Determination of Impurities in Magnesium Alloys by Inductively Coupled Plasma Mass Spectrometry
- Autores: Alekseev A.V.1, Yakimovich P.V.1
-
Afiliações:
- State Research Center of the Russian Federation – All-Russia Research Institute of Aviation Materials (VIAM)
- Edição: Volume 62, Nº 8 (2019)
- Páginas: 741-745
- Seção: Physicochemical Measurements
- URL: https://bakhtiniada.ru/0543-1972/article/view/246772
- DOI: https://doi.org/10.1007/s11018-019-01688-w
- ID: 246772
Citar
Resumo
The methods of determination of Be, Cu, Fe, Ni, Si, Ti, and Cd in certified standard samples of magnesium alloys by inductively coupled plasma mass spectrometry (ICP-MS) are discussed. The procedure for dissolving the sample and preparing it for analysis is given. To eliminate spectral interference, a collision-reaction cell was used. An internal standard is selected and the accuracy characteristics of the magnesium alloy analysis method are calculated. The accuracy of the results is confirmed by analyzing a certified standard sample of magnesium alloy.
Sobre autores
A. Alekseev
State Research Center of the Russian Federation – All-Russia Research Institute of Aviation Materials (VIAM)
Autor responsável pela correspondência
Email: kvark-87@mail.ru
Rússia, Moscow
P. Yakimovich
State Research Center of the Russian Federation – All-Russia Research Institute of Aviation Materials (VIAM)
Email: kvark-87@mail.ru
Rússia, Moscow
Arquivos suplementares
