Model of the Formation of the Multilayer Coating Composition During Plasma-assisted Deposition
- Authors: Shanin S.A.1, Efremenkov E.A.1
-
Affiliations:
- Issue: Vol 20, No 1 (2018)
- Pages: 69-79
- Section: MATERIAL SCIENCE
- URL: https://bakhtiniada.ru/1994-6309/article/view/302061
- DOI: https://doi.org/10.17212/1994-6309-2018-20.1-69-79
- ID: 302061
Cite item
Full Text
Abstract
Introduction. A modern technical equipment is working in the conditions of high temperature and stress. The technology development demands to create new material with specific properties. Magnetron and vacuum-arc methods of coatings formation using high-melting-point materials have wide expansion for the improvement of detail performance properties. Mathematical modeling is a good alternative to detailed experimental research, allowing to study individual phenomena at different stages of coating formation and to predict the composition and macroscopic properties of the coating change with varying technological conditions. And this, in turn, allows optimizing the technological process. The purpose of the work: to determine the degree of influence of cross effects, as well as the mutual influence of the transfer processes on the formation of the multilayer coating composition when plasma-assisted deposition to the substrate. Mathematical modeling of the coating growth process taking into account combination of physical and chemical stages is conducted. Methods of research are computational methods. In the paper, coupled model of formation of multilayer coating on the surface of cylindrical detail by plasma-assisted deposition is presented. The model considers such effects, as thermal diffusion, diffusion thermal conductivity, the mass transfer by action of stress gradient and formation of chemical compounds. Results and Discussion. The influence of cross-effects, as well as the mutual influence of the transport processes in the formation of the multilayer coating deposited from the plasma, is theoretically investigated. It is shown that the composition of the plasma affects the evolution of the coating composition. It is determined that taking into account the mass and heat transfer due to the stress gradient has a noticeable effect on the coating composition. It is found that for the selected systems, thermal diffusion and diffusion thermal conductivity affect the distribution of concentrations only at the initial stage of the coating deposition process.
Keywords
About the authors
S. A. Shanin
Email: shanin_s@mail.ru
Ph.D. (Physics and Mathematics), National Research Tomsk Polytechnic University, shanin_s@mail.ru
E. A. Efremenkov
Email: ephrea@mail.ru
Ph.D. (Engineering), National Research Tomsk Polytechnic University, ephrea@mail.ru
References
- Fan W., Bai Y. Review of suspension and solution precursor plasma sprayed thermal barrier coatings // Ceramics International. – 2016. – Vol. 42, iss. 13. – P. 14299–14312. – doi: 10.1016/j.ceramint.2016.06.063.
- Bobzin K. High-performance coatings for cutting tools // CIRP Journal of Manufacturing Science and Technology. – 2017. – Vol. 18. – P. 1–9. – doi: 10.1016/j.cirpj.2016.11.004.
- Ephremenkov E.A., Kobza E.E., Efremenkova S.K. Force analysis of double pitch point cycloid drive with intermediate rolling elements and free retainer // Applied Mechanics and Materials. – 2015. – Vol. 756. – P. 29–34. – doi: 10.4028/
- Wear resistance investigation of titanium nitride-based coatings / Santecchia E., Hamouda A.M.S., Musharavati F. E. Zalnezhad, M. Cabibbo, S. Spigarelli // Ceramics International. – 2015. – Vol. 41, iss. 9. – P. 10349–10379. – doi: 10.1016/j.ceramint.2015.04.152.
- Corrosion resistance of CrN and CrCN/CrN coatings deposited using cathodic arc evaporation in Ringer's and Hank's solutions / A. Gilewicz, P. Chmielewska, D. Murzynski, E. Dobruchowska, B. Warcholinski // Surface and Coatings Technology. – 2016. – Vol. 299. – P. 7–14. – doi: 10.1016/j.surfcoat.2016.04.069.
- Corrosion protection of steel with multilayer coatings: improving the sealing properties of physical vapor deposition CrN coatings with Al2O3/TiO2 atomic layer deposition nanolaminates / J. Leppäniemi, P. Sippola, M. Broas, J. Aromaa, H. Lipsanen, J. Koskinen // Thin Solid Films. – 2017. – Vol. 627. – P. 59–68. – doi: https://doi.org/10.1016/j.tsf.2017.02.050.
