Issue |
Title |
File |
Vol 83, No 10 (2016) |
Revival of domestic agricultural engineering is an urgent and important task of the state |
 (Rus)
|
Kolchin N.N.
|
Vol 83, No 1 (2016) |
Reynolds number effect on the aerodynamic characteristic of transverse fans |
 (Rus)
|
Sychugov N.P.
|
Vol 76, No 2 (2009) |
Rigidity of driving eccentric free-wheel clutch mechanisms |
|
Sharkov O.V.
|
Vol 79, No 11 (2012) |
Rise of adequacy of analytical models with a random frequency to Gaussian processes |
|
Soloveychik A.A.
|
Vol 87, No 6 (2020) |
Road holding ability I.P. of machine-tractor unit during plowing |
 (Rus)
|
Troyanovskaya I.P., Zhakov A.O.
|
Vol 86, No 1 (2019) |
Road tests of an electromechanical wheel tractor motion control systemctor |
 (Rus)
|
Poddubny V.I., Nenaydenko A.S., Baybasarov R.R.
|
Vol 81, No 3 (2014) |
Robot manipulators in agriculture |
|
Belov M.I., Pylayev B.V., Sorokin S.V.
|
Vol 83, No 9 (2016) |
Robotics technology and agrochemical support of plant cultivation |
 (Rus)
|
Sychev V.G., Afanas'ev R.A., Godzhaev Z.A., Grishin A.P., Grishin A.A.
|
Vol 83, No 1 (2016) |
Role of soil bin in studies of processes in the “working organ - soil” system |
 (Rus)
|
Zvolinskiy V.N., Mosyakov M.A., Nikolayenko N.Y.
|
Vol 88, No 1 (2021) |
Role of the Research Institute of Engines (NIID) in the development of special transport engines |
 (Rus)
|
Troitskiy N.I.
|
Vol 77, No 3 (2010) |
Rotary pneumatic screen separator |
|
Yerugin A.F., Osheyko R.S.
|
Vol 80, No 9 (2013) |
Rotary seeder device for smallseeded crops |
|
Ovchinnikov V.A., Chatkin M.N., Dranyayev S.B.
|
Vol 82, No 11 (2015) |
Rotary thrashing and separating devices |
|
Belov M.I., Shreyder Y.M.
|
Vol 76, No 2 (2009) |
Rotational mower with pneumaticdrive of working members |
|
Slivinskyi Y.V., Zaitsev A.A.
|
Vol 80, No 5 (2013) |
Rotor diameter optimization of a soil cultivating machine |
|
Gadzhiyev P.I., Makhmutov M.M., Dzhabbarov A.K.
|
Vol 78, No 11 (2011) |
Roughness of interior surface of hollow fingers and their durability during the non-central direct arch |
|
Zasypkin A.D., Dementyev V.B., Sterkhov M.Y., Churkin A.V.
|
Vol 80, No 2 (2013) |
RUE «Bobruisk plant of tractor parts and units» is FAO qualified supplier |
|
- -.
|
Vol 76, No 12 (2009) |
Runner of the centripetal fan |
|
Borontsoyev A.A.
|
Vol 84, No 11 (2017) |
Running gear of machine-tractor units and their influence on the quality of performed operations |
 (Rus)
|
Kambulov S.I., Rykov V.B., Bozhko I.V., Kolesnik V.V.
|
Vol 78, No 1 (2011) |
Russian combine harvesters with axial-rotor thrеshing-and-separating system |
|
Shreyder Y.M.
|
Vol 80, No 9 (2013) |
Russian market of grain and forage harvesters in 2012 |
|
Yeliseyev A.G.
|
Vol 82, No 1 (2015) |
Safety ensuring in places of painting and fueling of machines and in storages of maintenance services of agroindustrial complex |
|
Burenko L.A., Kazakova V.A., Ivleva I.B.
|
Vol 76, No 12 (2009) |
Safety indices by the use of grain combine harvesters |
|
Gorshkov Y.G., Dmitriev M.S., Zainishev A.V.
