Use of Machining to Increase the Recovery of Scandium from Refractory Silicate Raw Material

S. I. Stepanov; Kh. P’ei; A. V. Boyarintsev; V. G. Giganov; A. M. Chekmarev; M. M. Aung

doi:10.1134/S0040579518050275

Use of Machining to Increase the Recovery of Scandium from Refractory Silicate Raw Material

Authors: Stepanov S.I.¹, P’ei K.¹, Boyarintsev A.V.¹, Giganov V.G.¹, Chekmarev A.M.¹, Aung M.M.¹
Affiliations:
1. Mendeleev University of Chemical Technology of Russia
Issue: Vol 52, No 5 (2018)
Pages: 898-902
Section: Chemical-Metallurgical Processes of Deep Treatment of Ore, Technogenic, and Secondary Raw Materials
URL: https://bakhtiniada.ru/0040-5795/article/view/172685
DOI: https://doi.org/10.1134/S0040579518050275
ID: 172685

Cite item

Full Text

Open Access
Restricted Access

Access granted
Restricted Access

Subscription Access

Abstract

The effect of machining conditions on the scandium leaching effectiveness from the wastes of wet magnetic separation of iron–titanium magnetites in sulfuric acid solution has been studied. It has been shown that the degree of recovery of scandium into sulfuric acid solution linearly increases with an increase in the degree of amorphization of specimens of wastes of wet magnetic separation.