| Issue |
Title |
File |
| Vol 15, No 3 (2021) |
Study of the effect of finite element dimensions on the simulation accuracy of adhesive bonding in automotive structures |
(Rus)
|
|
Liu Y., Zuzov V.N.
|
| Vol 15, No 3 (2021) |
Method for calculating technical characteristics and parameters of movement of scale models of wheeled vehicles, ensuring the similarity of the processes during testing |
(Rus)
|
|
Zhileykin M.M., Zhurkin M.M.
|
| Vol 15, No 3 (2021) |
Increasing the efficiency and safety of operation of underground tunnel escalators. Management of risks |
(Rus)
|
|
Popov V.A., Yelantsev V.V.
|
| Vol 15, No 3 (2021) |
Experimental studies of the effect of a hybrid inverter on power quality |
(Rus)
|
|
Shklyarskiy Y.E., Skam'in A.N., Vasil'kov O.S.
|
| Vol 15, No 3 (2021) |
Assessment of vehicle damage from the point of a complex technical system with its own structure |
(Rus)
|
|
Tupitsyn I.I., Zubris'kiy S.G., Krasavin P.A.
|
| Vol 15, No 3 (2021) |
Research on molecular energy storage |
(Rus)
|
|
Zuyev S.M., Maleyev R.A., Shmatkov Y.M., Khandzhalov M.Y., Yakhutl' D.R.
|
| Vol 15, No 3 (2021) |
Identification of vehicle directional parameters using the sigma-point Kalman filters |
(Rus)
|
|
Chaplygin A.V., Kulikov I.A.
|
| Vol 15, No 3 (2021) |
Investigation of the environmental performance of a diesel engine when operating on multicomponent biofuel |
(Rus)
|
|
Plotnikov S.A., Sergeyev D.G., Smol'nikov M.V., Shipin A.I.
|
| Vol 15, No 3 (2021) |
A virtual test bench for determining the loads in the air suspension of the rear trolley of a truck at the early stages of design |
(Rus)
|
|
Maksimov R.O., Chichekin I.V.
|
| Vol 15, No 3 (2021) |
Finding the optimal compressor impeller material to improve the efficiency of the turbocharging system |
(Rus)
|
|
Rakhmatullin S.S.
|
| Vol 15, No 2 (2021) |
Comparative analysis of Russian and foreign regulatory requirements for vibration protection of a tractor operator |
(Rus)
|
|
Godzhayev Z.A., Godzhayev T.Z., Lyashenko M.V., Shekhovtsov V.V., Iskaliyev A.I.
|
| Vol 15, No 2 (2021) |
Selection of the characteristics of the suspension system of the high-speed tracked robot |
(Rus)
|
|
Sarach Y.B., Tkachev Y.A., Krokhin M.E.
|
| Vol 15, No 2 (2021) |
Influence of the cross-sectional shape and length of the compressible sections on the characteristics of a linear peristaltic pump |
(Rus)
|
|
Grishin A.I.
|
| Vol 15, No 2 (2021) |
Investigation of the components of the cornering resistance of a tracked vehicle on a solid support base |
(Rus)
|
|
Padalkin B.V.
|
| Vol 15, No 2 (2021) |
Development of methodology for calculation of optimal distribution of electric power between power units of condensing power plant |
(Rus)
|
|
Ilichev V.Y., Yurik E.A.
|
| Vol 15, No 2 (2021) |
Optimization of transient processes of the pneumatic servo drive taking into account the friction model with the Stribeck effect |
(Rus)
|
|
Kireyeva V.A., Trukhanov K.A.
|
| Vol 15, No 2 (2021) |
Study of suspension systems for experimental tanks of the USSR in the second half of the 20th century |
(Rus)
|
|
Tsipilev A.A., Nakaznoy O.A.
|
| Vol 15, No 2 (2021) |
Study of the combined drive of the road train |
(Rus)
|
|
Zuyev S.M., Maleyev R.A., Shmatkov Y.M., Shirokov P.S., Yakhutl' D.R.
|
| Vol 15, No 2 (2021) |
Algorithm of anti-lock braking system for two-axle vehicles with one driving axle with adaptive redistribution of braking forces |
(Rus)
|
|
Zhileykin M.M., Chugunov D.S.