|
Vol 86, No 3 (2019) |
Schematization of operational loads on the carrier system of wheeled agricultural vehicles |
 (Rus)
|
Klepcov V.I.
|
Vol 77, No 12 (2010) |
Scheme of filling cells of the seed distributor by pelleted seeds |
|
Avdeyev P.A.
|
Vol 81, No 4 (2014) |
Scraper dispenser |
|
Vedischev S.M., Prokhorov A.V.
|
Vol 81, No 6 (2014) |
Sealing components of sowing device of overpressure |
|
Popov A.Y.
|
Vol 82, No 4 (2015) |
Secondary utilization of waste heat for heat regimes optimization in aggregates of self-propelled vehicles |
|
Krokhta G.M., Ivannikov A.B., Pronin Y.A.
|
Vol 83, No 2 (2016) |
Seeder with bladed and milling working organs |
 (Rus)
|
Yevchenko A.V., Demchuk Y.V., Kobyakov I.D.
|
Vol 86, No 1 (2019) |
Seeder with openers for sowing grain and multi-level application of mineral fertilizers |
 (Rus)
|
Kem A.A.
|
Vol 82, No 10 (2015) |
Seeding of rapeseed by the use of vibration sowing device of a seeder |
|
Vishnyakov A.A., Vishnyakov A.S., Klak A.I.
|
Vol 83, No 6 (2016) |
Seeds handling by means of separation and joining |
 (Rus)
|
Kudi A.N., Dolgunin V.N., Ryabova E.A.
|
Vol 78, No 7 (2011) |
Selecting parameters of vertical mill rotor for tussocks chopping |
|
Gogolev M.M.
|
Vol 85, No 2 (2018) |
Selection of accelerated test modes for the head of cylinder of the automobile diesel engine |
 (Rus)
|
Gots A.N., Klevtsov V.S.
|
Vol 82, No 8 (2015) |
Selection of design parameters and settings of biogas spark-ignition engine on the basis of diesel engine |
|
Larionov L.B., Boloyev P.A., Ilyin P.I.
|
Vol 82, No 3 (2015) |
Selection of geometrical characteristics of diesel injectors’ sprayers |
|
Markov V.A., Devyanin S.N., Loboda S.S.
|
Vol 82, No 6 (2015) |
Selection of process lines for round-bale feed preparation and distribution |
|
Reznik Y.I., Kartashov S.G., Yeremchenko V.I.
|
Vol 82, No 1 (2015) |
Selection of rational parameters for blade rotary working organ on the basis of its kinematic analysis |
|
Akimov A.P., Konstantinov Y.V., Fedorov D.I., Akvilyanova I.N.
|
Vol 82, No 4 (2015) |
Selection of rational parameters for feeding device of installation for feed mixtures preparation |
|
Mokhnatkin V.G., Filinkov A.S., Solonshchikov P.N.
|
Vol 81, No 11 (2014) |
Selection of rational parameters of electromechanical transmissions of tracked vehicles |
|
Yagubov V.F., Strelkov A.G., Kotrovskiy A.A.
|
Vol 84, No 11 (2017) |
Selection of the methanol-rapeseed emulsion composition for its using as fuel for a diesel engine |
 (Rus)
|
Shemyakin A.V., Terent'ev V.V., Panov Y.A., Ivanov A.A.
|
Vol 87, No 3 (2020) |
Selection of the optimal system of differentiated fertilizer application and the laboratory research results in Northern Kazakhstan |
 (Rus)
|
Tokarev I.V., Kuvayev A.N., Derepaskin A.I., Bobkov S.I.
|
Vol 78, No 2 (2011) |
Self-organization and functioning of the technological systems of grain crops harvesting |
|
Konstantinov M.M., Lovchikov A.P., Kazantsev S.A., Nuralin B.N.
|
Vol 80, No 12 (2013) |
Self-steering system for a tractor unit moving in vineyards row spacing |
|
Chupanov M.A.
|
Vol 77, No 1 (2010) |
Separation of slice from soil massif by the action of share edge |
|
Nikolayev V.A., Popov D.V.
