DETERMINATION OF THE STRIPPING STRENGTH OF MONOLITHIC SLABS AND BEAMS

封面

如何引用文章

全文:

详细

Checking the strength of concrete monolithic structures in the stage of erection is a necessary condition for the possibility of further normal operation of buildings and structures. The purpose of the work is to specify the timing of the decoupling of slabs and beams taking into account the real strength set. In this article, an engineering method for determining the form-fitting strength of concrete of monolithic bending elements without a prestressing reinforcement is considered. The method for determining the form-fitting strength is based on the equality of external and internal forces in the normal design section in the stage of failure when the strength of concrete is depleted. This method is applicable to linear elements and constructions. Based on the results of the work, a formula has been obtained for assigning the minimum concrete strength at decompression and the coefficient k , which can be used to easily and accurately determine the stripping strength for slabs and beams. The graphs of the dependence of the coefficient k are given for determining the formwork strength when using working reinforcements A400 and A500C, on the thickness of the plate under the action of a single moment. The proposed method for determining the form-fitting strength makes it possible to designate the size of the form-fitting strength for slabs and beams and to specify the timing of the decoupling of structures, taking into account the actual strength set.

作者简介

Vitaliy Kuznetsov

Moscow State University of Civil Engineering (National Research University) (MGSU)

编辑信件的主要联系方式.
Email: vitaly.ggh2014@yandex.ru

Сandidate of Technical Sciences, Associate Professor of the Department of Architectural and Construction Design (TSA), Moscow State University of Civil Engineering (National Research University). Research interests: monolithic and prefabricated structures with the use of high-strength fittings with clutch and without adhesion to concrete in the modern construction of buildings and structures

26 Yaroslavskoye Shosse, Moscow, 129337, Russian Federation

Yulia Shaposhnikova

Moscow State University of Civil Engineering (National Research University) (MGSU)

Email: yuliatalyzova@yandex.ru

Сandidate of Technical Sciences, Associate Professor of the Department of Reinforced Concrete and Stone Structures (ZHBK), Moscow State University of Civil Engineering (National Research University). Research interests: monolithic construction, prestressed constructions without adhesion and with adhesion to concrete, modern building structures, inspection of technical condition and strengthening of building structures

