High-temperature adsorption layers based on fluoridated polyimide and diatomite carrier


Citar

Texto integral

Acesso aberto Acesso aberto
Acesso é fechado Acesso está concedido
Acesso é fechado Somente assinantes

Resumo

A way of preparing separation layers by the pyrolysis of fluorinated polyimide obtained from 2,4,6-trimethyl-m-phenylenediamine (2,4,6-TMmPDA) and 2,2-bis(3′,4′-dicarboxyphenyl)hexafluoropropane (6FDA) applied onto a diatomite carrier is described. Thermogravimetry, elemental analysis, low-temperature nitrogen adsorption, high-resolution electron microscopy, and gas chromatography are used to study changes in the texture and chromatographic characteristics of these layers. It is found that changes in the structure and the effectivity of separation characteristic of the layers depend on the temperature of pyrolysis, which ranges from 250 to 1100°C. It is established that a layer of separation is formed at 250–350°C, and the order of elution of hydrocarbons is similar to their chromatographic behavior on such stationary phases as OV-101. Layers of amorphous carbon formed on the surfaces of individual particles on a diatomite surface at 500–700°C. These layers ensure highly stable and selective separation of permanent gases and hydrocarbons when they are present together.

Sobre autores

E. Yakovleva

Boreskov Institute of Catalysis; Novosibirsk State University

Autor responsável pela correspondência
Email: Yakovl@catalysis.ru
Rússia, Novosibirsk, 630090; Novosibirsk, 630090

I. Shundrina

Vorozhtsov Institute of Organic Chemistry

Email: Yakovl@catalysis.ru
Rússia, Novosibirsk, 630090

E. Gerasimov

Boreskov Institute of Catalysis; Novosibirsk State University

Email: Yakovl@catalysis.ru
Rússia, Novosibirsk, 630090; Novosibirsk, 630090

Arquivos suplementares

Arquivos suplementares
Ação
1. JATS XML

Declaração de direitos autorais © Pleiades Publishing, Ltd., 2017