|
Vol 80, No 8 (2013) |
Shape of curvilinear separating surfaces of a gravitational separator |
|
Shatskiy V.P., Popov A.Y., Petrischev I.M.
|
Vol 80, No 4 (2013) |
Sieve boot of a grain cleaning machine |
|
Sabiyev U.K., Golovin A.Y.
|
Vol 76, No 3 (2009) |
Simple gear differential lock |
|
Gorshkov Y.G., Starunova I.N., Dmitriev M.S., Jitenko I.S., Polunin G.A.
|
Vol 77, No 2 (2010) |
Simulation and design of output of cotton harvesting machines |
|
Yuldashev S.U., Rizaev A.A., Juldashev A.T., Kuldashev D.A.
|
Vol 90, No 4 (2023) |
Simulation model of a vehicle in the Simulink environment for determining fuel consumption in driving cycles |
 (Rus)
|
Khimchenko A.V., Mishchenko N.I., Bykov V.V.
|
Vol 85, No 3 (2018) |
Simulation modeling of the volumetric hydraulic drive |
 (Rus)
|
Popov A.Y.
|
Vol 91, No 1 (2024) |
Simulation of alternative fuel combustion process in internal combustion engines |
 (Rus)
 (Eng)
|
Boloev P.A., Bodyakina T.V., Gergenova T.P., Enina N.A.
|
Vol 77, No 2 (2010) |
Simulation of articulated transport-and-technological systems |
|
Bazhenov Y.Y.
|
Vol 84, No 1 (2017) |
SIMULATION OF AUTOMATIC CONTROL SYSTEMS OF TILLAGE UNITS |
 (Rus)
|
PARKHOMENKO S.G., PARKHOMENKO G.G.
|
Vol 85, No 4 (2018) |
Simulation of combustion process in the forced transport diesel engine with the prescribed law of mixture formation |
 (Rus)
|
Kamaltdinov V.G., Markov V.A., Lysov I.O., Popov A.E., Smolij A.E.
|
Vol 77, No 9 (2010) |
Simulation of functioning processes of machine-tractor unit |
|
Kalachin S.V.
|
Vol 76, No 12 (2009) |
Simulation of grain destruction process with the use of computer |
|
Solntsev R.V.
|
Vol 77, No 9 (2010) |
Simulation of machine-tractor unit traction load |
|
Turgiyev A.K., Karapetyan M.A.
|
Vol 77, No 10 (2010) |
Simulation of parameters of the wheeled transport-and-traction vehicle with regard to its use in farm enterprises and in personal subsidiary plots |
|
Zagarin D.A., Dzotsenidze T.D.
|
Vol 83, No 11 (2016) |
Simulation of power parameters of track mover of a tractor |
 (Rus)
|
Romanchenko M.I.
|
Vol 76, No 2 (2009) |
Simulation of processes of interaction with deformableground for small-sized transport means taking into accountthe ecological requirements |
|
Dzotsenidze T.D.
|
Vol 76, No 10 (2009) |
Simulation of system way-tractor-driver with regard to evening-out microprofile of support base by tire |
|
Nosov S.V., Kindyukhin Y.Y.
|
Vol 83, No 8 (2016) |
Simulation of the formation of vibration loading of operator workplace of industrial tractor |
 (Rus)
|
Berezin I.Y., Pronina Y.O., Bondar' V.N., Vershinskiy L.V., Taranenko P.A.
|
Vol 84, No 10 (2017) |
Simulation of the process of shipping and stowing cabbage in containers with gentle machine-harvesting regime of cabbage |
 (Rus)
|
Alatyrev S.S., Kruchinkina I.S., Alatyrev A.S., Yurkin A.P.
|
Vol 80, No 3 (2013) |
Simulation testings and modeling of a felling-skidding-processing machine operation in the actual natural conditions |
|
Skrypnik V.I., Kuznetsov A.V., Stepanischev O.E.
|
Vol 79, No 12 (2012) |
Slipping dynamics of a class 1,4 wheeled tractor |
|
Kuznetsov N.G., Gapich D.S., Shiryayeva Y.V.
