Use of Machining to Increase the Recovery of Scandium from Refractory Silicate Raw Material

S. I. Stepanov; Kh. P’ei; A. V. Boyarintsev; V. G. Giganov; A. M. Chekmarev; M. M. Aung

doi:10.1134/S0040579518050275

Use of Machining to Increase the Recovery of Scandium from Refractory Silicate Raw Material

Autores: Stepanov S.I.¹, P’ei K.¹, Boyarintsev A.V.¹, Giganov V.G.¹, Chekmarev A.M.¹, Aung M.M.¹
Afiliações:
1. Mendeleev University of Chemical Technology of Russia
Edição: Volume 52, Nº 5 (2018)
Páginas: 898-902
Seção: Chemical-Metallurgical Processes of Deep Treatment of Ore, Technogenic, and Secondary Raw Materials
URL: https://bakhtiniada.ru/0040-5795/article/view/172685
DOI: https://doi.org/10.1134/S0040579518050275
ID: 172685

Citar

Texto integral

Acesso aberto
Acesso é fechado

Acesso está concedido
Acesso é fechado

Somente assinantes

Resumo
Sobre autores
Bibliografia
Arquivos suplementares
Estatísticas

Resumo

The effect of machining conditions on the scandium leaching effectiveness from the wastes of wet magnetic separation of iron–titanium magnetites in sulfuric acid solution has been studied. It has been shown that the degree of recovery of scandium into sulfuric acid solution linearly increases with an increase in the degree of amorphization of specimens of wastes of wet magnetic separation.