Enviar artigo por via de e-mail Destruction of ABS Polymer in the Glass State under Dynamic Stressing
- Autores: Atroshenko S.A.1,2, Chevrychkina A.A.1,2, Evstifeev A.D.1, Volkov G.A.1,2
-
Afiliações:
- Institute for Problems of Mechanical Engineering, Russian Academy of Sciences
- St. Petersburg State University
- Edição: Volume 61, Nº 11 (2019)
- Páginas: 2075-2082
- Seção: Mechanical Properties, Physics of Strength, and Plasticity
- URL: https://bakhtiniada.ru/1063-7834/article/view/206552
- DOI: https://doi.org/10.1134/S1063783419110052
- ID: 206552
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
This article describes the experimental and theoretical studies of the mechanisms of failure of ABS polymer in the range of strain rates of 10–4–103 s–1 at different temperatures of testing (from an ambient temperature of 23 to 100°C). The alteration of the type of failure as a function of the strain rate and temperature is analyzed. Based on the structure–time approach, a model of the temperature–rate superposition is proposed.
Palavras-chave
Sobre autores
S. Atroshenko
Institute for Problems of Mechanical Engineering, Russian Academy of Sciences; St. Petersburg State University
Email: Anastasiia.Che@gmail.com
Rússia, St. Petersburg; St. Petersburg
A. Chevrychkina
Institute for Problems of Mechanical Engineering, Russian Academy of Sciences; St. Petersburg State University
Autor responsável pela correspondência
Email: Anastasiia.Che@gmail.com
Rússia, St. Petersburg; St. Petersburg
A. Evstifeev
Institute for Problems of Mechanical Engineering, Russian Academy of Sciences
Email: Anastasiia.Che@gmail.com
Rússia, St. Petersburg
G. Volkov
Institute for Problems of Mechanical Engineering, Russian Academy of Sciences; St. Petersburg State University
Email: Anastasiia.Che@gmail.com
Rússia, St. Petersburg; St. Petersburg
Arquivos suplementares
