| Edição |
Título |
Arquivo |
| Volume 10, Nº 4 (2024): 30.12.2024 |
Vibration Suppression of Concrete Pump Boom During Pumping by Feedforward Control Method |
(Eng)
|
|
Bao H., Li S.
|
| Volume 11, Nº 1 (2025): 30.04.2025 |
Automation of a test bench for studying the magnetic hysteresis of a damper based on multilayer magnetorheological elastomer |
(Rus)
|
|
Tabakaev V., Bazinenkov A., Kostin L.
|
| Volume 10, Nº 4 (2024): 30.12.2024 |
Analysis of the possibilities of organizing life tests of a conical bearing under external high-frequency force loading |
(Rus)
|
|
Rekadze P., Popov M., Pokazeev V., Rodionov L.
|
| Volume 11, Nº 1 (2025): 30.04.2025 |
Analysis of vibration signals of micro-size aircraft engines based on joint time-frequency method |
(Rus)
|
|
Xin M., Qin H., Ye Z., Wang L.
|
| Volume 10, Nº 3 (2024): 20.11.2024 |
Asymptotic analysis of monotonic stability of the amplitude of pendulum oscillations with small nonlinear damping |
(Rus)
|
|
Lyubimov V.
|
| Volume 10, Nº 1 (2024): 6.05.2024 |
Vibroacoustic modeling of a compressor piping system |
(Rus)
|
|
Mironova T., Rekadze P., Prokof'ev A.
|
| Volume 10, Nº 2 (2024): 7.10.2024 |
Influence of geometric factors on cyclic durability of rotor main parts of the hot section of aircraft engines.
Validation using lumen control results |
(Rus)
|
|
Selishchev P., Zelenkevich A.
|
| Volume 9, Nº 3 (2023) |
INFLUENCE OF NOTCH DEPTH ON MULTI-CYCLE FATIGUE OF SPECIMENS UNDER OUTSTRIPPING SURFACE PLASTIC DEFORMATION |
(Rus)
|
|
Pavlov V., Vakulyuk V., Sazanov V., Semenova O., Matveeva K.
|
| Volume 9, Nº 2 (2023) |
EFFECTS OF WEAR AND FLANK CLEARANCE ON VIBRATION BEHAVIOR OF GAS TURBINE ENGINE GEARBOX |
(Rus)
|
|
Sundukov A., Shahmatov E.
|
| Volume 10, Nº 1 (2024): 6.05.2024 |
Influence of worn on flow characteristics of aircraft engine labyrinth seals |
(Rus)
|
|
Matveev A., Tisarev A., Falaleev S., Mironova K.
|
| Volume 11, Nº 1 (2025): 30.04.2025 |
Effect of different surface plastic deformation methods on high-cycle fatigue of notched specimens |
(Rus)
|
|
Pavlov V., Sazanov V., Vakulyuk V., Semenova O., Koval' I.
|
| Volume 11, Nº 1 (2025): 30.04.2025 |
Influence of forces of elastic pseudo-slippage of wheel pairs
on the occurrence of shock pulses in the train |
(Rus)
|
|
Morozov D., Ermolenko I., Pykhalov A.
|
| Volume 11, Nº 2 (2025): :27.06.2025 |
Selection of the geometric shape of the flow path of a remotely controlled valve to minimize its acoustic radiated power of turbulent noise and hydraulic resistance |
(Rus)
|
|
Ponomarev S., Kryuchkov A., Rodionov L., Stadnik D., Ermilov M., Ponomareva S.
|
| Volume 11, Nº 1 (2025): 30.04.2025 |
Selection of the material grade and hardness of the working surface of the teeth of dynamically loaded gears |
(Rus)
|
|
Barmanov I.
|
| Volume 9, Nº 4 (2023): 30.12.2023 |
GAS DYNAMIC FACE SAEL TIGTNESS UNDER NON-STATIONARY LOADING |
(Rus)
|
|
Vinogradov A., Sharonov A., Zagadov I., Komisar Y.
|
| Volume 10, Nº 1 (2024): 6.05.2024 |
Sound-absorbing structures to reduce cabin and community noise of aircraft (Review) |
(Rus)
|
|
Moshkov P., Ostroumov M., Davydov D.