|
| Vol 15, No 2 (2021) |
The issue of improving the efficiency of nitrogen oxide neutralization systems in diesel internal combustion engines |
(Rus)
|
|
Shabanov A.V., Kondratiev D.V., Vanin V.K., Dunin A.Y.
|
| Vol 15, No 1 (2021) |
Improving the efficiency and safety of operation of underground tunnel escalators. Forecasting model |
(Rus)
|
|
Popov V.A., Yelantsev V.V.
|
| Vol 15, No 1 (2021) |
Vibration levels on operator’s workplace and vibration protection characteristics of seat suspensions |
(Rus)
|
|
Godzhayev Z.A., Lyashenko M.V., Shekhovtsov V.V., Potapov P.V., Iskaliyev A.I.
|
| Vol 15, No 1 (2021) |
Calculation of wind turbine generator power characteristics using Windpowerlib software module |
(Rus)
|
|
Ilichev V.Y., Shevelev D.V.
|
| Vol 15, No 1 (2021) |
Modern approach to testing and validation of driver assistance systems |
(Rus)
|
|
Toropov Y.I., Trusov Y.P., Vashurin A.S., Moshkov P.S.
|
| Vol 15, No 1 (2021) |
Calculation of the coefficient of local hydraulic diaphragm resistance in transitional and laminar areas of flow |
(Rus)
|
|
Kondratyev A.S., Ogorodnik K.F., Frikha M.
|
| Vol 15, No 1 (2021) |
Numerical simulation of dynamic processes in transmission of vehicle |
(Rus)
|
|
Hoodorozhkov S.I., Krasilnikov A.А.
|
| Vol 15, No 1 (2021) |
Mathematical modeling of a system for monitoring the insulation resistance of a high-voltage power grid of a hybrid vehicle |
(Rus)
|
|
Malyshev A.N., Grunenkov Y.A., Debelov V.V., Kozlovskiy V.N., Shishkov A.N.
|
| Vol 15, No 1 (2021) |
Topological optimization of the roof structure of a passenger car in order to increase energy intensity in a side impact |
(Rus)
|
|
Sulegin D.A., Zuzov V.N.
|
| Vol 15, No 1 (2021) |
Numerical study of the effect of droplet coagulation intensity on polydisperse aerosol fraction distribution |
(Rus)
|
|
Tukmakov D.A.
|
| Vol 15, No 1 (2021) |
Investigation of the environmental characteristics of a diesel engine when operating on activated fuel |
(Rus)
|
|
Plotnikov S.A., Kartashevich A.N., Motovilova M.V.
|
| Vol 15, No 1 (2021) |
Method for determining the temperature fields of the spark plug |
(Rus)
|
|
Yakhutl' D.R., Maleyev R.A., Zuyev S.M., Shmatkov Y.M., Ryabykh Y.A.
|
| Vol 14, No 4 (2020) |
Reduced rutting of wide-grip sprinklers |
(Rus)
|
|
Zhuravleva L.A., Tkhuan N.V.
|
| Vol 14, No 4 (2020) |
Optimization of the design and experimental study of the stress-strain state of the rear suspension balancer of an all-terrain vehicle |
(Rus)
|
|
Shabolin M.L.
|
| Vol 14, No 4 (2020) |
Investigation of the relationship between theoretical and actual turning radii of a tracked vehicle using mathematical modeling |
(Rus)
|
|
Stadukhin A.A.
|
| Vol 14, No 4 (2020) |
Results of field studies of a tractor of traction class 1,4 with an elastic damping mechanism in a power drive |
(Rus)
|
|
Sen'kevich S.E., Il'chenko Y.N., Godzhayev Z.A., Duryagina V.V.
|
| Vol 14, No 4 (2020) |
Volumetric hydraulic drive with series connection of hydraulic actuators |
(Rus)
|
|
Pil'gunov V.N., Yefremova K.D.
|
| Vol 14, No 4 (2020) |
Model of the dynamics of a wheeled vehicle for a complex of full-scale-mathematical modeling |
(Rus)
|
|
Kositsyn B.B.
