Biodegradable Composites with Polyvinyl Chloride Polymer Phase and Lignocellulose Fillers
- Autores: Shkuro A.E.1, Glukhikh V.V.1, Kulazhenko J.M.1, Zakharov P.S.1
-
Afiliações:
- Ural State Forest Engineering University
- Edição: Volume 20, Nº 3 (2023)
- Páginas: 1-14
- Seção: Articles
- URL: https://bakhtiniada.ru/2307-0048/article/view/356679
- DOI: https://doi.org/10.15393/j2.art.2023.6923
- ID: 356679
Citar
Texto integral
Resumo
The way to solve the problem of waste disposal from the timber industry and agrarian complexes, as well as plastic waste from the production and consumption of marketable products is to develop compositions of new composite materials and to improve technologies for their processing. Therefore, biodegradable composites with polymer phases of synthetic and natural polymers and various lignocellulosic fillers are of great interest. In the present work, the issues of biodegradation of composites with polymeric phases of primary and recycled polyvinyl chloride (PVC) were considered. Wood flour, beech sawdust, oat husks, biomass of fallen leaves, hay from natural haylands were used as fillers. Samples of composites were obtained by rolling and hot pressing. The degree of the resulting composites biodegradation was determined by the amount of weight loss after seasoning in active (nondormant) soil. The maximum exposure time of the samples in the soil was 120 days. As a result of the study, it was The authors found that the use of a plasticizer (dibutyl phthalate) allows increasing the mass loss rate of unfilled polyvinyl chloride during its 120-day seasoning in the soil by more than three times. Introduction of lignocellulose fillers into the composition of PVC significantly increased its degree of decomposition in the soil. The highest degree of biodegradation in activated soil was demonstrated by samples of composites with fillers of non-wood origin. For samples of composites with a polymer phase of primary PVC and oat husk, the weight loss after seasoning in activated soil was 10.1 wt. %, with meadow grass hay – 14.5 wt. %; for a sample with a polymer phase of recycled PVC (waste from phased-out ceiling boards) – 24.6 wt. %. For the fillers used in the work, the contents of lignin, cellulose, hemicelluloses, and minerals were determined. Using the method of multivariate regression analysis, regularities were established for the influence of the component composition of lignocellulose filler on the degree of biodegradation of the component in the soil. It is shown that the content of hemicelluloses in the filler had the greatest effect on the biodegradation of composites with a polymer phase of primary PVC. At the same time, an increase in the content of lignin and cellulose in the filler resulted in a decrease in the degree of composite biodegradation. The influence of mineral substances in the composition of the composite on its degree of biodegradation was not revealed. For samples with a polymer phase of recycled PVC, the main factor determining the degree of biodegradation in the soil was the content of hemicelluloses in the filler. No statistically significant effect of lignin and cellulose content was found.
Palavras-chave
Sobre autores
Alexey Shkuro
Ural State Forest Engineering University
Autor responsável pela correspondência
Email: shkuroae@m.usfeu.ru
Viktor Glukhikh
Ural State Forest Engineering University
Email: gluhihvv@m.usfeu.ru
Julia Kulazhenko
Ural State Forest Engineering University
Email: kulazhenkoyuliya@mail.ru
Pavel Zakharov
Ural State Forest Engineering University
Email: zaharovps@m.usfeu.ru
Bibliografia
- Vihod A., Sanjay M. R., Suchart S., Jyotishkumar P. Review. Renewable and sustainable biobased materials: An assessment on biofibers, biofilms, biopolymers and biocomposites // Journal of Cleaner Production. 2020. Vol. 258. P. 1–27. doi: 10.1016/j.jclepro.2020.120978.
- Rodriguez L. J., Peças P., Carvalho H., Orrego C. E. A literature review on life cycle tools fostering holistic sustainability assessment: An application in biocomposite materials // Journal of Environmental Management. 2020. Vol. 262. 110308. doi: 10.1016/j.jenvman.2020.110308.
- Feng J., Li S., Peng R. Effects of fungal decay on properties of mechanical, chemical, and water absorption of wood plastic composites // Journal Appl. Polym. Sci. 2020. e50022. doi: 10.1002/app.50022.
- Matlin S. A., Mehta G., Hopf H. Material circularity and the role of the chemical sciences as a key enabler of a sustainable post-trash age // Sustainable Chemistry and Pharmacy. 2020. Vol. 7. 100312. doi: 10.1016/j.scp.2020.100312.
- Braghiroli F. L., Passarini L. Valorization of biomass residues from forest operations and wood manufacturing presents a wide range of sustainable and innovative possibilities // Current Forestry Reports. 2020. Vol. 6. P. 172–183. doi: 10.1007/s40725-020-00112-9.
- Tajeddin B., Momen R. F. The effect of wheat straw bleaching on some mechanical properties of wheat straw/LDPE biocomposites // Journal of Food and Bioprocess Engineering. 2020. Vol. 3, no. 1. P. 23–28. doi: 10.22059/JFABE.2020.75620.
- Salmers D. Polyvinylchloride. Saint Petersburg: Profession, 2007. 736 p. (In Russ.)
- Vurasko A. V., Minakova A. R., Zhvirblyte A. K., Blinova I. A. Chemistry of plant raw materials: a textbook. Ekaterinburg: UGLTU, 2013. 90 p. (In Russ.)
- Luzi F., Yang W., Ma P., Torre L., Puglia D. Lignin-based materials with antioxidant and antimicrobial properties // Elsevier. 2021. P. 291–326. doi: 10.1016/B978-0-12-820303-3.00003-5.
- Zakharov P. S., Shkuro A. E., Glukhikh V. V., Kulazhenko Y. M. Effect of microcrystalline cellulose content in mixture with kraft lignin on properties of wood-polymer composites // AIP Conference Proceedings. 2022. Vol. 2632. 020004. doi: 10.1063/5.0098919.
Arquivos suplementares