|
Vol 81, No 9 (2014) |
Slipping of discs of disengaged clutches in tractor gearboxes |
|
Gorodetskiy K.I., Alendeyev Y.M.
|
Vol 81, No 1 (2014) |
Slipping process research of drive wheels of the МТЗ-100 tractor in breakaway and acceleration modes |
|
Loparev A.A., Venglinskiy A.M., Komkin A.S.
|
Vol 81, No 2 (2014) |
Slipping work of speed synchronizer taking into account the influence of drive torque from declutched frictional clutches in a gear box |
|
Sharipov V.M., Kryuchkov V.A.
|
Vol 77, No 3 (2010) |
Small-sized cabbage combine harvester - an effective technology for up-to-date vegetable growing |
|
Alatyrev S.S., Toncheva N.N., Grigoryev A.O., Savelichev K.A., Alatyreva I.S., Vasilyev A.O.
|
Vol 90, No 3 (2023) |
Small-sized unit for the restoration of herbage in mountain meadows and pastures |
 (Rus)
|
Soldatova I.E., Gulueva L.R.
|
Vol 80, No 7 (2013) |
Software for calculation of bearing capacity of shafts and their joints operating in corrosive environments |
|
Chibukhchyan S.S., Stakyan M.G.
|
Vol 80, No 6 (2013) |
Soil compaction by running systems of class 2 tractors |
|
Zakharchenko A.N., Balabanov V.I., Gadzhiyev P.I., Ramazanova G.G.
|
Vol 81, No 6 (2014) |
Soil compaction by track and wheel tractor |
|
Loparev A.A., Komkin A.S.
|
Vol 78, No 9 (2011) |
Soil compaction caused by beet harvesters |
|
Martynov V.M.
|
Vol 90, No 4 (2023) |
Soil cultivating with a tiller with V-shaped knives |
 (Rus)
|
Tarasenko B.F., Niyomuvunyi A., Drobot V.A., Rudnev S.G., Blinova A.I.
|
Vol 82, No 6 (2015) |
Soil cultivation work spent by unit |
|
Blednykh V.V., Svechnikov P.G.
|
Vol 78, No 1 (2011) |
Solution of the equation of gas flow in the gap heat belt of piston - cylinder of high-speed tractor diesels |
|
Loschakov P.A.
|
Vol 84, No 7 (2017) |
Solution of the Kolmogorov system of equations for the generalized graph of states of a mobile feed hopper |
 (Rus)
|
Kupreenko A.I., Isaev K.M., Mikhaylichenko S.M.
|
Vol 78, No 9 (2011) |
Solving the equation of energy when modeling the convective heat exchange for high-speed transport diesels |
|
Loschakov P.A.
|
Vol 77, No 10 (2010) |
Some backgrounds of projection of machine units for the operation on slopes |
|
Sedashkin A.N., Tyapkin A.N., Lionkin A.M.
|
Vol 80, No 8 (2013) |
Some features of reduction rates determination of geared part of agricultural tractor transmission with hydrodynamic gear |
|
Dyachkov Y.A., Fedyanov Y.A.
|
Vol 76, No 2 (2009) |
Some peculiarities of speed rows of foreign agriculturaltractors, equipped by transmissions with power shift |
|
Lysov A.M.
|
Vol 85, No 5 (2018) |
Some results of experimental modeling cylinder and piston group oil supplay conditions of the low-sized four-cycle diesel engine |
 (Rus)
|
Putintsev S.V., Biktashev A.F., Pilatskaya S.S.
|
Vol 77, No 5 (2010) |
Some results of observing the work of thrashing and separating devices |
|
Doronin Y.F.
|
Vol 76, No 9 (2009) |
Some statistic indices of functioning of sowing unit with elastic-damping mechanism in tractor transmission |
|
Kravchenko V.A., Senkevich A.A., Senkevich S.E.
|
Vol 80, No 3 (2013) |
Sources of production and professional risks in technical service |
|
Chernoivanov V.I., Burenko L.A., Filippova Y.M., Ivleva I.B., Kazakova V.A., Dankov A.A.
