| Выпуск |
Раздел |
Название |
Файл |
| Том 56, № 5 (2016) |
Refractories in Heating Units |
Redesign of Refractories for the Pouring Chamber of the Tundish of a Continuous Section Caster |
|
| Том 56, № 5 (2016) |
Article |
Use of Plasma Deposition to Make Bulk Corundum Products with Channel Porosity |
|
| Том 56, № 5 (2016) |
Raw Materials |
Staurolite Shales for Mullite-Silica Carbidized Heat Insulation |
|
| Том 56, № 5 (2016) |
Production and Equipment |
Strengthening the Blades of a High-Speed Mixer on the Basis of Wear Curves |
|
| Том 56, № 5 (2016) |
Article |
Russian-Made Steel-Casting Systems and Refractory Production Facilities at the NPP “Vulkan-TM”1 |
|
| Том 56, № 5 (2016) |
Article |
Energy Conservation Technologies in the Use of a Power-Driven Covering Apparatus in Industry |
|
| Том 56, № 5 (2016) |
Heat Engineering |
Aspects of the Thermal Performance of a Cupola with a Closed Top for Remelting Mineral-Bearing Raw Materials |
|
| Том 56, № 5 (2016) |
Article |
Electric Modular-Trigger Kiln with an Energy Recuperation System for Firing Vermiculte Concentrates |
|
| Том 56, № 5 (2016) |
Scientific Research and Development |
Research in the Area of Preparing Materials Based on Fuzed Quartz HCBS. Part 7. Study of Centrifugally Molded Refractory Sintering and Cristobalitization1 |
|
| Том 56, № 5 (2016) |
Article |
The Use of Refractories in the Lining of Rotary Cement Kilns1 |
|
| Том 56, № 5 (2016) |
Article |
Preparation of Porous Periclase Ceramic |
|
| Том 56, № 5 (2016) |
Article |
Corrosion-Erosion-Resistant Carbon-Containing Refractories for Nonferrous Metallurgy Units |
|
| Том 56, № 5 (2016) |
Article |
Slag Corrosion and Penetration Behaviors of MgAl2O4 and Al2O3 Based Refractories |
|
| Том 56, № 5 (2016) |
Article |
Powders Mixtures Based on Ammonium Pyrophosphate and Calcium Carbonate for Preparation of Biocompatible Porous Ceramic in the CaO–P2O5 System |
|
| Том 56, № 5 (2016) |
Article |
Study of Acid-Resistant Material Properties Based on Noferrous Metallurgy Waste Using Regresssion Analysis |
|
| Том 56, № 5 (2016) |
Article |
Effect of Air-Abrasive Treatment on Oxide-Carbide Ceramic Object Operating Properties |
|
| Том 56, № 5 (2016) |
Article |
Study of Thermal Decomposition of Natural and Synthetic Magnesium Compounds |
|
| Том 56, № 5 (2016) |
Article |
Study of a Hot-Casting Technology to Form a Permeable Thin-Walled High-Porosity Ceramic |
|
| Том 56, № 5 (2016) |
Article |
Study of HCBS Preparation Based on Magnesium Aluminosilicate Composition Glass |
|
| Том 56, № 5 (2016) |
Article |
Making Hollow Cylindrical Products of High-Porosity Silicon Nitride by the Centrifugal Forming of Granules of a Thixotropic Thermoplastic Slip |
|
| Том 56, № 5 (2016) |
Article |
Research in the Field of Preparing Molded and Unmolded Refractories Based on High-Alumina HCBS. Part 2. Properties of Starting Components and Castings Based on Composite Composition HCBS. Study of the Initial Stage of Sintering and Mullitization1 |
|
| Том 56, № 5 (2016) |
Article |
Titanium Carbide Synthesis in the Presence of Iodine |
|
| Том 56, № 5 (2016) |
Article |
Stress Inhomogeneity in Oxide-Carbide Ceramic Surface with Developed Relief Under Action of Heat Flow |
|
| Том 56, № 5 (2016) |
Article |
Nanodiamond and Nano-Onion-Like Carbon Oxidation Kinetics |
|
| Том 56, № 5 (2016) |
Inventions |
Review of RF Patents for Refractory Inventions |
|
| Том 56, № 6 (2016) |
Refractories in Heating Units |