|
| Vol 14, No 4 (2020) |
Preliminary synthesis of algorithms for automatic control of automobile continuously variable transmissions with flexible links |
(Rus)
|
|
Yesakov A.E., Kretov A.V., Krasavin P.A.
|
| Vol 14, No 4 (2020) |
Improving the operational efficiency of the linear type peristaltic pump |
(Rus)
|
|
Grishin A.I.
|
| Vol 14, No 4 (2020) |
Evaluation of indicators of curvilinear movement of a road train using mathematical simulation |
(Rus)
|
|
Gorelov V.A., Yevseyev K.B., Chudakov O.I., Balkovskiy K.S.
|
| Vol 14, No 3 (2020) |
Technical and economic analysis of the efficiency of a low-power wind farm in the climatic conditions of the center of the European part of Russia |
(Rus)
|
|
Jinov A.A., Shevelev D.V., Metlitsky N.E.
|
| Vol 14, No 3 (2020) |
Problems of using active-recuperative suspension and ways to solve them |
(Rus)
|
|
Zamyslov V.M., Yesakov A.E.
|
| Vol 14, No 3 (2020) |
Entropy-statistical analysis of the air conditioning cycle of an aircraft |
(Rus)
|
|
Merkulov V.I., Tishchenko I.V., Abalakin S.A.
|
| Vol 14, No 3 (2020) |
Mathematical modeling of the functioning process of a single-cylinder air-cooled diesel engine taking into account the consumption of crankcase gases |
(Rus)
|
|
Pavlov D.V., Platonov K.Y., Khmelev R.N.
|
| Vol 14, No 3 (2020) |
Comparative characteristics of diesel engines and gas turbine power plants for mobile vehicles |
(Rus)
|
|
Gusarov V.A., Godzhaev Z.A.
|
| Vol 14, No 3 (2020) |
Simulation of vehicle tires based on the finite element method |
(Rus)
|
|
Tomashevskiy S.B.
|
| Vol 14, No 3 (2020) |
Methodology for conducting climatic tests in cabins and habitable compartments of wheeled and tracked vehicles |
(Rus)
|
|
Vereshchagin S.B.
|
| Vol 14, No 3 (2020) |
Mobility of aggregates of promising missile systems based on road trains with an active trailed link |
(Rus)
|
|
Berdnikov A.A., Strel'tsov R.V., Dyunov V.A., Zol'nikov I.V.
|
| Vol 14, No 3 (2020) |
Experimental evaluation of the load capacity of the rollers of gravity conveyors for pallets |
(Rus)
|
|
Safronov Y.V., Nosko A.L.
|
| Vol 14, No 3 (2020) |
Increase of strength of cast-iron cylinder liners of engines of road construction vehicles |
(Rus)
|
|
Ovsyannikov V.E., Shpitko G.N., Nekrasov R.Y., Vas'kov D.E.
|
| Vol 14, No 3 (2020) |
Overview of approaches to driver fatigue recognition and existing technical solutions |
(Rus)
|
|
Saprykin Y.D., Ryazantsev V.I., Smirnov A.A.
|
| Vol 14, No 3 (2020) |
Optimization of the ethanol-fuel emulsion composition for use in diesel engines |
(Rus)
|
|
Plotnikov S.A., Kartashevich A.N., Plyago A.V., Pachurin G.V.
|
| Vol 14, No 2 (2020) |
Method for assessing the effectiveness of the use of electromechanical transmissions of vehicles at the design stage |
(Rus)
|
|
Padalkin B.V., Ivanenkov V.V., Kositsyn B.B., Stadukhin A.A., Balkovskiy K.S.
|
| Vol 14, No 2 (2020) |
Assessment of the stress-strain state in the weld zone for the forklift truck frame |
(Rus)
|
|
Shcherbakov A.P., Pushkarev A.E., Manvelova N.E.
|
| Vol 14, No 2 (2020) |
Development of a boost system turbocompaund piston engine |
(Rus)
|
|
Filippov A.S., Kaminsky V.N., Kaminsky R.V., Titchenko A.Y., Kostyukov E.A.
|
| Vol 14, No 2 (2020) |
Development and testing of a mathematical model of the engine pre-start operation at low ambient temperatures |
(Rus)
|
|
Yelagin M.Y., Pavlov D.V., Khmelev R.N.
