检索

The methods of regression and the resulting invariants based on them

Ivashnev L.

(Rus)

Methods of linear multiple regression in a matrix form

Ivashnev L.

(Rus)

卷 8, 编号 4-4 (2014)

Calculation of operators, which solve problems of heat conduction in straight cylinders using semigroup symmetry

Ivanov D.

(Rus)

卷 19, 编号 2 (2025)

Analysis of mathematical models of few-leaf springs of vehicle suspension systems

Tikhonova A., Rubanov P., Chichekin I.

(Rus)

卷 18, 编号 4 (2024)

Validation of the mathematical model of the front drive axle suspension according to frequency response

Kulagin V., Rakhmatov R., Likeev A.

(Rus)

卷 16, 编号 1 (2022)

Validation of the CAE model set for a passenger car suspension according to loading criteria

Kulagin V.

(Rus)

Supplementary stress method convergence rate acceleration

Lazarev A.

(Rus)

The quality of products improving for flanging of circular holes in sheet metal blanks and profiles

Kaljuzhnyj V.

(Rus)

卷 8, 编号 2-4 (2014)

Comparative analysis of standardized and finite-element approaches to strength calculations on example of assembly table

Netrusov A.

(Rus)

卷 6, 编号 2-2 (2012)

Generalized method of supplementary strain in the problems of beam torsion

Temis Y., Lazarev A., Malanova O.

(Rus)

卷 7, 编号 2-1 (2013)

Analysis of the methods of calculation and simulation of DC motors with permanent magnet excitation

Rozin P., Akimov A., Kudinova L.

(Rus)

Cold extrusion with differentiated counter-pressure of die cavities

Kaljuzhnyj V., Pimanov V.

(Rus)

卷 4, 编号 1-4 (2014)

Scaling when using weighted regression method

Ivashnev L., Gorbacheva S.

(Rus)

MODEL OF ELASTOPLASTIC BEHAVIOR OF STRUCTURE MATERIALS AT THERMOCYCLIC LOADING

Temis Y., Azmetov K., Fakeev A.

(Rus)

卷 14, 编号 3 (2020)

Entropy-statistical analysis of the air conditioning cycle of an aircraft

Merkulov V., Tishchenko I., Abalakin S.

(Rus)

卷 16, 编号 2 (2022)

Improving the energy and environmental performance of a diesel internal combustion engine by using a hydrogen-containing additive

Dunin A., Shabanov A., Nguyen T., Shatrov M., Golubkov L.

(Rus)

DETERMINATION OF FRICTION COEFFICIENT BY COMPRESSION OF RING SAMPLE DURING HOT DEFORMATION

Petrov A.

(Rus)

卷 5, 编号 1 (2011)

Investigation of the kinetic mechanism of nitrogen oxidation in an automotive engine with stratified mixing

Fomin V., Platunov А.

(Rus)

卷 4, 编号 1 (2010)

Dimensional Nonlinear Finite Element Model of the Front-Drive Car with Exhaust System

Cherepanov L., Okunev A., Rogozhkin V.

(Rus)

System of decision making support based on the fuzzy algorithm for selection of a supplier in the supply chain

Butusov O., Dubin M., Meshalkin V., Nikoforova O.

(Rus)

卷 7, 编号 2-1 (2013)

Determination of the influence of formative factors on design of conceptual objects in transport design and algorithm of through design

Lepeshkin I., Matersheva E.

(Rus)

Theoretical research of upsetting process for parts with a rectangular head

Kalpin J., Filippov J., Glazunov D.

(Rus)

卷 8, 编号 1-2 (2014)

Determination of the minimum curvature radius of a die for isothermal direct axisymmetric extrusion of aluminum alloy AD35

Voronkov V.

(Rus)

卷 8, 编号 1-3 (2014)

Features of metrological support for photocolorimetric gas analyzers

Sviryukova O.

(Rus)

卷 4, 编号 1-4 (2014)

Comparative analysis of methods for calculating airlift units

Alekseyev D., Sheypak A.

(Rus)

卷 9, 编号 3-1 (2015)

Methods of calculating suspension guide elements loads of vehicle when obstacle crossing

Goncharov R., Ryabov D.