|
Vol 77, No 7 (2010) |
Sowers for the resource-saving antidroughty technology |
|
Chekmariov P.A., Mazitov N.K., Sakhapov R.L., Konovalov V.N., Rakhimov I.R., Sharafiyev L.Z., Bagmanov R.S.
|
Vol 85, No 4 (2018) |
Sowing vertical-disc apparatus for seeding small-seed crops |
 (Rus)
|
Kem A.A., Miklashevich V.L.
|
Vol 76, No 7 (2009) |
Soyuzagromash and VDMA Landtechnik widen cooperation in the AGROSALON exhibition |
|
- -.
|
Vol 84, No 1 (2017) |
SPECIAL CHARACTERISTICS OF GLEANER COMBINE HARVESTERS |
 (Rus)
|
GOL'TYAPIN V.Y.
|
Vol 81, No 9 (2014) |
Special device for application of encrusting solution on corn seeds |
|
Kushnir V.G., Kim N.P., Shilo I.N., Romanyuk N.N., Astrakhan B.M., Ageychik V.A., Shmat T.N.
|
Vol 79, No 5 (2012) |
Special equipment for potato production in small farms |
|
Kolchin N.N., Byshov N.V., Borychev S.N., Uspenskiy I.A., Rembalovich G.K.
|
Vol 84, No 4 (2017) |
SPECIALIZED MEASURMENT SYSTEM FOR EXPERIMENTAL RESEARCH OF SUSPENSION SYSTEM LOADING CONDITIONS OF A HIGH MOBILITY TRACKED VEHICLES |
 (Rus)
|
Dubin D.A., Nakaznoi O.A., Chizhov D.A., Shmakov A.Y.
|
Vol 83, No 5 (2016) |
Specific speed and overall dimensions in calculation and selection of transverse fans |
 (Rus)
|
Sychugov N.P.
|
Vol 87, No 4 (2020) |
Specifics of certification of agricultural tires with maximum consideration of their operating conditions |
 (Rus)
|
Goncharenko S.V., Godzhaev Z.A., Pryadkin V.I., Artyomov A.V., Godzhaev T.Z.
|
Vol 81, No 4 (2014) |
Specified calculation of multi-disc adaptive friction clutches |
|
Shishkarev M.P., Vu T.D.
|
Vol 77, No 1 (2010) |
Spectral characteristics of dynamic model of curvilinear movement of tractor train |
|
Gamajunov P.P., Alekseev S.A., Lukjanov A.A., Gamajunova Y.P.
|
Vol 83, No 7 (2016) |
Speed energy-saving cultivator |
 (Rus)
|
Rudenko N.E., Kayvanov S.D., Zavyalik F.N.
|
Vol 81, No 3 (2014) |
Speeds of agricultural tractors |
|
Gorodetskiy K.I., Sharipov V.M., Alendeyev Y.M., Shevelev A.S., Muratova S.K.
|
Vol 82, No 5 (2015) |
Spraying device for berry fields |
|
Ozherelyev V.N.
|
Vol 77, No 10 (2010) |
Spring constant of the final drive of tractor equipped with the built-in pneumohydraulic damper |
|
Zhutov A.G., Avramov V.I., Lyapkosova I.A.
|
Vol 76, No 6 (2009) |
Sredstva dlya tekhnologicheskogo kontrolya i nastroyki MTA na kachestvo i effektivnost' raboty |
|
Garanin G.V.
|
Vol 80, No 9 (2013) |
Stability of a wheeled vehicle on turn and on impact with immobile block |
|
Gorshkov Y.G., Starunova I.N., Kalugin A.A.
|
Vol 81, No 12 (2014) |
Stability of automobile and low-clearance wheeled tractor |
|
Mamiti G.I., Pliyev S.K., Tedeyev V.B.
|
Vol 76, No 12 (2009) |
Stability of movement of combined MTA (machine-and-tractor unit) with frontal and rear mounted implements |
|
Dontsov I.Y.