26 Yaroslavskoye Shosse, Moscow, 129337, Russian Federation

参考

  1. GOST 18105-2010. Betony. Pravila kontrolya i otsenki prochnosti [GOST 18105-2010. Concretes. Rules for monitoring and evaluation of strength]. Moscow: Standartinform, 2013, 20.
  2. Kuz'minykh O.V. (2015). Neobkhodimost' ukhoda i nablyudeniya za betonom v period tverdeniya s 29-kh i posleduyushchikh sutok [The need for care and observation of concrete during the hardening from the 29th and the following days]. Nauka YuURGU. Materialy 67-i nauchnoi konf. [Science of SUSU. Materials of the 67th scientific conference], April 14–17. Chelyabinsk, 1361–1364. (In Russ.)
  3. Pisarev S.V., Astakhov N.N. (2014). Otsenka tekhnicheskogo sostoyaniya konstruktsii zdanii pri tipovykh narusheniyakh tekhnologii stroitel'stva [Assessment of the technical condition of buildings in typical violations of construction technology]. Prioritetnye nauchnye napravleniya: ot teorii k praktike [Priority research areas: from theory to practice], (12), 142–148. (In Russ.)
  4. Rapoport P.B., Rapoport N.V., Polyansky V.G., Sokolova E.R., Garibov R.B., Kochetkov A.V., Yankovsky L.V. (2012). Analiz sroka sluzhby sovremennykh tsementnykh betonov [Analysis of the service life of modern cement concrete]. Sovremennye problemy nauki i obrazovaniya [Modern problems of science and education], (4), 92. (In Russ.)
  5. Gnyrya A.I., Boyarintsev A.P., Korobkov S.V., Abzaev Yu.A., Mokshin D.I., Gauss K.S., Bibikov I.A., Titov M.M. (2017). Obosnovanie metoda temperaturno-prochnostnogo kontrolya v tekhnologii proizvodstva betonnykh rabot pri vozvedenii monolitnykh zhelezobetonnykh konstruktsii [Justification of methods for temperature and strength monitoring of in-situ reinforced concrete construction]. Vestnik Tomskogo gosudarstvennogo arkhitekturno-stroitel'nogo universiteta [Tomsk State University of Architecture and Building], 3(62), 161–170. (In Russ.)
  6. Yudina A.F. (2012). Dostoinstva monolitnogo stroitel'stva i nekotorye problemy ego sovershenstvovaniya [Advantages of monolithic building and some problems of its perfection]. Vestnik grazhdanskikh inzhenerov [University of Architecture and Civil Engineering], (1), 154–156. (In Russ.)
  7. Imaykin D.G., Ibragimov R.A. (2017). Sovershenstvovanie tekhnologii betonirovaniya monolitnykh konstruktsii [Perfection of technology of concreting of monolithic constructions]. Izvestiya Kazanskogo gosudarstvennogo arkhitekturno-stroitel'nogo universiteta [Kazan State University of Architecture and Engineering], 1(39), 250–256. (In Russ.)
  8. Salov A.S., Chernova A.R., Kuz'mina A.Yu. (2015). Problemy kontrolya kachestva betona pri monolitnom stroitel'stve [Problems of quality control of concrete in monolithic construction]. Aktual'nye problemy tekhnicheskikh, estestvennykh i gumanitarnykh nauk. Materialy mezhdunarodnoi nauchno-tekhnicheskoi konferentsii [Actual problems of technical, natural and humanities. Materials of the international scientific and technical conference]. Ufa, 71–74. (In Russ.)
  9. Pak A.A. (2015). K voprosu kontrolya kachestva stroitel'nykh materialov i izdelii iz betona nauka i obrazovanie v Arkticheskom regione [On the issue of quality control of building materials and articles from concrete science and education in the Arctic region]. Nauka i obrazovanie v Arkticheskom regione. Materialy Mezhdunarodnoi nauchnoprakticheskoi konferentsii [Science and Education in the Arctic Region. Proceedings of the International Scientific and Practical Conference]. Murmansk, 149–156. (In Russ.)
  10. Svintsov A.P., Nikolenko Yu.V., Kurilkin V.V. (2015). Teplovaya obrabotka betonnoi smesi v monolitnykh konstruktsiyakh [Heat treatment of concrete mix in cast-in-situ structures]. Promyshlennoe i grazhdanskoe stroitel'stvo [Industrial and civil construction], (1), 15–19. (In Russ.)
  11. Khamkhoeva Z.M., Dzangieva A.R. (2016). Zavisimost' kachestva betona ot sposoba ukladki betonnoi smesi [Dependence of the quality of concrete on the method of laying concrete mixes]. Uspekhi sovremennoi nauki i obrazovaniya [Progress in Modern Science and Education], 2(3), 48–52. (In Russ.)
  12. Golovin N.G., Bedov A.I., Silant'ev A.S., Voronov A.A. (2015). Stesnennaya usadka betona kak faktor razvitiya defektov v monolitnykh perekrytiyakh mnogoetazhnykh zdanii [Constrained concrete shrinkage as a factor of defect development in cast-in-place slabs of multistory buildings]. Promyshlennoe i grazhdanskoe stroitel'stvo [Industrial and Civil Construction], (1), 46–50. (In Russ.)
  13. Eryshev V.A., Latysheva E.V., Bondarenko A.S. (2012). Usadochnye deformatsii v betonnykh i zhelezobetonnykh elementakh [Shrink deformations in concrete and reinforced concrete elements]. Izvestiya Kazanskogo gosudarstvennogo arkhitekturno-stroitel'nogo universiteta, (4), 97–101. (In Russ.)
  14. SP 52-103-2007 (2007). Zhelezobetonnye monolitnye konstrukcii zdanij. [Concrete monolithic construction of buildings]. Moscow, 2007. (In Russ.)
  15. Belentsov Yu.A., Roshupkin A.A. (2014). Otsenka neobkhodimosti ucheta koeffitsienta variatsii pri priemke betona monolitnykh konstruktsii [Evaluation of the need to take into account the coefficient of variation in the acceptance of concrete monolithic structures]. Vestnik Belgorodskogo gosudarstvennogo tekhnologicheskogo universiteta im. V.G. Shukhova [Bulletin of BSTU named after V.G. Shukhov], (6), 70–73. (In Russ.)
  16. Butenko S.A., Nefedov A.T. (2016). Fakticheskii klass betona monolitnykh konstruktsii [Actual class of concrete monolithic constructions]. Traditsii i innovatsii v stroitel'stve i arkhitekture. Sbornik statei [Traditions and innovations in construction and architecture. Collection of articles]. Ed. by M.I. Bal'zannikova, K.S. Galitskova, A.K. Strelkova. Samara: SGASU Publ., 114–117. (In Russ.)

