电邮这篇文章 Strength Properties of Aluminum-Oxide Ceramics Prepared by the Additive Manufacturing Method under Shock-Wave Loading
- 作者: Promakhov V.V.1, Savinykh A.S.1,2, Dubkova Y.A.1, Schulz N.A.1, Grunt N.V.1, Razorenov S.V.1,2
-
隶属关系:
- National Research Tomsk State University
- Institute of Problems of Chemical Physics
- 期: 卷 44, 编号 10 (2018)
- 页面: 898-901
- 栏目: Article
- URL: https://bakhtiniada.ru/1063-7850/article/view/207979
- DOI: https://doi.org/10.1134/S1063785018100127
- ID: 207979
如何引用文章
开放存取
##reader.subscriptionAccessGranted##
订阅存取
详细
Aluminum-oxide ceramic samples have been prepared by additive manufacturing with subsequent sintering. The Hugoniot elastic limit and spall strength of the ceramics are determined by analyzing the full wave profiles of the samples recorded using a laser interferometer upon their shock compression with amplitudes of 6.8 and 13.8 GPa.
作者简介
V. Promakhov
National Research Tomsk State University
编辑信件的主要联系方式.
Email: vvpromakhov@mail.ru
俄罗斯联邦, Tomsk, 634050
A. Savinykh
National Research Tomsk State University; Institute of Problems of Chemical Physics
Email: vvpromakhov@mail.ru
俄罗斯联邦, Tomsk, 634050; Chernogolovka, Moscow oblast, 142432
Ya. Dubkova
National Research Tomsk State University
Email: vvpromakhov@mail.ru
俄罗斯联邦, Tomsk, 634050
N. Schulz
National Research Tomsk State University
Email: vvpromakhov@mail.ru
俄罗斯联邦, Tomsk, 634050
N. Grunt
National Research Tomsk State University
Email: vvpromakhov@mail.ru
俄罗斯联邦, Tomsk, 634050
S. Razorenov
National Research Tomsk State University; Institute of Problems of Chemical Physics
Email: vvpromakhov@mail.ru
俄罗斯联邦, Tomsk, 634050; Chernogolovka, Moscow oblast, 142432
补充文件