|
| Volume 10, Nº 3 (2024): 20.11.2024 |
Application of a high-speed balancing facility digital model to prepare and conduct trials for aircraft engine rotors |
(Rus)
|
|
Shaposhnikov K., Degtyarev S., Ryzhenkov V., Leontiev M.
|
| Volume 10, Nº 1 (2024): 6.05.2024 |
Study of a damper based on a multilayer magnetorheological elastomer |
(Rus)
|
|
Tabakaev V., Bazinenkov A., Tuzhba G., Shagimuratova A.
|
| Volume 9, Nº 4 (2023): 30.12.2023 |
STUDY OF THE NORMAL SPEED OF FLAME PROPAGATION OF A METHANE-AIR MIXTURE ENRICHED WITH HYDROGEN AND DILUTED WITH WATER VAPOR |
(Rus)
|
|
Idrisov D., Matveev S., Matveev S., Gurakov N., Popov A., Litarova A.
|
| Volume 10, Nº 1 (2024): 6.05.2024 |
Research of strength parameters and dynamic characteristics of rotor parts of a promising small sized GTE |
(Rus)
|
|
Evdokimov D., Filinov E., Skuratov D., Ostapyuk Y.
|
| Volume 9, Nº 4 (2023): 30.12.2023 |
RESEARCH OF THE FLOW CHARACTERISTICS OF A HYDRAULIC DRIVE BASED ON A HYDROSTATIC SUPPORT WITH MAGNETORHEOLOGICAL CONTROL |
(Rus)
|
|
Shelkovyy M., Bazinenkov A.
|
| Volume 10, Nº 2 (2024): 7.10.2024 |
Study of the properties and joint operation of resonant sound absorbers depending on their geometry and relative position |
(Rus)
|
|
Kostylev K., Salin M., Kosteev D., Usacheva I., Gorshonkov A., Egoshin O.
|
| Volume 10, Nº 1 (2024): 6.05.2024 |
Research of the accuracy and efficiency of typical structures using wave shell finite element models |
(Rus)
|
|
Shchemelev V., Matveev P.
|
| Volume 11, Nº 2 (2025): :27.06.2025 |
Combination diagnostic features of technical condition of planetary gearboxes for gas-turbine engines |
(Rus)
|
|
Sundukov A., Igolkin A.
|
| Volume 10, Nº 3 (2024): 20.11.2024 |
Complex analysis of the vessel's shaft |
(Rus)
|
|
Fishchenko A., Grinek A., Boychuk I.
|
| Volume 11, Nº 2 (2025): :27.06.2025 |
Method for determining the confidence limits of errors in measured parameters of an inhomogeneous flow
at the inlet of an aircraft gas turbine engine compressor |
(Rus)
|
|
Matveev V., Pestov D., Gataullina E., Mel'nikov S.
|
| Volume 11, Nº 2 (2025): :27.06.2025 |
Methodology for assessing the vibration activity of an aggregated hydraulic device under test bench conditions |
(Rus)
|
|
Frantov A., Gladilin Y., Pyalov N.
|
| Volume 11, Nº 1 (2025): 30.04.2025 |
Modeling of an automated system for correction of the tool center point displacement of an industrial robotic manipulator during the execution of technological operations along a complex curved contour |
(Rus)
|
|
Sazonnikova N., Ilyukhin V., Ermakov E., Mezentsev D.
|
| Volume 9, Nº 3 (2023) |
MANUFACTURING PROCESS SIMULATION OF A BUMP FOIL FOR A GAS FOIL BEARING |
(Rus)
|
|
Badykov R., Yurtaev A., Grigorev E., Lomachev A.
|
| Volume 10, Nº 2 (2024): 7.10.2024 |
Model of evaluation of interference between blades shrouds during assembly of turbine impellers |
(Rus)
|
|
Yanyukina M., Bolotov M., Kudashov E.
|
| Volume 10, Nº 2 (2024): 7.10.2024 |
On the applicability limits of the structurally orthotropic shell model in problems of calculating the buckling under axial compression of waffle cylindrical shells |
(Rus)
|
|
Anisimov S., Pavlov V., Sazanov V.
