The classifier of engineering processes of geokhod elements production
- Authors: Lasukov A.A1, Gromyko P.S1
-
Affiliations:
- Yurga Institute of Technology, TPU Affiliate
- Issue: No 3 (2015)
- Pages: 23-30
- Section: TECHNOLOGY
- URL: https://bakhtiniada.ru/1994-6309/article/view/302166
- DOI: https://doi.org/10.17212/1994-6309-2015-3-23-30
- ID: 302166
Cite item
Full Text
Abstract
The present day mechanical engineering is distinguished by intense introduction of new technical solutions, adoption of science-consuming technologies, and constantly changing situation on the market. In these conditions flexibility, mobility and universality are core standards of the production process. The conditions necessitate both quality characteristics of the products to be improved regularly and manufactured articles to be substituted frequently by the new ones. Therefore, preproduction engineering is to be subjected to considerable changes. Up-to-date facilities of design automation make it reasonable to use a modular approach to the design process, when a product is made up of structural modules - uniform fabricated elements. The range of structural modules is far smaller than that of the products they can be used to manufacture. A main-line direction in classifier development is to describe a wide range of structural modules. The paper provides consideration of problems of preproduction engineering improvement, when a single-part or small-scale production of a new product (geokhod is taken as an example) is developed. The structure of products is analyzed; the latter have been arranged in groups according to structural and technological characteristics, as the consequence, the graph of complex product machining is developed with regard to particular structural characteristics. Code numbers are given to directions along the particular branches; afterwards these code numbers are used to form a code of a particular product. The process flow of the product under consideration is developed via selecting operations to treat plain surfaces (this product has them) from the flow, made for a standard product. The presented classifier makes the basis to improve efficiency of preproduction engineering, to widen the system of material and technical resources for the production process, and to further development of reference data and general improvement of production culture.
About the authors
A. A Lasukov
Yurga Institute of Technology, TPU Affiliate
Email: lasukow@rambler.ru
26, Leningradskaya st., Yurga, 652055, Russian Federation
P. S Gromyko
Yurga Institute of Technology, TPU Affiliate
Email: pasha.9.3@mail.ru
26, Leningradskaya st., Yurga, 652055, Russian Federation
References
- Григорьев М.Н., Уваров С.А. Логистика. Базовый курс. - М.: Юрайт, 2011. - 782 с. - ISBN: 978-5-9916-0755-1.
- Смаковский М.С. Современные технологические возможности повышения рентабельности производства судового машиностроения на примере механообрабатывающего участка ОАО «АРМАЛИТ-1» // Морской вестник. - 2012. - № 2. - С. 39-42.
- Аксенов В.В., Вальтер А.В. Специфика геохода как предмета производства // Научное обозрение. - 2014. - № 8-3. - С. 945-949.
- Технологические процессы в машиностроении / А.Г. Схиртладзе, С.И. Богодухов, Р.М. Сулейманов, Е.В. Бондаренко, А.Д. Проскурин. - М.: Машиностроение, 2009. - 640 с.
- Complexity in engineering design and manufacturing / W. ElMaraghy, H. ElMaraghy, T. Tomiyama, L. Monostori // CIRP Annals - Manufacturing Technology. - 2012. - Vol. 61, iss. 2. - Р. 793-814. - doi: 10.1016/j.cirp.2012.05.001.
- Wahab M.I.M., Stoyan S.J. A dynamic approach to measure machine and routing flexibilities of manufacturing systems // International Journal of Production Economics. - 2008. - Vol. 113, iss. 2. - Р. 895-913. - doi: 10.1016/j.ijpe.2007.12.001.
- Митрофанов С.П. Групповая технология машиностроительного производства. В 2 т. Т. 1. - 3-е изд., перераб. и доп. - Л.: Машиностроение, 1983. - 403 с.
- Митрофанов С.П. Групповая технология машиностроительного производства. В 2 т. Т. 2. - 3-е изд., перераб. и доп. - Л.: Машиностроение, 1983. - 375 с.
- Gallagher C.C., Knight W.A. Group technology, production methods in manufacturing. - Harlow, United Kingdom: Ellis Horwood, 1986. - 190 p. - ISBN-10: 0745800467. - ISBN-13: 9780745800462.
- Uddin M.K., Shanker K. Grouping of parts and machines in presence of alternative process routes by genetic algorithm // International Journal of Production Economics. - 2002. - Vol. 76, iss. 3. - Р. 219-228. - doi: 10.1016/S0925-5273(01)00164-5.
- A system based on machined volumes to reduce the number of route sheets in process planning / J. Ciurana, M.L. Garcia-Romeu, R. Castro, M. Alberti // Computers in Industry. - 2003. - Vol. 51 iss. 1. - Р. 41-50. - doi: 10.1016/S0166-3615(03)00024-1.
- Ласуков А.А., Навроцкий С.С. Системный классификатор маршрутных технологических процессов изготовления деталей типа «Вал» в условиях ООО «Юргинский машзавод» // Перспективы развития и безопасность автотранспортного комплекса: материалы III Международной научно-практической конференции, г. Новокузнецк, 28-30 ноября 2013 г. - Новокузнецк: филиал КузГТУ в г. Новокузнецке, 2013. - С. 348-351.
- Resource-efficient workflow scheduling in clouds / Y.C. Lee, H. Han, A.Y. Zomaya, M. Yousif // Knowledge-Based Systems. - 2015. - Vol. 80. - P. 153-162. - doi: 10.1016/j.knosys.2015.02.012.
- Боярский В.Г., Сихимбаев М.Р., Шеров К.Т. Переналаживаемая технологическая оснастка для групповой обработки // Фундаментальные исследования. - 2011. - № 12-3. - С. 542-547.
- Аксенов В.В., Вальтер А.В., Бегляков В.Ю. Обеспечение геометрической точности оболочки при сборке секций геохода // Обработка металлов (технология, оборудование, инструменты). - 2014. - № 4 (65). - С. 19-28.
- Андриченко А.С. «Вертикаль» - новое поколение технологических САПР: объектный подход // САПР и графика. - 2005. - № 6. - С. 8-10.
Supplementary files
