浏览标题索引

标题 文件
卷 10, 编号 2 (2016) Innovative developments in the field of intensification of fuel-air mixtures ignition PDF
(Rus)
Egorushkin E., Shabanov A., Shabanov A.
卷 6, 编号 2-4 (2012) The innovative research works of the Scientific and Technical Center "Technique of low temperatures" PDF
(Rus)
Kalnin I.
卷 17, 编号 2 (2023) Innovative developments on the use of hydrogen in transport internal combustion engines and power plants PDF
(Rus)
Shabanov A., Dunin A., Vanin V.
卷 7, 编号 1-5 (2013) Innovative technologies in mechanical engineering PDF
(Rus)
Zadornova N.
卷 4, 编号 1 (2010) Innovative Technologies in Educational Process for Preparation of Engineering Students PDF
(Rus)
Zabenkina E., Artamonov I.
卷 3, 编号 1 (2009) Innovative Technology and Training Teachers for Secondary Education
Kharitonov V.
卷 7, 编号 3-2 (2013) Innovative waste processing technology PDF
(Rus)
Sister V., Zhivotov V., Korobtsev S., Ivannikova E., Yamchuk A.
卷 8, 编号 1-5 (2014) Innovative technologies of advertising design PDF
(Rus)
Povysheva S., Novikova V.
卷 9, 编号 4-5 (2015) An innovative approach to automated recording of the bottom relief on video in the real time with usage of multibeam sonar Hydrosweep DS PDF
(Rus)
Lemenkova P.
卷 4, 编号 2 (2010) Innovative potential of universities for post-crisis development PDF
(Rus)
Kravzova V., Gavshin B., Vasin V., Kanashkin A., Nikulin N.
卷 9, 编号 3-5 (2015) Innovative way of Russia PDF
(Rus)
Gorokhova A., Kargina A., Surov I.
卷 8, 编号 1-5 (2014) Institutional environment of financial infrastructure in context of globalization PDF
(Rus)
Kudryashova V., Smirnova T.
卷 7, 编号 1-4 (2013) PI System and Labview integration PDF
(Rus)
Sofiev A., Rylov M.
卷 5, 编号 2 (2011) Integration of Research Activities of Students and the Educational Process in Order to Create an Innovative Environment at the Department of "Chemistry" PDF
(Rus)
Artamonova I., Zabenkina E., Rusakova S., Godunov E.
卷 8, 编号 2-4 (2014) Integration of Navier-Stokes equations PDF
(Rus)
Vyskrebtsov V.
卷 8, 编号 1-5 (2014) The integrated logistic support of after-sales service of aviation gas turbine engines and gas-pumping installations PDF
(Rus)
Kalugin S.
卷 8, 编号 1-2 (2014) The integrated logistic support for after-sales service of aviation gas turbine engines and gas-pumping installations PDF
(Rus)
Kalugin S.
卷 9, 编号 4-1 (2015) An integrated navigation system of ground transport vehicle PDF
(Rus)
Novikov P., Novikov V., Sheypak A.
卷 8, 编号 1-5 (2014) Intellectual property as a factor of development of innovative economy of Russia PDF
(Rus)
Ulyanova N., Ibroimov G.
卷 7, 编号 2-1 (2013) Intelligent vehicle. Adaptation of subsystem for determination the relative position of moving vehicles PDF
(Rus)
Ivanov A., Shadrin S., Karpukhin K.
卷 4, 编号 2 (2010) Intelligent encoders using galvanomagnetic effects PDF
(Rus)
Gorkin V., Zubkov A., Tyapkin P.
卷 4, 编号 1 (2010) Intelligent Materials Based on Ceramic Composites PDF
(Rus)
Maximov Y., Merzlikin V., Sidorov O., Suttugin V.
卷 9, 编号 4-5 (2015) Intellectual capital in the growth factors of competitiveness of the Russian economy PDF
(Rus)
Novichkov A., Kochetkov A.
卷 9, 编号 1-6 (2015) Intellectual potential for improvement in the world scientific and educational cyberspace PDF
(Rus)
Tsilenko L.
卷 7, 编号 1-4 (2013) Intensification of fuel combustion process and reducing emissions on application of anti-wear additive PDF
(Rus)
Klykanova A.
卷 6, 编号 2-4 (2012) Intensification of flotation cleaning of oil-contaminated water by the preliminary ultrasound activation reagent PDF
(Rus)
Aitova I., Veksler G., Golberg G., Mullakaev M.
