Structure and Phase Composition of Ni–Al–Cr Alloy Alloyed by Rhenium and Lanthanum
- Authors: Nikonenko E.L.1,2, Popova N.A.1, Dement T.V.1, Koneva N.A.1
-
Affiliations:
- Tomsk State University of Architecture and Building
- National Research Tomsk Polytechnic University
- Issue: Vol 60, No 2 (2017)
- Pages: 231-235
- Section: Article
- URL: https://bakhtiniada.ru/1064-8887/article/view/237940
- DOI: https://doi.org/10.1007/s11182-017-1066-y
- ID: 237940
Cite item
Abstract
The paper presents the transmission and the scanning electron microscope investigations of the phase composition and fine structure of Ni–Al–Cr-based alloy alloyed by rhenium and lanthanum. The alloy is prepared by the directional crystallization technique and then subjected to 1150°С annealing during 1 hour. It is shown that γ- and γ′-phases are major and have a face-centered cubic crystal system. Solid solutions of γ- and γ′-phase have a disordered and an ordered atom arrangement, respectively. The latter has L12 superstructure. It is found that rhenium and lanthanum alloying leads to the structural modification of γ′-phase quasi-cuboids. Not dissolving in major phases, rhenium and lanthanum are phase-formation elements and form σ-phase. The phase composition and morphology of these phases are studied and described.
Keywords
About the authors
E. L. Nikonenko
Tomsk State University of Architecture and Building; National Research Tomsk Polytechnic University
Author for correspondence.
Email: vilatomsk@mail.ru
Russian Federation, Tomsk; Tomsk
N. A. Popova
Tomsk State University of Architecture and Building
Email: vilatomsk@mail.ru
Russian Federation, Tomsk
T. V. Dement
Tomsk State University of Architecture and Building
Email: vilatomsk@mail.ru
Russian Federation, Tomsk
N. A. Koneva
Tomsk State University of Architecture and Building
Email: vilatomsk@mail.ru
Russian Federation, Tomsk
Supplementary files