|
| Volume 9, Nº 4 (2023): 30.12.2023 |
ON THE ERRORS IN MEASUREMENT OF RESIDUAL STRESSES AND PREDICTION OF THE ENDURANCE LIMIT OF HARDENED PARTS |
(Rus)
|
|
Sazanov V., Pavlov V., Matveeva K., Konyhova A.
|
| Volume 9, Nº 4 (2023): 30.12.2023 |
ABOUT THE APPLICATION OF MR MATERIAL FOR NOISE REDUCTION OF MECHANICAL ENGINEERING PRODUCTS |
(Rus)
|
|
Igolkin A., Safin A.
|
| Volume 10, Nº 2 (2024): 7.10.2024 |
On the development of the first russian-chinese standard in the field of aircraft manufacturing GOST R 70066-2022 «Aircraft equipment. Requirements for aircraft acoustic design of passenger salon and crew cockpit» |
(Rus)
|
|
Moshkov P.
|
| Volume 9, Nº 3 (2023) |
ON AUTOMATION OF DESIGN OF OIL SYSTEM OF AN AIRCRAFT GTE |
(Rus)
|
|
Grishanov O.
|
| Volume 9, Nº 3 (2023) |
FREQUENCY TEST BENCH AND ITS APPLICATION FOR EQUIPMENT TESTING FOR RESEARCH OF PULSATION PROCESSES IN GTEs |
(Rus)
|
|
Bystrov N., Safin A., Radin D., Matveev S.
|
| Volume 11, Nº 1 (2025): 30.04.2025 |
Determination flank clearance of gears of a planetary gearbox as a vibration source in a gas turbine engine using a standard tachometer signal |
(Rus)
|
|
Sundukov A., Shakhmatov E.
|
| Volume 10, Nº 4 (2024): 30.12.2024 |
Determination of hydrodynamic and vibroacoustic characteristics of a shut-off valve by hybrid engineering method |
(Rus)
|
|
Chistyakova T., Kulichkova E.
|
| Volume 11, Nº 1 (2025): 30.04.2025 |
Determination of additional stresses in the crankshaft of a reciprocating compressor caused by forced torsional vibrations at resonance point |
(Rus)
|
|
Kapustin P.
|
| Volume 9, Nº 2 (2023) |
DETERMINATION OF THE CAPACITY OF THE EXHAUST NOISE MUFFLER OF PNEUMATIC SYSTEMS BY COMPUTATIONAL AND EXPERIMENTAL METHODS |
(Rus)
|
|
Igolkin A., Safin A., Stadnik D., Balyaba M.
|
| Volume 10, Nº 3 (2024): 20.11.2024 |
Determination of the elastic-damping characteristics of the vent-relief valve |
(Rus)
|
|
Prokof'ev A., Makar'yants G., Stadnik D., Balyaba M., Kosov G.
|
| Volume 10, Nº 3 (2024): 20.11.2024 |
Optimization of probabilistic operational characteristics
of a neural network algorithm for predictive diagnostics
of industrial equipment failures through automated processing of a training sample |
(Rus)
|
|
Nekrasov I., Konstantinovskiy Y., Kukin N.
|
| Volume 10, Nº 4 (2024): 30.12.2024 |
Optimization of the cycle of a small-sized gas turbine plant using the СAE-system «ASTRA» |
(Rus)
|
|
Tkachenko A., Filinov E., Tremkina O.
|
| Volume 10, Nº 3 (2024): 20.11.2024 |
Optoelectronic discrete-phase converter for automated control systems of geometric parameters of the surface
of gas turbine engine blades |
(Rus)
|
|
Prokofev A., Danilin S., Chernyavskiy A., Danilin A.
|
| Volume 9, Nº 2 (2023) |
FEATURES OF OIL CONSUMPTION MEASUREMENT DURING BENCH TESTS OF INDUSTRIAL GAS TURBINE |
(Rus)
|
|
Grishanov O.
|
| Volume 10, Nº 2 (2024): 7.10.2024 |
Developing the use of domestic photoelastic coating materials
to determine the deformation of parts of complex geometric shapes |
(Rus)
|
|
Lezhin D., Nagurny I., Sidorov V., Shchemelev V.