Designing Refractories for the Tundish of a Continuous Caster |
|
| Том 56, № 6 (2016) |
Article |
Improving the Lining of Cars Used in Short Tunnel Furnaces |
|
| Том 56, № 6 (2016) |
Raw Materials |
Study of the Structure and Properties of Graphites for Refractory Production. Part 1. Physicochemical Study of Graphites from Different Deposits |
|
| Том 56, № 6 (2016) |
Production and Equipment |
Results from Study of a Pneumatic System for Transporting Nanoparticle-Bearing Lime Dust at the Serov Ferroalloys Plant |
|
| Том 56, № 6 (2016) |
Article |
Improving the Efficiency of Screens with a Linear Electromagnetic Motor |
|
| Том 56, № 6 (2016) |
Heat Engineering |
Developing an Energy-Efficient Lining for the Firing Zone of a High-Temperature Tunnel Furnace |
|
| Том 56, № 6 (2016) |
Article |
Boundary Conditions for Designing the Lining of a Glass-Founding Furnace with Innovative Parameters to Improve Technical Efficiency |
|
| Том 56, № 6 (2016) |
Scientific Research and Development |
Preparation of Highly Concentrated Binder Suspensions Based on Magnesium Aluminum Silicate Glass |
|
| Том 56, № 6 (2016) |
Article |
Study of Different Types of Carbon Fiber Oxidation Kinetics |
|
| Том 56, № 6 (2016) |
Article |
Thermal Shock-Resistant Ceramic Composites Based on Zirconium Dioxide1 |
|
| Том 56, № 6 (2016) |
Article |
Composite Material Based on Cubic Boron Nitride Micropowder with a Coating |
|
| Том 56, № 6 (2016) |
Article |
Study of Sodium Silicate System Firing During Glass Ceramic Foam Preparation |
|
| Том 56, № 6 (2016) |
Article |
Quantitative Structural Analysis of Permeable Ceramic Made from Narrow-Fraction Electrocorundum Powder of Different Fineness |
|
| Том 56, № 6 (2016) |
Article |
Analysis of the Reliability of Ceramic Parts After Hydroabrasive Machining |
|
| Том 56, № 6 (2016) |
Article |
Ceramic Matrix Composites Reinforced with Carbon Nanotubes: Spark Plasma Sintering, Modeling, Optimization |
|
| Том 56, № 6 (2016) |
Article |
Periclase-Carbon Refractory Reinforcement with Carbon Fibers |
|
| Том 56, № 6 (2016) |
Article |
Creation of a Combined Liquid Phenolfomaldehyde Antioxidant-Modifier for Improving Periclase-Carbon Refractory Life |
|
| Том 56, № 6 (2016) |
Article |
Research in the Field of Preparing Molded and Unmolded Refractories Based on High-Alumina HCBS. Part 3. Effect of Firing Temperature on Sintering and Mullitization of Materials Prepared on the Basis of Composite Composition HCBS1 |
|
| Том 56, № 6 (2016) |
Article |
Beryllium Oxide Powder Microstructure During Production Processing |
|
| Том 56, № 6 (2016) |
Article |
Coal Tar Pitch Modification Methods: Effect of Surfactant Substances and Carbon Additives on Binder Properties |
|
| Том 56, № 6 (2016) |
Article |
Study of the Sintering Mechanism of a Material Obtained from Crystallized Castings Prepared from Discharges of Lithium-Aluminosilicate Glass After Casting |
|
| Том 56, № 6 (2016) |
Article |
Numerical Modeling of the Stress-Strained State of a Surface Layer of Oxide-Carbide Ceramic with Jet-Abrasive Treatment |
|
| Том 56, № 6 (2016) |
Ecology |
Modeling of Air and Dust Flows in the Range of Action of a Round Suction Funnel Above an Impermeable Plane. Part 1. A Mathematical Model and Algorithm for its Computer Implementation |
|
| Том 56, № 6 (2016) |
Inventions |
Review of RF Patents for Refractory Inventions |
|
| Том 56, № 6 (2016) |
Article |
Review of RF Patents for Refractory Inventions |