|
Vol 78, No 8 (2011) |
Stability of wheel tractor on the turn |
|
Mamiti G.I., Lyanov M.S., Pliyev S.K., Salbiyeva Z.S.
|
Vol 78, No 12 (2011) |
Stability of wheel tractor with rocking front axle when driving on a level road |
|
Mamiti G.I., Pliyev S.K.
|
Vol 76, No 3 (2009) |
Stability of work of electron controlledfuel delivering system |
|
Bashirov R.M., Galiullin R.R.
|
Vol 79, No 10 (2012) |
Stabilization of diesel fuel supply |
|
Inshakov A.P., Kryuchkov S.V., Soloviov R.O.
|
Vol 82, No 10 (2015) |
Stabilization of road-holding ability of controlled movement of machine-tractor unit |
|
Fomin S.D., Pyndak V.I., Gapich D.S.
|
Vol 87, No 1 (2020) |
Stabilization of the load mode of the internal combustion engine of the tractor through the use of a hybrid power plant |
 (Rus)
|
Rakov V.A., Litvinov V.I.
|
Vol 78, No 6 (2011) |
Standardization of tractors' reliability |
|
Stopalov S.G., Zaytsev S.D., Streblechenko L.S.
|
Vol 77, No 12 (2010) |
Start of the Internet portal "ROSAGROMASH-STAT" |
|
- -.
|
Vol 90, No 4 (2023) |
State and development prospects of the agricultural tractor fleet in the context of digital transformation of agriculture |
 (Rus)
|
Starostin I.A., Lavrov A.V., Eshchin A.V., Davydova S.A.
|
Vol 79, No 1 (2012) |
State and prospects of tractor industry development for the agroindustrial complex of Russia |
|
Gorbachiov I.V., Nefiodov A.M.
|
Vol 79, No 11 (2012) |
State and trends of development of the tractor industry for Russian forest complex |
|
Bartenev I.M., Drapalyuk M.V.
|
Vol 76, No 8 (2009) |
State of agricultural machinery industry in Russia and measures for development of the branch |
|
Babkin K.A.
|
Vol 81, No 2 (2014) |
State of machine and tractor fleet in the Republic of Armenia and its development prospects |
|
Chibukhchyan S.S.
|
Vol 80, No 4 (2013) |
State of standard base of tractor transport and transport-technological machines |
|
Perchatkin Y.V.
|
Vol 91, No 3 (2024) |
Static and dynamic influence of forces on a being threshed corncob |
 (Rus)
|
Poghosyan V.M., Poluektov A.A.
|
Vol 82, No 1 (2015) |
Static stability of articulated front loader |
|
Pozin B.M., Troyanovskaya I.P., Taborskikh Y.V.
|
Vol 82, No 11 (2015) |
Static stability of articulated front loader on the slope |
|
Pozin B.M., Troyanovskaya I.P., Bondar V.N., Vershinskiy L.V., Taborskikh Y.V.
|
Vol 76, No 11 (2009) |
Statistical characteristics of effectiveness indices of ploughing units in the conditions of North-West zone of Russian Federation |
|
Kobko A.A.
|
Vol 76, No 11 (2009) |
Steering control with adjustable kinematics of steering wheels turning |
|
Dubovik D.A., Amelchenko P.A.
|
Vol 82, No 9 (2015) |
Steering system of universal all-wheel steer tractor |
|
Kozlov D.G., Durmanov A.S.
|
Vol 83, No 8 (2016) |
Strategy for design improvement of a combine harvester |
 (Rus)
|
Ozherel'ev V.N., Nikitin V.V.
|
Vol 80, No 11 (2013) |
Strength and staff of technical support service in animal husbandry |
|
Kovaliov L.I., Kovaliov I.L.
|
Vol 76, No 7 (2009) |
Strength parameters of locking mechanism of the simple gear differential |
|
Gorshkov Y.G., Dmitriev M.S., Zhitenko I.S.
|
Vol 77, No 7 (2010) |
Strengthening of tube component billets for the manufacture of hollow pins for caterpillar machines' tracks |
|
Zasypkin A.D.
