Enviar artigo por via de e-mail Strength Properties of Aluminum-Oxide Ceramics Prepared by the Additive Manufacturing Method under Shock-Wave Loading
- Autores: Promakhov V.V.1, Savinykh A.S.1,2, Dubkova Y.A.1, Schulz N.A.1, Grunt N.V.1, Razorenov S.V.1,2
-
Afiliações:
- National Research Tomsk State University
- Institute of Problems of Chemical Physics
- Edição: Volume 44, Nº 10 (2018)
- Páginas: 898-901
- Seção: Article
- URL: https://bakhtiniada.ru/1063-7850/article/view/207979
- DOI: https://doi.org/10.1134/S1063785018100127
- ID: 207979
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
Aluminum-oxide ceramic samples have been prepared by additive manufacturing with subsequent sintering. The Hugoniot elastic limit and spall strength of the ceramics are determined by analyzing the full wave profiles of the samples recorded using a laser interferometer upon their shock compression with amplitudes of 6.8 and 13.8 GPa.
Sobre autores
V. Promakhov
National Research Tomsk State University
Autor responsável pela correspondência
Email: vvpromakhov@mail.ru
Rússia, Tomsk, 634050
A. Savinykh
National Research Tomsk State University; Institute of Problems of Chemical Physics
Email: vvpromakhov@mail.ru
Rússia, Tomsk, 634050; Chernogolovka, Moscow oblast, 142432
Ya. Dubkova
National Research Tomsk State University
Email: vvpromakhov@mail.ru
Rússia, Tomsk, 634050
N. Schulz
National Research Tomsk State University
Email: vvpromakhov@mail.ru
Rússia, Tomsk, 634050
N. Grunt
National Research Tomsk State University
Email: vvpromakhov@mail.ru
Rússia, Tomsk, 634050
S. Razorenov
National Research Tomsk State University; Institute of Problems of Chemical Physics
Email: vvpromakhov@mail.ru
Rússia, Tomsk, 634050; Chernogolovka, Moscow oblast, 142432
Arquivos suplementares