|
| Vol 14, No 2 (2020) |
The choice of the rational design of the mobile robot mover for urban environment |
(Rus)
|
|
Tsipilev A.A., Smirnov I.A.
|
| Vol 14, No 2 (2020) |
Analysis of the heat balance of a spacesuit in a solar airplane |
(Rus)
|
|
Rezanov E.A., Merkulov V.I., Tishchenko V.I.
|
| Vol 14, No 2 (2020) |
Establishing relationships between fuel economy and gear ratios of bus transmission units |
(Rus)
|
|
Kravets V.N., Musarskiy R.A., Tumasov A.V.
|
| Vol 14, No 2 (2020) |
Study of the effectiveness of the electromechanical system of active vibration protection of a vehile with various regulators |
(Rus)
|
|
Randin D.G., Tulupov P.V.
|
| Vol 14, No 2 (2020) |
Electromechanical transmission for tractors and road-building machinery |
(Rus)
|
|
Porshnev G.P., Dobretsov R.Y., Krasilnikov A.А.
|
| Vol 14, No 2 (2020) |
Mathematical modeling of drives with tandem pneumatic cylinders |
(Rus)
|
|
Zhurkin N.A., Donskoy A.S., Zharkovskiy A.A.
|
| Vol 14, No 2 (2020) |
Interaction of elements of the telescopic boom as a result of sudden load removal |
(Rus)
|
|
Potakhov E.A., Vatulin Y.S.
|
| Vol 14, No 2 (2020) |
Thermodynamic similar indicator diagrams of the heat engines Energy non-dimensional diagram of the heat engine closed cycle |
(Rus)
|
|
Kalnitskiy F.E., Morozov D.l., Tatarov M.G., Fedulov A.I.
|
| Vol 13, No 1 (2019) |
Improvement of four-wheel drive vehicle controllability with a connected front axle through the redistribution of torque |
(Rus)
|
|
ZHilejkin M.M., EHranosyan A.V.
|
| Vol 13, No 1 (2019) |
Improving the energy efficiency of vehicle electrical systems |
(Rus)
|
|
CHernov A.E., Akimov A.V.
|
| Vol 13, No 1 (2019) |
Development of multicomponent mixed bio-hydrocarbon fuel for diesel engines |
(Rus)
|
|
Soo S., Sater H.A., Hodyakov A.A., Hlopkov S.V.
|
| Vol 13, No 1 (2019) |
Substantiation of the requirements for the suspension of unmanned transport vehicles |
(Rus)
|
|
Sarach E.B., Smirnov I.A., Tkachev Y.A.
|
| Vol 13, No 1 (2019) |
Selection of parameters of a three-flow parallel electromechanical transmission of a tracked vehicle |
(Rus)
|
|
Padalkin B.V., Staduhin A.A.
|
| Vol 13, No 1 (2019) |
Agricultural tractors on Russian market (based on the International exhibition “Agrosalon 2018”) |
(Rus)
|
|
Parfenov A.P.
|
| Vol 13, No 1 (2019) |
Study of the modes of operation of capacitive energy storage in the automobile engine start systems |
(Rus)
|
|
Maleev R.A., Zuev S.M., Lavrikov A.A., Grebenchikov N.P.
|
| Vol 13, No 1 (2019) |
Comparative analysis of the options for strengthening the cockpit of the D2 class buggy according to the technical regulations of the competition |
(Rus)
|
|
Bazhenov E.E., Bujnachev S.K., Kustovskij A.N.
|
| Vol 13, No 1 (2019) |
Study of the balancing method of the charging station for lithium-ion batteries |
(Rus)
|
|
Zuev S.M., Aleksyuk M.R., Kanarejkin A.I., Habarova S.D., Bogachev S.A.
|
| Vol 13, No 1 (2019) |
Flow diagrams for tribological testing of transport engineering units |
(Rus)
|
|
Glazunov D.V.
|
| Vol 13, No 1 (2019) |
Method of calculating the heat and stress-deformed state of the cylinder head of a transport diesel with liquid cooling |
(Rus)
|
|
Gotz A.N., Klevtsov V.S.