卷 4, 编号 2 (2010) Intentional-historical transformation of the major concepts of Russian philosophy in the intellectual intuition in Frank's philosophy PDF
(Rus)
Zhdanov S.
卷 7, 编号 4-2 (2013) Interactive training in the study of legal disciplines in nonspecialized institution PDF
(Rus)
Yurchenko N., Medyankova E.
卷 9, 编号 1-6 (2015) Interactive methods in teaching translation PDF
(Rus)
Borishanskaya M., Kurbakova M.
卷 7, 编号 1-6 (2013) Interactive methods of formation of linguistic competence in teaching of Russian language for non-Russian students of non-philological specialties PDF
(Rus)
Gasanova P., Buyskikh T.
卷 5, 编号 2 (2011) Informatization of Laboratory Works in the Field of Metal Forming PDF
(Rus)
Voronkov V., Petrov P., Saprykin B., Prokopov F., Taranov A.
卷 9, 编号 2-5 (2015) Information security as a factor in the stability of the integrated corporate structures PDF
(Rus)
Apalkova T.
卷 7, 编号 4-2 (2013) Information culture as a condition for successful adaptation of human in information society PDF
(Rus)
Loschilina M., Petrova E.
卷 5, 编号 2 (2011) The Information Revolution and Information Society PDF
(Rus)
Udovik V., Selyutin A.
卷 8, 编号 3-3 (2014) Information system for calculating medical risk factors PDF
(Rus)
Safariants D., Sofiev A.
卷 4, 编号 1 (2010) Information Component of Competitiveness Recovery of Russian Small and Medium Enterprises PDF
(Rus)
Rognova O., Igumnov V., Goncharova A.
卷 9, 编号 1-6 (2015) Information environment as a part of anthropo-ecosystem: philosophical analysis PDF
(Rus)
Loshchilina M., Petrova E.
卷 7, 编号 4-1 (2013) The information-analytical system for organizing competitions expertise of federal, regional and higher levels PDF
(Rus)
Bespalov O., Petukhov V., Shirochenkov A.
卷 9, 编号 4-1 (2015) Information support of an automated control system of work of the rolling stock PDF
(Rus)
Bunakov P., Kondakova A.
卷 8, 编号 4-5 (2014) Information support of controlling PDF
(Rus)
Zadornov K.
卷 5, 编号 1 (2011) Information support of the restructuring process of engineering enterprise PDF
(Rus)
Ionov V., Koltunov A.
卷 9, 编号 1-6 (2015) Information Society and Space of Freedom PDF
(Rus)
Omarova L.
卷 9, 编号 1-5 (2015) Information and innovation-based economic growth as the economic security of the new economy of innovative type PDF
(Rus)
Gridchina A.
卷 6, 编号 2-1 (2012) Information and energy converters for control systems PDF
(Rus)
Melnikov A.
卷 7, 编号 2-1 (2013) Information technologies is an essential tool in creation of modern production of automotive components PDF
(Rus)
Kaminskiy V.
卷 6, 编号 2-1 (2012) Information search for identifying of the trends in the motor engineering development for a specific region (Kazakhstan) PDF
(Rus)
Kim V., Kaminskiy V.
卷 7, 编号 1-4 (2013) Using of algorithm of superposition micropulse lighting for cultivation of phototrophic microorganisms PDF
(Rus)
Biryukov V., Makeyev P., Maltsevskaya N.
卷 9, 编号 1-2 (2015) Use of aramid fibers to increase strength of carbon fiber shear along layers PDF
(Rus)
Mikheev P., Orlov M., Malyshev A., Shatalov R., Verkhov E.
卷 9, 编号 1-5 (2015) The use of outsourcing to improve innovative capacity of domestic enterprises in conditions of globalization PDF
(Rus)
Mandrik N.
卷 3, 编号 1 (2009) Application of Probabilistic Approach to Describe the Kinetic Curves of Dissolution And Leaching of Magnetite
Artamonova I., Gorichev I., Izotov A., Pichugina N., Stepanov V.
卷 9, 编号 4-5 (2015) Usage of auxiliary models for the solution of problems of evaluation of innovative projects in the modern economy PDF
(Rus)
Remizova A., Levitskaya A., Litvin I.