|
| Том 57, № 1 (2016) |
Refractories in Heating Units |
Improving the Designs of Elements of Refractory Materials for the Tundish of Continuous Section Casters |
|
| Том 57, № 1 (2016) |
Article |
Study of Local (Pitting) Wear of the Periclase-Carbon Lining of a Ladle |
|
| Том 57, № 1 (2016) |
Article |
Technologies for Controlling Flows of Steel and the Development of Refractory Structures for the Tundish of a Four-Strand Continuous Caster |
|
| Том 57, № 1 (2016) |
Production and Equipment |
Capturing Nanoparticles in Alumina Production |
|
| Том 57, № 1 (2016) |
Heat Engineering |
Production of Foamed Vermiculite from Conglomerates in Modular-Pouring Electric Furnaces |
|
| Том 57, № 1 (2016) |
Article |
Thermophysical Properties of Carbon-Carbon Materials Based on Graphite Foam |
|
| Том 57, № 1 (2016) |
Scientific Research and Development |
Study of the Structure and Properties of Graphites for Refractory Production. Part 2. Properties of Periclaseand Corundum-Graphite Refractories with Introduction into Their Composition of Graphite from Different Producers1 |
|
| Том 57, № 1 (2016) |
Article |
Research in the Area of Preparing Materials Based on Fuzed Quartz HCBS. Part 8. Effect of Alkali Additions on Ceramic Sintering and Cristobalitization in a Nonisothermal Heating Regime1 |
|
| Том 57, № 1 (2016) |
Article |
Synthesis and Conversion on Heating of Nickel-Containing Antioxidant Organic Precursor for Periclase-Carbon Refractories |
|
| Том 57, № 1 (2016) |
Article |
Solar Technology for Obtaining Superconducting Ceramic Bi1.7Pb0.3Sr2Ca(n–1)CunOy (n = 3 – 5) and Studying its Properties |
|
| Том 57, № 1 (2016) |
Article |
Mechanochemically Activated Phosphate-Containing Refractory Composite Materials1 |
|
| Том 57, № 1 (2016) |
Article |
Ceramic Material for Making Heat-Resistant Products |
|
| Том 57, № 1 (2016) |
Article |
Corrosion Resistance of Chromium-Containing Refractories in Molten Alkali-Free Borosilicate Glass E |
|
| Том 57, № 1 (2016) |
Article |
Oxide Ceramic Surface Layer Modification Using Continuous Laser Radiation |
|
| Том 57, № 1 (2016) |
Article |
Effect of Firing Temperature and Gas Atmosphere on Acid-Resistant Material Pore Structure Formation |
|
| Том 57, № 1 (2016) |
Article |
Study of the Effect of pH Regulators and Polyelectrolytes on Lithium-Aluminum Silicate Glass Aqueous Suspension Parameters and Casting Properties |
|
| Том 57, № 1 (2016) |
Article |
Research in the Field of Preparing Molded and Unmolded Refractories Based on High-Alumina HCBS. Part 4. Effect of Refractory Clay Additions on Properties of Compound Composition HCBS, Castings, and Materials Based on Them |
|
| Том 57, № 1 (2016) |
Article |
Varying the Granulometric Composition of an Electrofused-Corundum-Based Ceramic with a Porcelain Binder to Control its Open Porosity and Strength |
|
| Том 57, № 1 (2016) |
Article |
Alumo-Yttrium Garnet Crucibles Made by Slip Casting for Work with High-Purity Powders |
|
| Том 57, № 1 (2016) |
Article |
Effect of Solid Reagent Dispersion in Heterogeneous Chemical Reactions |
|
| Том 57, № 1 (2016) |
Article |
Corundum and Zirconia Composites Based on Artificial Ceramic Binders |
|
| Том 57, № 1 (2016) |
Article |
Analysis of Oxide-Carbide Ceramic Surface Layer Stress-Strained State with Jet-Abrasive Treatment |
|
| Том 57, № 1 (2016) |
Ecology |