|
| Vol 12, No 4 (2018) |
Reducing the emission of solid particles from the exhaust gases of the internal combustion engine by increasing the efficiency of the catalytic converter |
(Rus)
|
|
Kukis V.S., Omel'chenko E.A.
|
| Vol 12, No 4 (2018) |
The way to improve the efficiency of the neutralization system of nitrogen oxides of diesel internal combustion engines and its efficiency |
(Rus)
|
|
Shabanov A.V., Solomin V.A., Shabanov A.A.
|
| Vol 12, No 4 (2018) |
The calculation of the peristaltic pump characteristics taking into account the roughnesses on the internal surface of the working member |
(Rus)
|
|
Grishin A.I.
|
| Vol 12, No 4 (2018) |
Problems of finding the best solutions to ensure the passive safety of the cabins of trucks at a minimum weight |
(Rus)
|
|
Goncharov R.B., Zuzov V.N.
|
| Vol 12, No 4 (2018) |
Limits of applicability of the standard method for estimating the torsional rigidity of spatial frames of buggy vehicle |
(Rus)
|
|
Bazhenov E.E., Bujnachev S.K., Kustovskij A.N.
|
| Vol 12, No 4 (2018) |
Calculated and experimental evaluation of the performance of the brake disc made of titanium alloy |
(Rus)
|
|
Eremin V.P., Komarova M.G., Eremin G.P.
|
| Vol 12, No 4 (2018) |
Concept design - creating the image of the future |
(Rus)
|
|
Lepeshkin I.A.
|
| Vol 12, No 4 (2018) |
Ways to improve diesel engine fuel systems |
(Rus)
|
|
Strel'cov R.V., Berdnikov A.A., Vasil'ev V.G., Dyunov V.A., Mel'nikov E.I., Ladanov V.I.
|
| Vol 12, No 4 (2018) |
Topology optimization in ROPS-safe design process of operator cabin for forestry, agricultural and construction machinery |
(Rus)
|
|
Vdovin D.C.
|
| Vol 12, No 4 (2018) |
Power plants of motor transport: development prospects |
(Rus)
|
|
Fomin V.M., Gusarov V.V.
|
| Vol 12, No 4 (2018) |
The concept of the controlled movement of the tracked vehicle |
(Rus)
|
|
Beketov S.A.
|
| Vol 12, No 4 (2018) |
Calculation and experimental analysis of the V-belt variator motor |
(Rus)
|
|
Balovnev N.P., Dmitrieva L.A.
|
| Vol 12, No 4 (2018) |
Diagnosis of electronic engine control systems for LADA automobile |
(Rus)
|
|
Bazhenov Y.V., Kalenov V.P.
|
| Vol 12, No 3 (2018) |
The toxicity study of diesel engines working on biofuels based on methyl alcohol |
(Rus)
|
|
Lihanov V.A., Lopatin O.P.
|
| Vol 12, No 3 (2018) |
Age of aerodynamics of automobiles |
(Rus)
|
|
Korolev E.V., ZHamalov R.R., Bernackij V.V.
|
| Vol 12, No 3 (2018) |
Swelling of samples of automotive rubber products in standard fluid, engine oil and tribotechnical compound |
(Rus)
|
|
Azanov A.V., Bernackij V.V., Razuvaev P.E., Hlopkov S.V., Hodyakov A.A.
|
| Vol 12, No 3 (2018) |
The training of specialists in sphere of power engineering |
(Rus)
|
|
Fomin V.M., Gots A.N.
|
| Vol 12, No 3 (2018) |
Comparison of the analytical solutionof efficieтcy regenerative rotating heatexchangethe device with resultsof numericalcalculations |
(Rus)
|
|
Kalnitsky F.E., Kostyukov A.V.
|
| Vol 12, No 3 (2018) |
The method for determining the rational parameters of the kinematics of the suspension systems for high-speed tracked vehicles |
(Rus)
|
|
Cipilev A.A., Sarach E.B.
|
| Vol 12, No 3 (2018) |
The method of determining the efforts of the pre-tightening of bolts to a bearing of the crankshaft, automobile and tractor engines |
(Rus)
|
|
Gots A.N.