(Rus)

Application of the method of wave dynamic compliances to multi-disk rotors calculation

Shorr B., Bortnikov A.

(Rus)

卷 11, 编号 3 (2017)

Design of an independent vehicle suspension guide using the topological optimization method

Vdovin D., Prokopov V., Ryabov D.

(Rus)

卷 16, 编号 1 (2022)

Forecasting the magnitude of the electrical load in electrical complexes of aircraft

Chernov A., Maleev R., Eroshkin D., Fedorenko E.

(Rus)

DEVELOPMENT OF STRUCTURES WITH USAGE OF INNOVATIVE WAYS TO DETERMINE DYNAMIC YOUNG'S MODULUS AND POISSON'S RATIO

Nyunin B., Grafkina M.

(Rus)

卷 3, 编号 1 (2009)

Clutch Load Determination on the Basis of Test Data

Kretov A., Esakov A.

卷 3, 编号 2 (2009)

Mathematical Simulation of Automotive Pollution Spreading by Control Volume Method

Gadelshin V., Lyubomischenko D., Sukhinov A.

卷 6, 编号 2-2 (2012)

Modern methods of hollow metal microsphere manufacture

Petrov M., Bast Y., Petrov P., Sheypak A.

(Rus)

Combined schemes of water treatment systems

Berengarten M., Gulyaeva E.

(Rus)

卷 7, 编号 1-1 (2013)

Mathematical problems of calculating the multi-zone models of a cycle of internal combustion engine with spark ignition

Apelinskiy D., Shenderovskiy I., Runovskiy K.

(Rus)

卷 7, 编号 1-5 (2013)

The stimulation of innovation through effective risk management

Sharyan E., Tkacheva O.

(Rus)

Compound names in automotive terminology in modern Russian

Zaytseva T., Martirosyan N.

(Rus)

卷 8, 编号 3-5 (2014)

Interdisciplinary approach to career guidance: perspectives of narrative method

Kazun A.

(Rus)

卷 9, 编号 3-1 (2015)

Calculation of linear type peristaltic pump efficiency

Grishin A., Sheipak A., Chicheryukin V.

(Rus)

Numerical methods in the study of seismic dynamics of complex systems of underground pipelines

Rashidov T., Bekmirzaev D.

(Rus)

卷 12, 编号 1 (2018)

Calculation investigation of the strength of the composite wheel rim

Bol'shikh A., Vdovin D., Eremin G.

(Rus)

卷 18, 编号 2 (2024)

Searching stochastic method of the submersible electric pump flow part optimal shape

Gorbatov D., Zharkovskii A., Adrianov A.

(Rus)

(Eng)

卷 15, 编号 4 (2021)

Development of a complex of mathematical models of a vehicle suspension for fatigue life analysis

Kulagin V.

(Rus)

QUALITY MANAGEMENT OF TECHNICAL PRODUCTS ON THE STAGES OF DEVELOPMENT

Martishkin V.

(Rus)

卷 2, 编号 2 (2008)

Optimization of individual selection for multiselection dimensional chains

Nepomiluyev V., Mayorova E.

(Rus)

Parametric Identification of Vehicle Longitudinal Motion

Katanaev N.

(Rus)

卷 6, 编号 2-1 (2012)

Kinetostatical analysis of a lifting mechanism

Gebel E., Zhursenbaev B., Sarbasov A.

(Rus)

Analysis of technological process of forging broaches with the simulation in DEFORM-3D

Taupek I., Alekseev P.

(Rus)

卷 7, 编号 1-2 (2013)

Directed selection of a configuration of flexible automated assembly line for assembling of gearbox shafts

Bukhteeva I., Abbyasov V., Elkhov P.

(Rus)

卷 7, 编号 1-4 (2013)

The automized strength analysis of apparatuses with jackets

Lugantsev L., Lobanov G.

(Rus)

Situationally-conditionedlearning as a means for exploring of linguistic-cultural code of foreign language society

Bagramyants N.

(Rus)

Simplex method for determining the response function extremum in the planning of the experiment

Beriashvili V., Oskin S.

(Rus)

Analysis of variants of Cholesky method for solution of big sparse systems of linear algebraic equations

Azmetov K.

(Rus)

Obtaining of non-linear regression equations with parabolic optimization

Ivashnev L.

