Email this article Mechanisms of Plastic Deformation in Stainless Steel under Conditions of High-Speed Penetration of Compact Strikers
- Authors: Atroshenko S.A.1,2, Grigor’ev A.Y.3, Savenkov G.G.3
-
Affiliations:
- Institute for Problems in Mechanical Engineering, Russian Academy of Sciences
- St. Petersburg State University
- St. Petersburg State Institute of Technology
- Issue: Vol 61, No 10 (2019)
- Pages: 1690-1694
- Section: Metals
- URL: https://bakhtiniada.ru/1063-7834/article/view/206205
- DOI: https://doi.org/10.1134/S106378341910007X
- ID: 206205
Cite item
Open Access
Access granted
Subscription Access
Abstract
The results of study of austenite stainless steel 08Kh18N10T under the conditions of high-speed penetration with the velocities from 1.5 to 2.0 km/s are presented. It is shown that in the target the three penetration zones are observed at penetrations that are different by the mechanisms of plastic deformation and destruction.
About the authors
S. A. Atroshenko
Institute for Problems in Mechanical Engineering, Russian Academy of Sciences; St. Petersburg State University
Author for correspondence.
Email: satroshe@mail.ru
Russian Federation, St. Petersburg; St. Petersburg
A. Yu. Grigor’ev
St. Petersburg State Institute of Technology
Email: satroshe@mail.ru
Russian Federation, St. Petersburg
G. G. Savenkov
St. Petersburg State Institute of Technology
Email: satroshe@mail.ru
Russian Federation, St. Petersburg
Supplementary files