|
| Vol 12, No 3 (2018) |
Development of vehicle undercarriage with roadster body using topological optimization |
(Rus)
|
|
Basov A.O., Smirnov A.A.
|
| Vol 12, No 3 (2018) |
Method for calculating the characteristics of a linear type peristaltic pump with incomplete compression of the working member |
(Rus)
|
|
Grishin A.I.
|
| Vol 12, No 3 (2018) |
Investigation of the main factors of the process of ignition of a homogeneous mixture from compression in an ICE |
(Rus)
|
|
Makarov A.R., Smirnov S.V., Kostyukov A.V., Ponomareva K.A.
|
| Vol 12, No 3 (2018) |
Digital PID controller for pneumatic and hydraulic systems |
(Rus)
|
|
Truhanov K.A.
|
| Vol 12, No 2 (2018) |
Prospects for the use of automated and robotized electric drives on mobile energy equipment and agricultural machinery working bodies |
(Rus)
|
|
Godzhaev Z.A., Izmajlov A.Y., Lachuga Y.F., SHogenov Y.H.
|
| Vol 12, No 2 (2018) |
Determination of the time and the path of acceleration of a vehicle equipped with a gearbox without switching-off of the power flow |
(Rus)
|
|
Ryabev A.V., Parfenov A.P.
|
| Vol 12, No 2 (2018) |
Optimization of the working cycle of a transport diesel engine by simulating the combustion process with a double Wiebe function |
(Rus)
|
|
Kamaltdinov V.G., Markov V.A., Lysov I.O., Popov A.E., Smolij A.E.
|
| Vol 12, No 2 (2018) |
Influence of the elements of the spatial bearing system of the vehicle of increased cross-country ability of the “buggy” class on the parameters of its stress-strain state |
(Rus)
|
|
Bazhenov E.E., Bujnachev S.K., Kustovskij A.N.
|
| Vol 12, No 2 (2018) |
Mathematical model for assessing the influence of a coupled suspension system on the smooth running of a tracked vehicle |
(Rus)
|
|
Sarach E.B., Cipilev A.A., Kurasova M.S.
|
| Vol 12, No 2 (2018) |
Quasi-finite element model of rolling elastic wheels on uneven deformable substructure in nonlinear motion of a wheeled vehicle |
(Rus)
|
|
Volskaja N.S., Zhileykin M.M., Zakharov A.J., Panshin M.V.
|
| Vol 12, No 2 (2018) |
Topological optimization of the automobile bumper design under impact from the passive safety standpoint |
(Rus)
|
|
Goncharov R.B., Zuzov V.N.
|
| Vol 12, No 2 (2018) |
One-dimensional univariate work simulation of turbocharged engine with restrictor before compressor inlet |
(Rus)
|
|
Tatarov M.G.
|
| Vol 12, No 2 (2018) |
Linear positioner based on pneumatic muscle |
(Rus)
|
|
Efremova K.D., Pil'gunov V.N.
|
| Vol 12, No 2 (2018) |
Investigation of internal dynamics of a two-piston air-hydraulic spring |
(Rus)
|
|
Cipilev A.A., ZHarov S.S.
|
| Vol 12, No 2 (2018) |
The digital gauge of a tension of a belt of a gas-distributing mechanism and the generator in VAZ vehicles |
(Rus)
|
|
Ermakov V.V., Maleev R.A., Holodov A.A., SHmatkov Y.M.
|
| Vol 12, No 1 (2018) |
Modeling of the mechanism of appearance of external infrasound of land vehicles |
(Rus)
|
|
Nyunin B.N., Grafkina M.V., Sviridova E.Y.
|
| Vol 12, No 1 (2018) |
Modernization of the cooling system for diesel engines of the YAMZ family with the aim of reducing cavitation damages |
(Rus)
|
|
Strel'tsov R.V., Vasil'ev V.G., Arabyan A.K., Mamoshin A.I.
|
| Vol 12, No 1 (2018) |
Automation of the control of the differential lock in the transmission of a multi-axle wheeled vehicle |
(Rus)
|
|
Safonov B.A., Kotiev G.O., Smirnov A.A.
|
| Vol 12, No 1 (2018) |
Frequency analysis of the system of stabilization of vertical reactions on the wheels |
(Rus)
|
|
Al'salamekh B., Ryazantsev V.I.