卷 17, 编号 1 (2023) Use of a high-efficiency bimetallic recuperator of micro gas turbine units with the power of under 100 kW PDF
(Rus)
Chu V., Rassokhin V., Barskov V., Matveev Y., Laptev M., Basati Panah M.
卷 11, 编号 2 (2017) The use of hydraulic communication channel in technical systems PDF
(Rus)
Trukhanov K.
卷 3, 编号 2 (2009) Hydrostatic transmission application in automotive vehicles PDF
(Rus)
Kurmaev R., Petrov S.
卷 7, 编号 1-5 (2013) Use of innovative foresight in ensuring the competitiveness of business structures PDF
(Rus)
Lyasnikov N., Dudin M., Sekerin V., Moguev B.
卷 9, 编号 3-5 (2015) Using interactive methods in teaching the humanities for students of non-core areas of training PDF
(Rus)
Surov I., Pastukhova L.
卷 8, 编号 2-5 (2014) Use of information technology for self-knowledge in studying of technical disciplines PDF
(Rus)
Dementyev A., Andreenkov A.
卷 7, 编号 4-2 (2013) Using of historical material in study of Russian language in a technical university PDF
(Rus)
Soluyanova E.
卷 4, 编号 1 (2010) Use of Compleons for Environmentally Friendly Processes of Dissolution of Iron-Oxide Deposits PDF
(Rus)
Artamonova I., Gorichev I., Zabenkina E., Lesnova L.
卷 8, 编号 2-1 (2014) Use of composite materials in air conditioning systems in vehicles PDF
(Rus)
Nagaytsev R., Merkulov V.
卷 8, 编号 4-1 (2014) The use of coefficient of rotating mass in determining reduced (equivalent) moments of inertia PDF
(Rus)
Gusakov D.
卷 7, 编号 2-1 (2013) Use of laser light in automotive lighting PDF
(Rus)
Khortov V., Grebenchikov A., Skvortsov A.
卷 7, 编号 4-2 (2013) Use of logical tools in shaping the language and terminological culture of a lawyer PDF
(Rus)
Karakhanyan S., Inozemtsev V., Timonin V.
卷 8, 编号 1-2 (2014) Use of artificial intelligence methods for constructing a mathematical model of a part for further technological design PDF
(Rus)
Kordyukov A.
卷 6, 编号 1 (2012) USAGE OF MULTIPARAMETER NEURAL NETWORK MODEL TO CONTROL POWER UNITS ON THE BASIS OF INTERNAL COMBUSTION ENGINE PDF
(Rus)
Petrichenko D., Khripach N., Lezhnev L., Papkin B., Shustrov F., Tatarnikov A.
卷 6, 编号 2-4 (2012) Use of distillery bards as raw materials to produce high-protein feed products PDF
(Rus)
Melnikov E., German L., Zakharov Z., Zharko M.
卷 8, 编号 1-3 (2014) Use of potential of negative temperatures of ambient air in cold-storage systems PDF
(Rus)
Marinyuk B., Serenov I., Ugolnikova M.
卷 5, 编号 1 (2011) Hybrid electric vehicle development with mathematical simulation software application PDF
(Rus)
Cheranev S.
卷 2, 编号 2 (2008) Application of management system for public administration of Russia PDF
(Rus)
Filyakin Y., Novikova Y.
卷 2, 编号 1 (2008) Use of Modern Information and Communication Technologies in the Practice of Teaching the Russian language and culture of speech Subject PDF
(Rus)
Kochanova E.
卷 7, 编号 4-2 (2013) Use of modern information technologies in learning of foreign languages ​​in university PDF
(Rus)
Karpova T., Voskovskaya A.
卷 2, 编号 2 (2008) The Use of Solar Energy on Transport PDF
(Rus)
Abbasov E., Pshennov V.
卷 7, 编号 4-1 (2013) Use of fair value for valuation of assets and liabilities of business entities PDF
(Rus)
Rozhnova O., Markov V.
卷 6, 编号 2-1 (2012) Optimal control theory solutions for investigation of a hybrid electric vehicle’s powertrain PDF
(Rus)
Kulikov I.
卷 6, 编号 1 (2012) USE OF FORMAL METHODS TO OBTAIN THE MATHEMATICAL MODEL OF AN OSCILLATORY SYSTEM PDF
(Rus)
Shchetinin Y.
卷 6, 编号 2-4 (2012) The use of pulse-width modulation for reduction the amplitude noise on the example of the contact conductivity meter PDF
(Rus)
Golovin V., Fateev D.
