Relationship of Mg2Si Phase-Content and Thermal Expansion Properties of Mg–Si and Mg–Si–Ca Alloys
- Авторлар: Wu S.1, Guo T.1, An P.1, Zhou X.1, Lü S.1
-
Мекемелер:
- State Key Lab of Materials Processing and Die & Mould Technology, Huazhong University of Science and Technology
- Шығарылым: Том 61, № 12 (2019)
- Беттер: 2487-2492
- Бөлім: Polymers
- URL: https://bakhtiniada.ru/1063-7834/article/view/207142
- DOI: https://doi.org/10.1134/S1063783419120588
- ID: 207142
Дәйексөз келтіру
Аннотация
The thermal expansion properties of Mg–xSi (x = 1, 1.38, 2, 3, and 4 wt %) binary alloys and Mg–4Si–yCa (y = 0.2, 0.4, 0.6, 0.8, and 1.0 wt %) alloys over a temperature range of 25–300°C were systematically studied. The results show that the Mg–Si binary alloys consist of α-Mg and Mg2Si phases. The volume fraction of Mg2Si phase increases with the increase of Si content in Mg–Si alloys, from 30.72 to 46.50% when Si content increases from 1 to 4 wt % Si. The coefficient of thermal expansion (CTE) of Mg–xSi binary alloys decreases with the increase of Mg2Si volume fraction. The addition of Ca element to Mg–4Si alloys has an obvious modification effect on the Mg2Si phase. When the Ca content increases constantly, the CTE of the Mg–4Si–Ca alloys increases at first, then it continues to decline. The mechanism is mainly related to the formation of the CaMgSi phase.
Негізгі сөздер
Авторлар туралы
S. Wu
State Key Lab of Materials Processing and Die & Mould Technology, Huazhong University of Science and Technology
Хат алмасуға жауапты Автор.
Email: ssw636@hust.edu.cn
ҚХР, Wuhan, 430074
T. Guo
State Key Lab of Materials Processing and Die & Mould Technology, Huazhong University of Science and Technology
Email: ssw636@hust.edu.cn
ҚХР, Wuhan, 430074
P. An
State Key Lab of Materials Processing and Die & Mould Technology, Huazhong University of Science and Technology
Email: ssw636@hust.edu.cn
ҚХР, Wuhan, 430074
X. Zhou
State Key Lab of Materials Processing and Die & Mould Technology, Huazhong University of Science and Technology
Email: ssw636@hust.edu.cn
ҚХР, Wuhan, 430074
S. Lü
State Key Lab of Materials Processing and Die & Mould Technology, Huazhong University of Science and Technology
Email: ssw636@hust.edu.cn
ҚХР, Wuhan, 430074
Қосымша файлдар