- Yang Y.H., Wu F.B. Microstructure evolution and protective properties of TaN multilayer coatings // Surface and Coatings Technology. – 2006. – Vol. 308. – P. 108–114. – doi: 10.1016/j.surfcoat.2016.05.091.
- CrVN/TiN nanoscale multilayer coatings deposited by DC unbalanced magnetron sputtering / E. Contreras, Y. Galindez, M.A. Rodas, G. Bejarano, M.A. Gómez // Surface and Coatings Technology. – 2017. – Vol. 332. – P. 214–222. – doi: 10.1016/j.surfcoat.2017.07.086.
- Пузряков А.Ф. Теоретические основы плазменного напыления. – М.: Изд-во МГТУ им. Н.Э. Баумана, 2008. – 360 с.
- Microstructural design and properties of supersonic suspension plasma sprayed thermal barrier coatings / W. Fan, Y. Bai, J.R. Li, Y. Gao, H.Y. Chen, Y.X. Kang, W.J. Shi, B.Q. Li // Journal of Alloys and Compounds. – 2017. – Vol. 699. – P. 763–774. – doi: 10.1016/j.jallcom.2016.12.356.
- Enhanced surface properties of aluminum by PVD-TiN coating combined with cathodic cage plasma nitriding / M.I. Bashir, M. Shafiq, M. Naeem, M. Zaka-ul-Islam, J.C. Díaz-Guillén, C.M. Lopez-Badilloe, M. Zakaullaha // Surface and Coatings Technology. – 2017. – Vol. 327. – P. 59–65. – doi: 10.1016/j.surfcoat.2017.08.015.
- Simulation of phase transformation kinetics in thin films under a constant nucleation rate / M. Moghadam, E. Pang, T. Philippe, P. Voorhees // Thin Solid Films. – 2016. – Vol. 612. – P. 437–444.
- Prediction of the properties of PVD/CVD coatings with the use of FEM analysis / A. Sliwa, J. Mikula, K. Golombek, T. Tanski, M. Bonek // Applied Surface Science. – 2016. – Vol. 388. – P. 281–287.
- Bogdanovich V.I., Giorbelidze M.G. Mathematical modelling of thin-film polymer heating during obtaining of nanostructured ion-plasma coatings // Procedia Engineering. – 2017. – Vol. 201. – P. 630–638. – doi: 10.1016/j.proeng.2017.09.677.
- Monte Carlo simulation of the PVD transport process for alloys / E. Lugscheider, K. Bobzin, N. Papenfu?-Janzen, D. Parkot // Surface and Coatings Technology. – 2005. – Vol. 200. – P. 913–915.
- Ali R., Sebastiani M., Bemporad E. Influence of Ti–TiN multilayer PVD-coatings design on residual stresses and adhesion // Materials & Design. – 2015. – Vol. 75. – P. 47–56.
- Experimental and modeling study on the role of Ar addition to the working gas on the development of intrinsic stress in TiN coatings produced by filtered vacuum-arc plasma / V.V. Vasyliev, A.I. Kalinichenko, E.N. Reshetnyak, G. Taghavi Pourian Azar, M. Ürgen, V.E. Strel'nitskij // Thin Solid Films. – 2017. – Vol. 642. – P. 207–213. – doi: 10.1016/j.tsf.2017.08.033.
- Knyazeva A.G., Shanin S.A. Modeling of evolution of growing coating composition // Acta Mechanica. – 2016. – Vol. 227, iss. 1. – P. 75–104. – doi: 10.1007/s0070.
- Физические величины: справочник / под ред. И.С. Григорьева, Е.З. Мейлихова. – М.: Энергоатомиздат, 1991. – 1232 с.
- Термодинамические свойства неорганических веществ: справочник / У.Д. Верятин, В.П. Маширев, Н.Г. Рябцев, В.И. Тарасов, Б.Д. Рогозкин, И.В. Коробов; под общ. ред. А.П. Зефирова. – М.: Атомиздат, 1965. – 460 с.
- Карапетьянц М.Х. Химическая термодинамика. – М.: Химия, 1975. – 584 с.
Supplementary files