|
| Volume 9, Nº 3 (2023) |
ASSESSMENT OF PERFORMANCE CHARACTERISTICS OF HEAT EXCHANGERS TAKEN INTO ACCOUNT OF NTU INDICATOR |
(Rus)
|
|
Tremkina O., Uglanov D., Shihalev V.
|
| Volume 11, Nº 2 (2025): :27.06.2025 |
Assessment of incidence angles of acoustic pressure waves on the surface of the stringer structure of the dry compartment during rocket launch |
(Rus)
|
|
Popov P.
|
| Volume 9, Nº 4 (2023): 30.12.2023 |
IN MEMORY OF ACADEMICIAN VLADIMIR PAVLOVICH SHORIN |
(Rus)
|
|
Bystrov N.
|
| Volume 10, Nº 3 (2024): 20.11.2024 |
Improving the quality of testing of hydralic equipment on a specialized measuring stand |
(Rus)
|
|
Gladilin Y., Frantov A., Vidyaskina A., Berestovitsky E.
|
| Volume 9, Nº 2 (2023) |
EFFICIENCY IMPROVEMENT OF MAGNETORHEOLOGICAL VALVE THROUGH GEOMETRIC PARAMETER VARIATION OF TECHNOLOGICAL GAP |
(Rus)
|
|
Shelkovyy M., Bazinenkov A., Shagimuratova A.
|
| Volume 10, Nº 3 (2024): 20.11.2024 |
Application of the equivalent source method for numerical simulation of hydrodynamic noise of elastic bodies |
(Rus)
|
|
Balakireva N., Zaytseva S.
|
| Volume 9, Nº 1 (2023) |
APPLICATION OF THE RESONANCE METHOD AND THE SPECKLE INTERFEROMETRY METHOD FOR MEASURING THE DYNAMIC CHARACTERISTICS OF CONSTRUCTIONS |
(Rus)
|
|
Osipov M., Sergeev R., Limov M.
|
| Volume 9, Nº 1 (2023) |
SPECKLE INTERFEROMETRY APPLICATION FOR INVESTIGATING THE EFFECT OF PARAMETER MISTUNING OF TURBOMACHINE ROTOR WHEELS ON THEIR NATURAL VIBRATIONS |
(Rus)
|
|
Zhuzhukin A., Nepein K.
|
| Volume 9, Nº 4 (2023): 30.12.2023 |
FORECASTING THE ESTIMATED LIFE OF GTE PARTS BASED ON THE IMPACT OF ANALYTICAL AND OPERATIONAL FACTORS |
(Rus)
|
|
Pakhomenkov A., Bukatyy S.
|
| Volume 10, Nº 2 (2024): 7.10.2024 |
Leg prosthesises with active damping |
(Rus)
|
|
Ilyukhin V., Ermilov M., Safin A., Vidyaskina A.
|
| Volume 9, Nº 1 (2023) |
DEVELOPMENT OF VIBRATION DAMPERS OF THE POWER FLUID TO REDUCE HYDRODYNAMIC NOISE IN PIPELINE SYSTEMS |
(Rus)
|
|
Kryuchkov A., Ermilov M., Balyaba M., Ermilova E., Vidyaskina A.
|
| Volume 9, Nº 3 (2023) |
DEVELOPMENT OF A CASCADE ALGORITHM FOR MONITORING THE MOVEMENT OF PARTS DURING THEIR MANUFACTURE |
(Rus)
|
|
Kiseleva P., Pechenina E., Pechenin V.
|
| Volume 10, Nº 4 (2024): 30.12.2024 |
Development of a finite element resonator model for a tuning fork-type vibration level detector |
(Rus)
|
|
Brazhnikov A., Ganigin S.
|
| Volume 9, Nº 1 (2023) |
DESIGN DEVELOPMENT OF A HIGH-PRESSURE PNEUMATIC NOISE MUFFLER AND INVESTIGATION OF ITS EFFECTIVENESS |
(Rus)
|
|
Zaika A., Igolkin A., Reshetov V., Safin A., Safina I.
|
| Volume 10, Nº 2 (2024): 7.10.2024 |
Development of linear bearing equipment for modal testing
of low-frequency weakly damped spacecraft structures |
(Rus)
|
|
Maksimov V., Marinin D., Maksimov P., Nazar'ko A.