|
Vol 76, No 2 (2009) |
Strengthening shafts by means of surface plasticforming in the variable magnet field |
|
Taranov A.S.
|
Vol 77, No 7 (2010) |
Stress loading of lifting-and-shifting machines in the conditions of technological operations performing |
|
Gryazin V.A.
|
Vol 83, No 2 (2016) |
String module cultivator for surface tillage |
 (Rus)
|
Rudenko N.Y., Kayvanov S.D., Kalugin D.S., Zavyalik F.N.
|
Vol 81, No 8 (2014) |
Strip oversowing in surface improvement technology of old-growth perennial grasses using the ОПП-6 tool |
|
Derepaskin A.I., Polischuk Y.V., Binyukov Y.V.
|
Vol 77, No 10 (2010) |
Structural and technological parameters of scalping machine |
|
Saitov V.Y., Farafonov V.G.
|
Vol 80, No 3 (2013) |
Structural features of Polish tractors |
|
Goltyapin V.Y.
|
Vol 86, No 3 (2019) |
Structural ways to reduce the damage of planting potatoes bulbs when using a chain-spoon planting machine |
 (Rus)
|
Kazakov S.S., ZHivaev O.V., Nikulin A.V.
|
Vol 83, No 8 (2016) |
Study and calculation of soil compaction during operation and after stopping of a wheeled tractor |
 (Rus)
|
Zolotarevskaya D.I.
|
Vol 87, No 1 (2020) |
Study of a device for implementing diesel engine fuel supply skipping |
 (Rus)
|
Harisov D.D., Gajsin E.M.
|
Vol 83, No 1 (2016) |
Study of influence of layer-by-layer blowdown on the efficiency and environmental friendliness of two-stroke engine |
 (Rus)
|
Karasev V.A., Sokolov I.L., Kuklin V.N., Khapskiy A.V., Kulikov R.A.
|
Vol 88, No 5 (2021) |
Study of load level of bearing-outlet units of turbocharger with impellers from composite materials |
 (Rus)
|
Fomin V.M., Kaminsky V.N., Kaminsky R.V., Netrusov A.N.
|
Vol 91, No 1 (2024) |
Study of methods of energy efficiency improvement considering operation modes of traction electric drive with use of the methods of virtual mathematical modelling |
 (Rus)
 (Eng)
|
Klimov A.V.
|
Vol 83, No 5 (2016) |
Study of nitrogen oxides content in the cylinder of turbocharged tractor diesel engine operating on natural gas |
 (Rus)
|
Likhanov V.A., Lopatin O.P.
|
Vol 82, No 11 (2015) |
Study of possibility for forcing of diesel engines produced by Vladimir motor-tractor plant |
|
Gavrilov A.A., Gots A.N.
|
Vol 83, No 6 (2016) |
Study of pulse drying of grain in the S-30 dryer |
 (Rus)
|
Golubkovich A.V., Pavlov S.A., Lukin I.D.
|
Vol 82, No 10 (2015) |
Study of stationary regimes of drum grain dryer and opportunities to increase their intensity |
|
Andrianov N.M., Mei S., Xue Y.
|
Vol 83, No 7 (2016) |
Study of technology of liquid organic fertilizers application by a transport-technological unit for agricultural purposes |
 (Rus)
|
Shkel' A.S., Kozlovskaya M.A., Dzotsenidze T.D.
|
Vol 88, No 4 (2021) |
Study of the continuous mode of mixing feed components in a mixing plant |
 (Rus)
|
Solonshchikov P.N.
|
Vol 87, No 6 (2020) |
Study of the diesel engine working process during its operation with a fuel injection pressure of 300 MPa |
 (Rus)
|
Quynh N.T., Dunin A.Y.
|
Vol 91, No 3 (2024) |
Study of the ecological indicators of diesel engine operation with biomineral fuel mixtures |
 (Rus)
|
Plotnikov S.A., Kartashevich A.N., Zabolotskikh G.E.
|
1801 - 1950 of 2371 Items |
<< < 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 > >> |