卷 8, 编号 2-3 (2014) Use of magnetic field effects to determine position of drilling tool for installation of underground utilities PDF
(Rus)
Babushkin V.
卷 18, 编号 4 (2024) Testing the effectiveness of the algorithm for suppressing self-oscillations during intensive braking of a vehicle PDF
(Rus)
Klimov A.
卷 7, 编号 3-1 (2013) Research of the adsorptive regularities of anions on the red mud surface PDF
(Rus)
Terekhova M., Rusakova S.
卷 9, 编号 2-1 (2015) Research of automobile active suspension with magnetorheological damper PDF
(Rus)
Abakumov A., Chebotkov E., Randin D.
卷 12, 编号 1 (2018) Investigation of the driven disks of hydromechanical transmission BELAZ with the new LZ_G-Base oil and the friction materials FM-15 and MK-5 PDF
(Rus)
Reginya V., Il'yushchenko A., Leshok A., Rogovoy A., Gryazev D., Petrov V.
卷 2, 编号 1 (2008) Research of the Punch Interaction with Composite Protective Panel PDF
(Rus)
Kulakov N., Lyubin A.
卷 14, 编号 4 (2020) Investigation of the relationship between theoretical and actual turning radii of a tracked vehicle using mathematical modeling PDF
(Rus)
Stadukhin A.
卷 19, 编号 1 (2025) Study of vibrational intensity of a centrifugal disc pump PDF
(Rus)
Lomakin O., Cheremushkin V.
卷 19, 编号 1 (2025) Study of the influence of the mesh density on the heat transfer coefficient in numerical modeling of the transverse flow around a tube bundle of the corridor type PDF
(Rus)
Shevelev D., Zhinov A., Yurik E.
卷 7, 编号 1-4 (2013) Investigation of the influence of the catalyst in the process of producing biodiesel using supercritical methanol PDF
(Rus)
Sister V., Ivannikova E., Kirshankova E.
卷 15, 编号 3 (2021) Study of the effect of finite element dimensions on the simulation accuracy of adhesive bonding in automotive structures PDF
(Rus)
Liu Y., Zuzov V.
卷 7, 编号 2-2 (2013) Research of the influence of the wall thickness variation of blanks punched by drawing with parts thinning on the uneven distribution of mechanical properties in the cross-sections PDF
(Rus)
Ageev N., Zateruha E.
卷 4, 编号 1 (2010) Influence of the Distribution of Power Flows on the Vehicle Traction PDF
(Rus)
Vyuhin A., Bazhenov E., Buynachev S.
卷 16, 编号 3 (2022) Study of the effects of deformation rate and adhesive layer thickness under impact loading on parameters of adhesive joints in a vehicle PDF
(Rus)
Liu Y., Goncharov R., Zuzov V.
卷 7, 编号 1-4 (2013) Study of fuel composition influence on the radiative heat transfer in radiant tube furnace chamber PDF
(Rus)
Vetkin A., Suris A.
卷 4, 编号 2 (2010) Study of the influence of structural parameters on the dynamic load in the mechanical automotive transmission with hybrid powerplant PDF
(Rus)
Selifonov V., Nguyen Khac Tuan -.
卷 2, 编号 1 (2008) The Influence of Carbon on the Properties of Cast Steels with 3% Chromium PDF
(Rus)
Nitkin N., Zuev V.
卷 1, 编号 2 (2007) Influence of chromium on the properties of molded steel for hot deformation PDF
(Rus)
Nitkin N., Zuev V.
卷 9, 编号 1-1 (2015) Investigation of effect of cyclic fuel delivery on start mode of small-sized diesel engine CH8,5 / 11 PDF
(Rus)
Dadilov A.
卷 12, 编号 2 (2018) Investigation of internal dynamics of a two-piston air-hydraulic spring PDF
(Rus)
Cipilev A., ZHarov S.
卷 1, 编号 2 (2007) Study of Optimization of the Hydrostatic Transmission by Indicators of the Acceleration Dynamics and Fuel Efficiency PDF
(Rus)
Bakhmutov S., Gusakov D.
卷 16, 编号 1 (2022) The study of the possibility of the pumping unit optimization for two operation modes, different from the optimal one PDF
(Rus)
Lomakin V., Protopopov A., Mikheev K., Veselov A.