(Rus)

卷 13, 编号 1 (2019)

Flow diagrams for tribological testing of transport engineering units

Glazunov D.

(Rus)

卷 17, 编号 4 (2023)

Assessment of influence of considering the flexibility of the front loader frame on the emerging loads in the multibody system

Rubanov P., Goncharov R., Skotnikov G., Gorelov V., Grigoriev V.

(Rus)

ASSURANCE OF THE QUALITY OF PROCESSING OF COMPLEX CONTOURED PARTS ON MACHINES WITH VARIABLE ELEMENTS

Maximov Y., Abramova A., Kuzminsky D., Mokrinskaya A.

(Rus)

卷 2, 编号 2 (2008)

Features of Cylindrical Pressure Coupling Assembly by Combined Heat-glue Method

Knyazev D.

(Rus)

Onboard Electrical Systems with Limited Power of Primary Source

Garmash Y.

(Rus)

卷 6, 编号 2-1 (2012)

Approximate method for calculating of internal combustion engine intake noise

Vakhitov Y., Zagayko S.

(Rus)

卷 7, 编号 4-1 (2013)

Business processes at the enterprises of automotive industry in Russia: evaluation of the effectiveness and governance issues

Alenina E., Paskhina A.

(Rus)

卷 7, 编号 1-2 (2013)

Stress-strain state of plastically deformable body in relation to the processes of warm direct extrusion and reduction into conical extrusion dies

Pyzhov V., Shlykova A.

(Rus)

卷 8, 编号 1-2 (2014)

Method of magnetic separation of fluids

Samokhin V., Sandulyak A., Sandulyak A.

(Rus)

Enhanced algorithm for gear calculation for justified selection of materials of gears and wheels

Lukyanov A., Starikov A.

(Rus)

卷 8, 编号 3-5 (2014)

Attitude to creativity in classical science

Kataeva O.

(Rus)

卷 14, 编号 4 (2020)

Optimization of the design and experimental study of the stress-strain state of the rear suspension balancer of an all-terrain vehicle

Shabolin M.

(Rus)

卷 17, 编号 4 (2023)

The method of virtual bench tests conducting to analyze the vehicle technical characteristics compatibility to detect and prevent the risk of resonant phenomena in the sprung cab

Maximov R.

(Rus)

卷 15, 编号 2 (2021)

The issue of improving the efficiency of nitrogen oxide neutralization systems in diesel internal combustion engines

Shabanov A., Kondratiev D., Vanin V., Dunin A.

(Rus)

卷 5, 编号 2 (2011)

Mathematical Modeling of Cyclic Deformation

Temis Y., Azmetov K.

(Rus)

卷 4, 编号 2 (2010)

Graph method in reliability theory and practice of technical service

Oleynik A., Lukashev E., Poserenin S., Stavrovskiy M.

(Rus)

Vehicle Acceleration Data for Study of Dynamic Parameters

Gadelshin T., Gadelshin D.

(Rus)

Estimate of the factor of safety of convex bottoms under uniform internal pressure

Lyang V.

(Rus)

卷 7, 编号 1-1 (2013)

The method of selection of the main elements of the hydrostatic transmission wheeled machine

Kyrmaev R., Kruglov S., Lepeshkin A., Medvedev A., Kuru D.

(Rus)

卷 8, 编号 4-1 (2014)

Development of supercharging systems for internal combustion engines for variuos purposes

Kaminskiy R.

(Rus)

卷 8, 编号 1-3 (2014)

Method of plastics endurance testing

Shcherbakov Y., Frolov V.

(Rus)

Dynamic model of GTE bevel drive

Kozharinov E.

(Rus)

卷 14, 编号 3 (2020)

Simulation of vehicle tires based on the finite element method

Tomashevskiy S.

(Rus)

卷 17, 编号 4 (2023)

Identification of maximal cyclic pressure with the non-motorized method based on specific refraction

Plotnikov S., Gnevashev P., Smolnikov M., Shishkin G.

(Rus)

卷 15, 编号 2 (2021)

Development of methodology for calculation of optimal distribution of electric power between power units of condensing power plant

Ilichev V., Yurik E.

