SHS production of heat-shield materials from minerals and residual products: Influence of preliminary mechanochemical treatment and modifying agents


Citar

Texto integral

Acesso aberto Acesso aberto
Acesso é fechado Acesso está concedido
Acesso é fechado Somente assinantes

Resumo

We report on preparation of porous refractory ceramics from natural quartz sand and industrial wastes (fly ash and wastes of concrete production) by SHS in a mode of thermal explosion with preliminary mechanochemical treatment of charge mixtures in the presence of carbonaceous modifying agents (activated carbon and polystyrene). The Al2O3–AlN-based composite synthesized in optimized conditions exhibited low thermal conductivity [0.185–0.228 W/(m K)], finely porous structure, and high compression strength (30–96 MPa).

Sobre autores

Z. Mansurov

Al-Farabi Kazakh National University; Institute of Combustion Problems

Autor responsável pela correspondência
Email: Z.Mansurov@kaznu.kz
Cazaquistão, 71 Al-Farabi av., Almaty, 050040; 172 Bogenbai Batyr str., Almaty, 050012

N. Mofa

Al-Farabi Kazakh National University; Institute of Combustion Problems

Email: Z.Mansurov@kaznu.kz
Cazaquistão, 71 Al-Farabi av., Almaty, 050040; 172 Bogenbai Batyr str., Almaty, 050012

B. Sadykov

Al-Farabi Kazakh National University; Institute of Combustion Problems

Email: Z.Mansurov@kaznu.kz
Cazaquistão, 71 Al-Farabi av., Almaty, 050040; 172 Bogenbai Batyr str., Almaty, 050012

Zh. Sabaev

Institute of Combustion Problems

Email: Z.Mansurov@kaznu.kz
Cazaquistão, 172 Bogenbai Batyr str., Almaty, 050012

Arquivos suplementares

Arquivos suplementares
Ação
1. JATS XML

Declaração de direitos autorais © Allerton Press, Inc., 2016