卷 18, 编号 3 (2024) Study of the potential use of hydrodiodes to enhance the volumetric efficiency of a centrifugal pump PDF
(Rus)
Fomenko V., Petrov A., Efremov E.
卷 12, 编号 1 (2018) Investigation of fuel injection in the Common Rail system on the unique scientific facility “Injection” PDF
(Rus)
Kamaltdinov V., Markov V., Lysov I., Popov A., Smoliy A.
卷 2, 编号 1 (2008) Research of High-performance Turbine Fan for Cooling System of the Heavy Truck Turbo-diesel Powerplant PDF
(Rus)
Kustarev Y., Kostyukov A., Andreenkov A.
卷 7, 编号 2-1 (2013) Research of engine with split charge on an experimental plant with separated cylinder PDF
(Rus)
Kuznetsov I., Sychev A., Denisov A.
卷 16, 编号 2 (2022) The study of motion of the snow and swamp-going vehicle with the traction electric drive, based on the Emrax 228 electric motor PDF
(Rus)
Sarach M., Sarach E., Kaplan D.
卷 7, 编号 3-1 (2013) The study of deformations in reinforced plates PDF
(Rus)
Parakhoni A., Osipov N.
卷 9, 编号 4-1 (2015) The study of dynamics of emissions from road transport in Moscow from 2002 to 2030 PDF
(Rus)
Azarov V., Vasiliev A., Kutenev V., Stepanov V.
卷 7, 编号 1-2 (2013) Study of the dynamics of the process of electric discharge sawing by wire tool electrode PDF
(Rus)
Ovsyannikov B., Stavitskaya N.
卷 17, 编号 4 (2023) Study of dependence of lubrication layer thickness in a plain thrust bearing of a sealed pump with a magnetic clutch on area of the working wheel equalizing holes PDF
(Rus)
Pavlovsky D., Petrov A., Protopopov A.
卷 5, 编号 1 (2011) Research and comparative strength analysis of car wheels rims with five-and fifteen-degree coupling shelves PDF
(Rus)
Balabin I., Fomichev Y., Chabunin I., Kartashov N.
卷 6, 编号 2-2 (2012) Research of hardened galvanized sheet bending PDF
(Rus)
Tipalin S.
卷 5, 编号 1 (2011) Analysis of hard-shaped cutter assemblies wear depending on the diameter and intensity of heat rejection PDF
(Rus)
Chulin I., Grechishnikov V.
卷 17, 编号 1 (2023) Investigation of cavitation properties of a mobile pumping unit PDF
(Rus)
PDF
(Eng)
Konshin D., Konkeyev E., Protopopov A., Petrov A.
卷 1, 编号 2 (2007) Investigation of the Kinematics of the Radial Extrusion Process with the Running Deformation Zone PDF
(Rus)
Kalpin Y., Petrov P., Petrov M.
卷 7, 编号 1-3 (2013) The study of the kinetics of dissolution of titanates to improve the sulfate method for the production of titanium dioxide from ilmenite PDF
(Rus)
Rusakova S., Artamonova I., Terekhova M.
卷 5, 编号 1 (2011) Investigation of the kinetic mechanism of nitrogen oxidation in an automotive engine with stratified mixing PDF
(Rus)
Fomin V., Platunov А.
卷 6, 编号 1 (2012) STUDY OF COLLOIDAL GRAPHITE THERMAL BARRIER COATINGS FOR HIGH-CARBON STEELS PDF
(Rus)
Petrov A.
卷 15, 编号 2 (2021) Study of the combined drive of the road train PDF
(Rus)
Zuyev S., Maleyev R., Shmatkov Y., Shirokov P., Yakhutl' D.
卷 13, 编号 1 (2019) Study of the balancing method of the charging station for lithium-ion batteries PDF
(Rus)
Zuev S., Aleksyuk M., Kanarejkin A., Habarova S., Bogachev S.
卷 8, 编号 1-1 (2014) Study of mechanism of influence of internal air flows on overall vehicle aerodynamics PDF
(Rus)
Petrov A.
卷 8, 编号 1-2 (2014) Study of mechanism of structure formation in a process of intensive consolidation of powders using the effect of interparticle splicing PDF
(Rus)
Kokorin V., Filimonov V., Sizov N., Kokorin A., Bryazgin M.
卷 7, 编号 1-2 (2013) Analysis of microstructure of surface layer of a hole while deforming drawing in lubricants PDF
(Rus)
Buylov A.