Modeling of Air and Dust Flows in the Range of Action of a Round Suction Funnel Above an Impermeable Plane. Part 2. Characteristics of Separation Region and Efficiency of Capture of Dust Particles1 |
|
| Том 57, № 2 (2016) |
Refractories in Heating Units |
Effect of Refining Slag Phase Composition on Ladle Furnace Unit Lining Life1 |
|
| Том 57, № 2 (2016) |
Article |
Durable Structures for the Lining of Electric-Arc Furnaces Used to Make Ferronickel and Granular Mattes |
|
| Том 57, № 2 (2016) |
Raw Materials |
Possibilities of a Thermomechanical Method for Enriching Magnesia-Bearing Raw Materials to Obtain Quality Magnesia |
|
| Том 57, № 2 (2016) |
Production and Equipment |
Theoretical and Applied Aspects of Forecasting Refractories of the Future |
|
| Том 57, № 2 (2016) |
Article |
Use of Spent Molding Sand in the Production of Refractories |
|
| Том 57, № 2 (2016) |
Scientific Research and Development |
Research in the Area of Preparing Materials Based on Fuzed Quartz HCBS. Part 9. Effect of Alkali Additions on Material Cristobalitization and Thermal Expansion After Nonisothermal Heating1 |
|
| Том 57, № 2 (2016) |
Article |
Stages in Multilayer Carbon Nanotube Formation with Mechanical Activation of Amorphous Carbon |
|
| Том 57, № 2 (2016) |
Article |
Ceramic of the Mullite–ZrO2–SiAlON System During Spark Plasma Sintering |
|
| Том 57, № 2 (2016) |
Article |
Synthesis and Reinforcement of Heat-Resistant Cordierite-Mullite Ceramic Structure with Introduction of a Fiber Filler |
|
| Том 57, № 2 (2016) |
Article |
Heat-Conducting Properties of High-Temperature Materials Based on Graphite Foam |
|
| Том 57, № 2 (2016) |
Article |
Corrosion Resistance of Refractories in Melts of Glasses Used to Immobilize Radioactive Wastes |
|
| Том 57, № 2 (2016) |
Article |
Micromachining of a High-Density Current-Conducting Ceramic With the Use of Electrical-Discharge Machining. Part 1 |
|
| Том 57, № 2 (2016) |
Article |
Improvement of Carbon Composite Material Refractoriness Due to Limitation of Surface Oxidation |
|
| Том 57, № 2 (2016) |
Article |
Research in the Field of Preparing Molded and Unmolded Refractories Based on High-Alumina HCBS. Part 5. Effect of Firing Temperature on Properties of Materials Prepared From Composite HCBS With Addition of Refractory Clay1 |
|
| Том 57, № 2 (2016) |
Article |
Complex Clinker-Less Binder Made from Refractory Wastes and Products Based on it |
|
| Том 57, № 2 (2016) |
Article |
Heat-Insulating Properties of Refractory Materials Made with the Use of Artificial Ceramic Binders |
|
| Том 57, № 2 (2016) |
Article |
The Stressed State of the Boundary Between Ceramic and a Coating Under the Effect of Power Loads |
|
| Том 57, № 2 (2016) |
Article |
Effects and Mechanisms of Binders on the Properities of Magnesium Oxide Pellets |
|
| Том 57, № 2 (2016) |
Article |
Shock-Resistant Materials Based on Commercial Grade Ceramic: Achievements and Prospects for Improving Their Ballistic Efficiency |
|
| Том 57, № 3 (2016) |
Refractories in Heating Units |
Analysis of Operation of a Steel-Pouring Ladle–Tundish System for a Section CBCM and Improved Refractory Structures of the Tundish Receiving Chamber |
|
| Том 57, № 3 (2016) |
Article |
Experience of Using Monoblock Stoppers with a Magnesia Head Section1 |
|
| Том 57, № 3 (2016) |
Raw Materials |
Satkinsk Deposit Magnesite Enrichment by an X-Ray Transmission Method |
|
| Том 57, № 3 (2016) |
Production and Equipment |
Dust Formation and a Solution for Dust Collection During Economic Mineral Processing in Quarries |