|
| Vol 12, No 1 (2018) |
Improvement of methods for calculating the interaction of propellers of multi-axle wheeled vehicles with barrier obstacles |
(Rus)
|
|
Papunin A.V., Belyakov V.V.
|
| Vol 12, No 1 (2018) |
Automated traffic control system based on recognition of the road scene and its objects |
(Rus)
|
|
Porubov D.M., Beresnev P.O., Tyugin D.Y., Tumasov A.V., Belyakov V.V., Zezyulin D.V.
|
| Vol 12, No 1 (2018) |
Investigation of the driven disks of hydromechanical transmission BELAZ with the new LZ_G-Base oil and the friction materials FM-15 and MK-5 |
(Rus)
|
|
Reginya V.V., Il'yushchenko A.F., Leshok A.V., Rogovoy A.N., Gryazev D.A., Petrov V.A.
|
| Vol 12, No 1 (2018) |
The automobile and tractor diesel engine, adapted to work on the liquefied hydrocarbon gas on the gas-diesel process |
(Rus)
|
|
Izmaylov A.Y., Savel'ev G.S., Kochetkov M.N., Ovchinnikov E.V., Uyutov S.Y.
|
| Vol 12, No 1 (2018) |
Investigation of fuel injection in the Common Rail system on the unique scientific facility “Injection” |
(Rus)
|
|
Kamaltdinov V.G., Markov V.A., Lysov I.O., Popov A.E., Smoliy A.E.
|
| Vol 12, No 1 (2018) |
Ejector-type heat exchangers in the air conditioning in transport |
(Rus)
|
|
Merkulov V.I., Popov A.A., Polikarpov A.V., Tishchenko I.V.
|
| Vol 12, No 1 (2018) |
The electric starting systems of automobile internal combustion engines with alternative sources of current |
(Rus)
|
|
Maleev R.A., Shmatkov Y.M., Kholodov A.A.
|
| Vol 12, No 1 (2018) |
Calculation investigation of the strength of the composite wheel rim |
(Rus)
|
|
Bol'shikh A.A., Vdovin D.S., Eremin G.P.
|
| Vol 11, No 4 (2017) |
Load distribution by zones of frame sub-constructions of D2 class buggy racing car |
(Rus)
|
|
Bazhenov E.E., Buynachev S.K., Kustovskiy A.N.
|
| Vol 11, No 4 (2017) |
The new standard on the administrative aspect of registration changes in the design of the vehicle |
(Rus)
|
|
Girutskiy O.I., Kirillov K.A.
|
| Vol 11, No 4 (2017) |
Dependence of durability and wear resistance on forcing and inaccuracies in ICE production |
(Rus)
|
|
Kochenov V.A., Kazakov S.S., Grunin K.E.
|
| Vol 11, No 4 (2017) |
Efficiency of application of direct-drive circuit for improvement of starting characteristics of gas turbine engine |
(Rus)
|
|
Chechulin A.Y., Krivoshev I.A.
|
| Vol 11, No 4 (2017) |
Absorption of gasoline vapors in automobile adsorber with a carbon filter |
(Rus)
|
|
Khodyakov V.A., Rachkova V.A., Bernatskiy V.V., Khlopkov S.V., Abu-Nidzhim R.K.
|
| Vol 11, No 4 (2017) |
Necessity to create agricultural vehicles |
(Rus)
|
|
Godzhaev Z.A., Evtyushenkov N.E., Kryukov M.L., Zakarchevskiy O.V.
|
| Vol 11, No 4 (2017) |
Speed characteristics of automobile diesel engine operating on natural gas |
(Rus)
|
|
Likhanov V.A., Grebnev A.V., Skryabin M.L., Toropov A.E.
|
| Vol 11, No 4 (2017) |
A crane-manipulator transfer position impact on a chassis loadings of a base vehicle |
(Rus)
|
|
Lagerev A.V., Lagerev I.A.
|
| Vol 11, No 4 (2017) |
Determination of the geometric shape of the air collector for supplying thermal energy to the heating system of electric bus batteries |
(Rus)
|
|
Prokhorov I.V., Butarovich D.O.