卷 10, 编号 3 (2016) The study of “real-time” simulation of planar curvilinear motion of six-wheel drive vehicle PDF
(Rus)
Buzunov N.
卷 15, 编号 3 (2021) Research on molecular energy storage PDF
(Rus)
Zuyev S., Maleyev R., Shmatkov Y., Khandzhalov M., Yakhutl' D.
卷 9, 编号 2-1 (2015) Study on the model of automotive electric starter system on the basis of integrated starter-generator PDF
(Rus)
Migunov A., Kaurov S., Alimbekov M.
卷 16, 编号 4 (2022) The study of fuel accumulation in the oil of a gasoline engine with direct fuel injection PDF
(Rus)
Krasnov V., Terenchenko A., Timofeev D., Shibaev I., Stepin N.
卷 8, 编号 3-2 (2014) Study of stress-strain state of mill roller drive elements PDF
(Rus)
Ivochkin M., Gurevich Y., Dimitryuk S.
卷 8, 编号 2-3 (2014) Study of pump separator for gas-liquid mixture for sanitary compartment of space station PDF
(Rus)
Salnikov N., Bobe L., Nikolaykina N., Rykhlov N.
卷 8, 编号 1-1 (2014) The study of non-traditional power sources in electrical starting systems of internal combustion engines PDF
(Rus)
Maleev R., Shmatkov Y.
卷 6, 编号 2-2 (2012) Analysis of machinability of steel 75HGFC PDF
(Rus)
Volkov R., Golobkov A., Kuznetsov V., Cherepahin A.
卷 7, 编号 3-2 (2013) Investigation of nitrogen oxides plasma-chemical processes in the recycling PDF
(Rus)
Suris A.
卷 2, 编号 1 (2008) Study of the Jacketing with Sheet Material Stretching PDF
(Rus)
Shpunkin N., Tipalin S., Gladkov V., Nikitin M.
卷 9, 编号 1-1 (2015) Research of supporting off-road ability with front and rear wheels track mismatch PDF
(Rus)
Ostretsov A., Sharipov V., Bernatsky V., Esakov A., Mordasov A.
卷 17, 编号 1 (2023) Research of features of oscillating process’ behavior in the nonlinear system of individual traction drive of an electrobus PDF
(Rus)
Klimov A., Antonyan A.
卷 8, 编号 4-1 (2014) Study of parametric oscillations of an automobile wheel PDF
(Rus)
Shcherbakov V.
卷 5, 编号 2 (2011) Prospects of High-tech Development of the Russian Federation in Context of the Global Geopolitical Transformations PDF
(Rus)
Platko А.
卷 2, 编号 2 (2008) Analysis of Smoothness of Truck Vehicle Running with the Coupled System of Cushioning PDF
(Rus)
Golovashkin F.
卷 9, 编号 4-1 (2015) Research on displacement of electrohydrodynamic high-pressure pump of diesel engine fuel system PDF
(Rus)
Sokovikov V., Strokov P.
卷 16, 编号 2 (2022) The Study of the Sound Waves Transmission along the Fluid Line through the TsN-2 Electric Pump PDF
(Rus)
Brainin B., Veselov A., Lomakin V., Mikheev K., Petrov A.
卷 9, 编号 1-2 (2015) Research of extrusion process for piston-type hollow parts of car brake system cylinder by cold forging PDF
(Rus)
Filippov Y., Tipalin S., Petrov M., Anfimov Y., Filippov K.
卷 7, 编号 2-2 (2013) Research of the accumulation of damage in the parts of the press-forging equipment and tools by magnetic methods PDF
(Rus)
Kornilova A., Idarmachev I.
卷 7, 编号 1-4 (2013) Investigation of the process of storm waste water treatment from oil PDF
(Rus)
Galieva Y., Suris A.
卷 7, 编号 3-2 (2013) Investigation of the process of regeneration of silica gel by drying it in the super high-frequency electromagnetic field PDF
(Rus)
Shevchenko O., Suris A., Shatalov A.
卷 8, 编号 1-1 (2014) Study of the process of heat transfer in mesh matrix of rotary heat exchanger PDF
(Rus)
Alekseev R., Kostyukov A., Kosach L.
卷 6, 编号 2-1 (2012) Investigation of the heat transfer process in a mesh matrix of a rotary heat exchanger PDF
(Rus)
Alexeev R., Kostyukov A.