(Rus)

CREATING A PROMISING TOOL FOR THE PLANETARY SHAPING OF INTERNAL THREADS ON THE BASIS OF VISUALIZATION OF 3D-MODELING

Kosarev V., Ivanov V.

(Rus)

Influence of Axisymmetric Initial Imperfections of a Spherical Shell on its Critical Load

Grigolyuk E., Lopanitsyn E.

(Rus)

Finding the base for the calculation of quality products at the design stage of working documents

Martishkin V.

(Rus)

卷 8, 编号 3-2 (2014)

Features of high-speed milling machining

Olenin L., Ochkin D.

(Rus)

卷 8, 编号 4-5 (2014)

“Project method” as a mechanism of career orientation of children and young people

Kazun A., Pastukhova L.

(Rus)

卷 9, 编号 2-4 (2015)

The current state of computational analysis methods of strength and reliability of vehicles wheels

Demyaniushko I., Mironova V., Loginov E.

(Rus)

卷 10, 编号 4 (2016)

Reduction in strength requirements of material of the subframe of truck with independent suspension by topological optimization of the design and power scheme

Shabolin M., Vdovin D.

(Rus)

卷 14, 编号 3 (2020)

Overview of approaches to driver fatigue recognition and existing technical solutions

Saprykin Y., Ryazantsev V., Smirnov A.

(Rus)

卷 17, 编号 1 (2023)

Selection of the analytical dependency for assessment of slipping of the Kirovets K-7 wheeled agricultural tractor

Anisimov N., Efimov E., Dobretsov R., Dmitriev M.

(Rus)

METHOD FOR DETERMINATION OF PARAMETRIC RELIABILITY OF SPINDLE UNITS

Ivannikov S., Shandov M.

(Rus)

卷 4, 编号 1 (2010)

Problem of the Plate Flatter in Nonlinear Geometry Arrangement

Kudryavtsev B.

(Rus)

卷 6, 编号 2-1 (2012)

Kinematic and force analysis of universal multiple differential mechanism of automatic gearboxes

Voloshko V., Galimyanov I., Salakhov I., Mavleyev I.

(Rus)

Mathematical support and software for the durability calculation of an expansion joint bellows

Lugantsev L., Trubaeva I.

(Rus)

Methods of visualization of hydrodynamics and non-stationary heat exchange in granular media

Pokusaev B., Karlov S., Nekrasov D., Zaharov N.

(Rus)

卷 7, 编号 1-5 (2013)

Cognitive techniques in the innovation economy

Khizhnyak A., Maksimova Y.

(Rus)

卷 8, 编号 4-2 (2014)

Research of distribution of plastic deformation on thickness of steel strips

Aldunin A., Shumeev A.

(Rus)

卷 8, 编号 4-5 (2014)

Cross-cultural aspect in teaching English

Prudnikova V., Gritsenko A.

(Rus)

卷 8, 编号 3-4 (2014)

Methods for identification and optimization in intelligent systems

Kryzhanovskaya T., Pupkov K.

(Rus)

Application of the analytical functions theory for exact calculations of gear teeth stress

Dorofeev V.

(Rus)

卷 10, 编号 4 (2016)

Method for assessing the changes of the thermal state of cylinder head of engine with air-cooling when boosting

Vasilyev A., Lartsev A., Fedyanov E.

(Rus)

卷 16, 编号 3 (2022)

Influence of an impeller inlet diameter on operation of a high-speed submersible electric pump at the high flow rate modes

Gorbatov D., Zharkovsky A., Adrianov A.

(Rus)

卷 3, 编号 1 (2009)

Practical Realisation of the Innovative Approach to Foreign Language Training in Non-linguistic Universities

Aslamova T., Bashmakova I.

卷 5, 编号 2 (2011)

Method for measuring small segments of cylindrical surfaces

Suslin V., Dzhunkovsky A.

(Rus)

卷 4, 编号 1 (2010)

Capability Check of the Cutting Tool by Method of Final Elements

Mihaylov V., Ivannikov S., Mokrinskaya A.

(Rus)

卷 6, 编号 2-2 (2012)

Mechanical processing with activated air

Chekalova E., Chekalov P.

(Rus)

Behaviour modelling of dispersed substances nanoscale level in a special channel dies

Klevleev V., Kuznetsova I.

(Rus)