|
| Том 57, № 3 (2016) |
Heat Engineering |
Transformation of Vermiculite Energy Into Mechanical Transformation Energy During Firing in Electric Furnaces With a “Zero” Module |
|
| Том 57, № 3 (2016) |
Article |
Study of an Electric Furnace Physical Model for Firing Vermiculite with a “Zero” Module |
|
| Том 57, № 3 (2016) |
Scientific Research and Development |
Research in the Area of Preparing Materials Based on Fuzed Quartz HCBS. Part 10. Some Properties of Cristobalite-Containing Materials1 |
|
| Том 57, № 3 (2016) |
Article |
Mullite-Corundum Material Based on High-Alumina Chamotte Grade RASC |
|
| Том 57, № 3 (2016) |
Article |
Complex Clinker-Less Binder Made from Refractory Wastes and Products Based on it. Part 3. Optimization of Complex Binder Composition Based on Cake and Grinding Powder and Establishment of a Correlation Between Production Factors and its Properties1 |
|
| Том 57, № 3 (2016) |
Article |
Complex Clinker-Less Binder Made From Refractory Wastes and Products Based on it. Part 4. Study of CLCP-Powder Stone Structure1 |
|
| Том 57, № 3 (2016) |
Article |
Influence of Microstructure on Formation of Deterioration Layer in Periclase-Hercynite Bricks |
|
| Том 57, № 3 (2016) |
Article |
Periclase-Carbon Refractory Properties with a Different Amount of Graphite in the Charge Using Liquid PFR and Graphite as Modifiers |
|
| Том 57, № 3 (2016) |
Article |
UHF-Energy Absorbents Based on Products of Aluminum-Magnesium Alloy Chemical Dispersion Products |
|
| Том 57, № 3 (2016) |
Article |
Micromachining of a High-Density Current-Conducting Ceramic with the Use of Electrical-Discharge Machining. Part 2 |
|
| Том 57, № 3 (2016) |
Article |
Reinforcement of Periclase-Carbon Refractories with Carbon Fibers1 |
|
| Том 57, № 3 (2016) |
Article |
Carbide Formation at a Carbon-Graphite Lining Cathode Surface Wettable with Aluminum |
|
| Том 57, № 3 (2016) |
Article |
Research in the Field of Preparing Molded and Unmolded Refractories Based on High-Alumina HCBS. Part 6. Mullitization and Thermal Expansion of Materials Based on Compound Composition HCBS1 |
|
| Том 57, № 3 (2016) |
Article |
Kinetics of Fuzed Periclase Wetting with Coal-Tar Pitch |
|
| Том 57, № 3 (2016) |
Article |
Stressed State of a Boundary Between Ceramic and Coating Under Action of a Combined Load |
|
| Том 57, № 3 (2016) |
Article |
Quantitative Analysis of Permeable Ceramic Structure Made From Narrow-Fraction Electrocorundum Powder and Corundum Hollow Microspheres |
|
| Том 57, № 3 (2016) |
Article |
Physicochemical Study of Alumochromium-Containing Refractories Developed by Self-Propagating High-Temperature Synthesis |
|
| Том 57, № 3 (2016) |
Article |
Interaction of Copper Oxide with Zirconium Dioxide Stabilized with Yttrium Oxide |
|
| Том 57, № 3 (2016) |
Ecology |
Modeling Dust and Air Flow Within an Aspirated Shelter |
|
| Том 57, № 3 (2016) |
Quality and Certification |
Study of Heat Insulation Material Thermal Conductivity by a Hot-Wire Method |
|
| Том 57, № 3 (2016) |
Erratum |
Erratum to: Ceramic of the Mullite–ZrO2–SiAlON System During Spark Plasma Sintering |
|
| Том 57, № 4 (2016) |
Refractories in Heating Units |
Experience of Using Silica-Free Alumox Binder in Technology for Preparing Composite Ceramic Investment Casting Molds for Superalloy Directional Solidification |
|
| Том 57, № 4 (2016) |
Raw Materials |
Effect of Carbon Type on Unmolded Refractory Material Properties. Part 1. Study of Carbon-Containing Material Structure and Properties |