补充文件

附件文件
动作
1. JATS XML

Согласие на обработку персональных данных с помощью сервиса «Яндекс.Метрика»

1. Я (далее – «Пользователь» или «Субъект персональных данных»), осуществляя использование сайта https://journals.rcsi.science/ (далее – «Сайт»), подтверждая свою полную дееспособность даю согласие на обработку персональных данных с использованием средств автоматизации Оператору - федеральному государственному бюджетному учреждению «Российский центр научной информации» (РЦНИ), далее – «Оператор», расположенному по адресу: 119991, г. Москва, Ленинский просп., д.32А, со следующими условиями.

2. Категории обрабатываемых данных: файлы «cookies» (куки-файлы). Файлы «cookie» – это небольшой текстовый файл, который веб-сервер может хранить в браузере Пользователя. Данные файлы веб-сервер загружает на устройство Пользователя при посещении им Сайта. При каждом следующем посещении Пользователем Сайта «cookie» файлы отправляются на Сайт Оператора. Данные файлы позволяют Сайту распознавать устройство Пользователя. Содержимое такого файла может как относиться, так и не относиться к персональным данным, в зависимости от того, содержит ли такой файл персональные данные или содержит обезличенные технические данные.

3. Цель обработки персональных данных: анализ пользовательской активности с помощью сервиса «Яндекс.Метрика».

4. Категории субъектов персональных данных: все Пользователи Сайта, которые дали согласие на обработку файлов «cookie».

5. Способы обработки: сбор, запись, систематизация, накопление, хранение, уточнение (обновление, изменение), извлечение, использование, передача (доступ, предоставление), блокирование, удаление, уничтожение персональных данных.

6. Срок обработки и хранения: до получения от Субъекта персональных данных требования о прекращении обработки/отзыва согласия.

7. Способ отзыва: заявление об отзыве в письменном виде путём его направления на адрес электронной почты Оператора: info@rcsi.science или путем письменного обращения по юридическому адресу: 119991, г. Москва, Ленинский просп., д.32А

8. Субъект персональных данных вправе запретить своему оборудованию прием этих данных или ограничить прием этих данных. При отказе от получения таких данных или при ограничении приема данных некоторые функции Сайта могут работать некорректно. Субъект персональных данных обязуется сам настроить свое оборудование таким способом, чтобы оно обеспечивало адекватный его желаниям режим работы и уровень защиты данных файлов «cookie», Оператор не предоставляет технологических и правовых консультаций на темы подобного характера.

9. Порядок уничтожения персональных данных при достижении цели их обработки или при наступлении иных законных оснований определяется Оператором в соответствии с законодательством Российской Федерации.

10. Я согласен/согласна квалифицировать в качестве своей простой электронной подписи под настоящим Согласием и под Политикой обработки персональных данных выполнение мною следующего действия на сайте: https://journals.rcsi.science/ нажатие мною на интерфейсе с текстом: «Сайт использует сервис «Яндекс.Метрика» (который использует файлы «cookie») на элемент с текстом «Принять и продолжить».