卷 8, 编号 1-2 (2014) Study of processing of deep holes and fixing of tubes in parts of heat exchange equipment PDF
(Rus)
Yagutkin E., Kondratenko L., Gunin A., Mogutov I.
卷 3, 编号 2 (2009) Study of damping properties, thermal and strength characteristics of anaerobic materials PDF
(Rus)
Toulinov A., Goncharov A.
卷 18, 编号 4 (2024) Study of operability of the diesel fuel injection equipment in non-conventional conditions PDF
(Rus)
Plotnikov S., Zykov E., Kutergin N., Plekhov D., Kartashevich A.
卷 18, 编号 2 (2024) Study of the operability and effectiveness of the algorithm for controlling the acceleration and deceleration of a wheeled vehicle by means of an accelerator pedal in conditions of highway traffic PDF
(Rus)
Klimov A., Ospanbekov B., Antonyan A.
卷 15, 编号 4 (2021) Modeling the work of the automotive differential with internal friction in the system for calculating the multi body dynamics PDF
(Rus)
Chichekin I., Shuranova A.
卷 9, 编号 2-1 (2015) Study of operation of the model of an integrated starter-generator in generator mode PDF
(Rus)
Migunov A., Kaurov S.
卷 6, 编号 2-4 (2012) The research on iron removal filters PDF
(Rus)
Veregina E., Efremenko T., Surodeeva L., Schibro E.
451 - 600 的 2541 信息 << < 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 > >> 

Согласие на обработку персональных данных с помощью сервиса «Яндекс.Метрика»

1. Я (далее – «Пользователь» или «Субъект персональных данных»), осуществляя использование сайта https://journals.rcsi.science/ (далее – «Сайт»), подтверждая свою полную дееспособность даю согласие на обработку персональных данных с использованием средств автоматизации Оператору - федеральному государственному бюджетному учреждению «Российский центр научной информации» (РЦНИ), далее – «Оператор», расположенному по адресу: 119991, г. Москва, Ленинский просп., д.32А, со следующими условиями.

2. Категории обрабатываемых данных: файлы «cookies» (куки-файлы). Файлы «cookie» – это небольшой текстовый файл, который веб-сервер может хранить в браузере Пользователя. Данные файлы веб-сервер загружает на устройство Пользователя при посещении им Сайта. При каждом следующем посещении Пользователем Сайта «cookie» файлы отправляются на Сайт Оператора. Данные файлы позволяют Сайту распознавать устройство Пользователя. Содержимое такого файла может как относиться, так и не относиться к персональным данным, в зависимости от того, содержит ли такой файл персональные данные или содержит обезличенные технические данные.

3. Цель обработки персональных данных: анализ пользовательской активности с помощью сервиса «Яндекс.Метрика».

4. Категории субъектов персональных данных: все Пользователи Сайта, которые дали согласие на обработку файлов «cookie».

5. Способы обработки: сбор, запись, систематизация, накопление, хранение, уточнение (обновление, изменение), извлечение, использование, передача (доступ, предоставление), блокирование, удаление, уничтожение персональных данных.

6. Срок обработки и хранения: до получения от Субъекта персональных данных требования о прекращении обработки/отзыва согласия.

7. Способ отзыва: заявление об отзыве в письменном виде путём его направления на адрес электронной почты Оператора: info@rcsi.science или путем письменного обращения по юридическому адресу: 119991, г. Москва, Ленинский просп., д.32А

8. Субъект персональных данных вправе запретить своему оборудованию прием этих данных или ограничить прием этих данных. При отказе от получения таких данных или при ограничении приема данных некоторые функции Сайта могут работать некорректно. Субъект персональных данных обязуется сам настроить свое оборудование таким способом, чтобы оно обеспечивало адекватный его желаниям режим работы и уровень защиты данных файлов «cookie», Оператор не предоставляет технологических и правовых консультаций на темы подобного характера.

9. Порядок уничтожения персональных данных при достижении цели их обработки или при наступлении иных законных оснований определяется Оператором в соответствии с законодательством Российской Федерации.

10. Я согласен/согласна квалифицировать в качестве своей простой электронной подписи под настоящим Согласием и под Политикой обработки персональных данных выполнение мною следующего действия на сайте: https://journals.rcsi.science/ нажатие мною на интерфейсе с текстом: «Сайт использует сервис «Яндекс.Метрика» (который использует файлы «cookie») на элемент с текстом «Принять и продолжить».