|
| Vol 11, No 4 (2017) |
Comparison of traction and longevity of caterpillar driving machines of agricultural tractors |
(Rus)
|
|
Shchel'tsyn N.A., Beynenson V.D., Fedotkin R.S., Kryuchkov V.A., Belyy I.F., Revenko V.Y.
|
| Vol 11, No 4 (2017) |
Development of an experimental research complex for determining parameters of interaction of a pneumatic tire with ground |
(Rus)
|
|
Vol'skaya N.S., Zakharov A.Y., Anisimov M.M.
|
| Vol 11, No 4 (2017) |
Improvement of design of water evaporative air coolers in tractor cabins |
(Rus)
|
|
Mikhaylov V.A., Sharipova N.N., Dmitriev M.I.
|
| Vol 11, No 3 (2017) |
Technique for evaluating the efficiency of a V-belt variator in a light vehicle |
(Rus)
|
|
Luk'yanov A.S., Starikov A.I.
|
| Vol 11, No 3 (2017) |
Mathematical models of tires and calculation of contact pressure on soil |
(Rus)
|
|
Manafi Sheydan H.
|
| Vol 11, No 3 (2017) |
The choice of the concept of automobile with combined energy transmission of expanded functionality |
(Rus)
|
|
Baulina E.E., Krutashov A.V., Serebryakov V.V.
|
| Vol 11, No 3 (2017) |
Experimental verification of the reliability of the method of designing driving wheels of pin gearing with rubber-reinforced caterpillars |
(Rus)
|
|
Sharipov V.M., Fedotkin R.S., Kryuchkov V.A., Bogdanov K.A., Volkov P.I.
|
| Vol 11, No 3 (2017) |
Design and calculation of hydrostatic steering |
(Rus)
|
|
Sharipov V.M., Esenovskiy-Lashkov M.Y., Klimova E.V.
|
| Vol 11, No 3 (2017) |
Modern methods of synthesis of automatic planetary gearboxes |
(Rus)
|
|
Salamandra K.B.
|
| Vol 11, No 3 (2017) |
Optimization of vehicle acceleration process, taking into account the mode of operation of its engine |
(Rus)
|
|
Ulanov A.G.
|
| Vol 11, No 3 (2017) |
Optimization of the turbine diffuser of a multipurpose microturbine |
(Rus)
|
|
Kosach L.A., Gornovskiy A.S., Kostyukov A.V., Eliseev K.Y.
|
| Vol 11, No 3 (2017) |
Problems in the implementation of the control system for vertical reactions of vehicle wheels |
(Rus)
|
|
Ryazantsev V.I., Al'salamekh B., Levenkov Y.Y.
|
| Vol 11, No 3 (2017) |
Design of an independent vehicle suspension guide using the topological optimization method |
(Rus)
|
|
Vdovin D.S., Prokopov V.S., Ryabov D.M.
|
| Vol 11, No 3 (2017) |
Optimization and debugging of a low-toxic combustion chamber with the use of numerical modeling of intrachamber processes |
(Rus)
|
|
Gornovskiy A.S., Valeev A.G., Kosach L.A., Kostyukov A.V.
|
| Vol 11, No 2 (2017) |
Algorithm for navigation of ground-based transport-technological facilities on the basis of integrated inertial-satellite navigation and odometer data |
(Rus)
|
|
Novikov P.V., Sheypak A.A., Gerdi V.N., Novikov V.V., Enin V.N.
|
| Vol 11, No 2 (2017) |
Static characteristics of the pneumatic power amplifier "nozzle-shutter" |
(Rus)
|
|
Pil'gunov V.N., Efremova K.D.
|
| Vol 11, No 2 (2017) |
Perspectives of using humidification subsystems for air conditioning in transport |
(Rus)
|
|
Merkulov V.I., Popov A.A.
|
| Vol 11, No 2 (2017) |
The hydrodifferential rectifier of the moment of inertial automatic transmission of mobile machines |
(Rus)
|
|
Greben'kov D.V.
|
| Vol 11, No 2 (2017) |
The use of hydraulic communication channel in technical systems |
(Rus)
|
|
Trukhanov K.A.
|
| 1 - 150 of 2404 Items |
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 > >>
|
