.V., Kozlovskaya M.A., Ilyin V.M.
|
| Vol 90, No 1 (2023) |
Development and research of a new separating device for a cabbage harvester |
(Rus)
|
|
Alatyrev A.S., Emelyanov N.A., Kruchinkina I.S., Alatyrev S.S.
|
| Vol 89, No 4 (2022) |
Development and research of the efficiency of a tractor transmission with a disc type gearbox |
(Rus)
|
|
Polivaev O.I.
|
| Vol 90, No 4 (2023) |
Development and simulation of the Feed Pusher Robot software and hardware system for the maintenance of the feed table at livestock facilities |
(Rus)
|
|
Nikitin E.A., Shilin D.V., Ivanov Y.G., mikhailichenko S.M., Blagov D.A.
|
| Vol 90, No 2 (2023) |
Development and verification of a mathematical model of the wheel mover interaction with deformable soil, based on the application of the method of discrete elements |
(Rus)
|
|
Pashkovsky R.R., Evseev K.B.
|
| Vol 90, No 5 (2023) |
Development and verification of a virtual prototype of a vehicle |
(Rus)
|
|
Zhileykin M.M., Antonyan A.V., Furletov Y.M.
|
| Vol 91, No 5 (2024) |
Development and verification of material models in modeling of wave strain hardening and additive synthesis (3DMP) processes |
(Rus)
|
|
Kirichek A.V., Barinov S.V., Yashin A.V., Fedonina S.O., Androsov K.Y.
|
| Vol 81, No 10 (2014) |
Development issues of innovative system of machines and technologies for plant cultivation |
|
|
Yelizarov V.P., Beylis V.M.
|
| Vol 86, No 3 (2019) |
Development of a front-end loader for an MTZ tractor using 3D modeling |
(Rus)
|
|
Dmitrenko V.P., Adakin R.D., Sockaya I.M., Hot'ko A.A.
|
| Vol 91, No 5 (2024) |
Development of a machine for tillage and sowing of grain crops |
(Rus)
|
|
Eruslanova M.A., Nemtinov K.V., Eruslanov K.A., Nemtinov V.A.
|
| Vol 86, No 6 (2019) |
Development of a method for obtaining a section of reduced stiffness on the elastic characteristic of a vehicle tire |
(Rus)
|
|
Ryabov I.M., Pozdeev A.V., Erontaev V.V., ZHdamirova E.V.
|
| Vol 88, No 6 (2021) |
Development of a methodology for rationing the route fuel consumption of the LIAZ-5256.57 bus in operation |
(Rus)
|
|
Boloyev P.A., Petrov N.V., Skrybykin P.A.
|
| Vol 91, No 5 (2024) |
Development of a new bucket design for a single-bucket hydraulic excavator |
(Rus)
|
|
Buriy G.G., Poteryaev I.K.
|
| Vol 81, No 12 (2014) |
Development of agricultural machinery industry branch in the Republic of Armenia |
|
|
Chibukhchyan S.S.
|
| Vol 83, No 8 (2016) |
Development of combined working organ for graded subsurface tillage |
(Rus)
|
|
Bozhko I.V., Parkhomenko G.G., Gromakov A.V., Kambulov S.I., Rykov V.B.
|
| Vol 85, No 2 (2018) |
Development of elements of technology for increasing the durability of tractor components from gray cast iron |
(Rus)
|
|
Ovsyannikov V.E., Vasil’ev V.I., Terekhov A.S.
|
| Vol 87, No 3 (2020) |
Development of indicators for a comprehensive assessment of the intellectualization of machine production of vegetable crops |
(Rus)
|
|
Dorokhov A.S., Sibirev A.V., Aksenov A.G.
|
| Vol 80, No 7 (2013) |
Development of information technologies in the field of agricultural machinery testing |
|
|
Buklagin D.S.
|
| Vol 88, No 5 (2021) |
Development of machine technology for land rehabilitation |
(Rus)
|
|
Natriashvili T.M., Makharoblidze Z.K., Margvelashvili V.O., Sharashenidze S.G.
|
| Vol 82, No 9 (2015) |
Development of mechanization means for storages of potatoes and vegetables |
|
|
Kolchin N.N., Ponomarev A.G.
|
| 451 - 600 of 2371 Items |
<< < 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 > >> |