|
| Volume 11, Nº 2 (2025): :27.06.2025 |
Development of a mathematical model for optimizing the milling process to increase the fatigue limit of products and minimize the stress of the cutting process |
(Rus)
|
|
Evdokimov D., Pavlov V., Shtyrlov A.
|
| Volume 10, Nº 4 (2024): 30.12.2024 |
Development of recommendations for forming numerical models of the working process of axial compressors to calculate, using them, the operational boundaries of a pneumatic brake |
(Rus)
|
|
Prokof'ev A., Novikova Y., Matveev V.
|
| Volume 10, Nº 3 (2024): 20.11.2024 |
Development of a data exchange service between software systems |
(Rus)
|
|
Tandalov K., Pechenin V.
|
| Volume 10, Nº 1 (2024): 6.05.2024 |
Development of an equivalent model of a damping elastic ring considering elastic contact on bulges |
(Rus)
|
|
Cheng L., Novikov D., Diligenskiy D.
|
| Volume 10, Nº 4 (2024): 30.12.2024 |
Calculation of dynamic characteristics of turbomachinery mechanical seals |
(Rus)
|
|
Falaleev S., Badykov R., Benedyuk M.
|
| Volume 11, Nº 2 (2025): :27.06.2025 |
Calculated detuning from flutter and experimental validation of the energy method of its prediction in the blades of the GTE compressor |
(Rus)
|
|
Makarov P., Chepiga S., Voronin O., Kolotnikov M., Vedeneev V., Abdukhakimov F.
|
| Volume 10, Nº 3 (2024): 20.11.2024 |
Self-excitation of non-synchronous rotation of closely spaced unbalanced rotors |
(Rus)
|
|
Samokhvalov V.
|
| Volume 10, Nº 4 (2024): 30.12.2024 |
Reduction of pressure fluctuations in the discharge lines of screw compressors |
(Rus)
|
|
Vidyaskina A., Belov G., Kryuchkov A., Taziev K.
|
| Volume 9, Nº 1 (2023) |
MODERN PROBLEMS OF AEROACOUSTICS OF PROPELLER-DRIVEN FIXED-WING AIRCRAFTS |
(Rus)
|
|
Pogosyan M., Moshkov P.
|
| Volume 11, Nº 2 (2025): :27.06.2025 |
Speckle interferometer setup for continuous recording of GTE structure vibration states |
(Rus)
|
|
Zhuzhukin A., Nepein K., Sharafutdinova O.
|
| Volume 11, Nº 1 (2025): 30.04.2025 |
Increasing the longevity of rotary bearings in gas turbine engines with air-fuel lubrication systems |
(Rus)
|
|
Klimov V., Falaleev S.
|
| Volume 10, Nº 4 (2024): 30.12.2024 |
Attitude motion of a nanosatellite with a movable module on a rail platform during gravity-gradient stabilization process |
(Rus)
|
|
Doroshin A., Eremenko A.
|
| Volume 11, Nº 2 (2025): :27.06.2025 |
Dynamic loading conditions of radial bearings of rocket steering units of liquid rocket engine steering units |
(Rus)
|
|
Dolgih D.
|
| Volume 10, Nº 4 (2024): 30.12.2024 |
Digital technologies in pneumohydraulic drives of technological equipment: problems and prospects |
(Rus)
|
|
Krivosheev N., Zharkovsky A.
|
| Volume 10, Nº 3 (2024): 20.11.2024 |
Teeth matching frequency in vibration diagnostics of technical condition of aviation gas turbine engine gearboxes |
(Rus)
|
|
Sundukov A., Shahmatov E.
|
| Volume 9, Nº 2 (2023) |
NUMERICAL SIMULATION OF THE DYNAMIC BEHAVIOR OF A STRUCTURALLY SIMILAR SAMPLE FROM POLYMER COMPOSITE MATERIAL |
(Rus)
|
|
Mal'kova S., Toropitsina A., Utkin A.
|
| Volume 11, Nº 1 (2025): 30.04.2025 |
Energy mathematical model of an aircraft power transfer unit |
(Rus)
|
|
Konstantinov S., Kuderko D., Polyakov N., Tselishchev V.
|
| 1 - 78 de 78 resultados |
|