|
| Том 57, № 4 (2016) |
Production and Equipment |
Production of Fuzed Zirconium Dioxide in OAO Pervouralsk Silica Plant1 |
|
| Том 57, № 4 (2016) |
Heat Engineering |
Monitoring of Process Flow Diagrams in the Production of Ferrous Metals |
|
| Том 57, № 4 (2016) |
Scientific Research and Development |
Nanostructured Disaggregated Aluminum Hydroxide and Oxide Powders |
|
| Том 57, № 4 (2016) |
Article |
Study of Thermal Shock Resistance of Pulsed High-Temperature Equipment Refractories |
|
| Том 57, № 4 (2016) |
Article |
Research in the Area of Preparing Materials Based on Fuzed Quartz HCBS. Part 11. Tests for Implementing New Unfired Quartz Refractory Technology1 |
|
| Том 57, № 4 (2016) |
Article |
Physicochemical Processes in Wear-Resistant Corundum Ceramic Materials Science and Technology: Nozzles for Underground Soil Tunnelling Rimmers |
|
| Том 57, № 4 (2016) |
Article |
Structural Changes in Binder During Oxidation of Periclase-Carbon Refractories |
|
| Том 57, № 4 (2016) |
Article |
Roughness of High Hardness Ceramic Correlation of Diamond Grinding Regimes with Al2O3-Ceramic Surface Condition |
|
| Том 57, № 4 (2016) |
Article |
Crack Genesis in Refractories |
|
| Том 57, № 4 (2016) |
Article |
Structure, Properties, and Use of Protective Cermet Coatings Prepared By Electric-Spark Alloying and Electric-Arc Hardfacing |
|
| Том 57, № 4 (2016) |
Article |
Clinkerless Complex Binder from Refractory Waste and Objects Based on It1 |
|
| Том 57, № 4 (2016) |
Article |
Thinning of Argillaceous Suspensions |
|
| Том 57, № 4 (2016) |
Article |
High-Temperature Engineering Ceramic Based on Complex Titanates Having a Hollandite Structure |
|
| Том 57, № 4 (2016) |
Article |
Effect of Al2O3 + 4SiO2 Additives on Sintering Behavior and Thermal Shock Resistance of MgO-Based Ceramics |
|
| Том 57, № 4 (2016) |
Article |
Production Features of Preparation and Properties of Ceramic Objects Made from a Mixture of Lightlyand Highly-Fired BeO Powder |
|
| Том 57, № 4 (2016) |
Article |
Transformation of the Stressed State of a Surface Layer of Nitride Ceramic with a Change in TiC-Coating Thickness. Loading Version — Concentrated Force Load |
|
| Том 58, № 3 (2017) |
Article |
Effect of Adding Nano-Materials on Pitch Rheological Properties |
|
| Том 58, № 3 (2017) |
Article |
Ultra-High-Temperature Ceramics Based on HfB2 – 30% SiC: Production and Basic Properties |
|
| Том 58, № 3 (2017) |
Article |
Main Aspects of Improving Abrasive Treatment Efficiency for Structural and Functional Ceramic Objects |
|
| Том 58, № 3 (2017) |
Article |
Features of Al2O3–TiC-Ceramic Specimen Edge Morphology Formation During Diamond Grinding |
|
| Том 58, № 3 (2017) |
Article |
Stabilization of Refining Slag by Adjusting Its Phase Composition and Giving It the Properties of Mineral Binders |
|
| Том 58, № 3 (2017) |
Article |
Investigation of the Change in the Phase Composition, Properties, and Hydraulic Activity During the Thermal Treatment of Magnesian Materials |
|
| Том 58, № 3 (2017) |
Article |
Stressed State of Boundary Between TiC/TiN-Coating Layers Applied to Nitride Ceramic Under Action of a Force Load |
|
| Том 58, № 3 (2017) |
Ecology |
Ventilation of Aerosol in a Thin-Walled Suction Funnel with Incoming Flow. Part 2. Dynamics of Dust Particles1 |
|
| Том 58, № 3 (2017) |
Correction |
Correction to: Correlation of Diamond Grinding Regimes with SiSiC-Ceramic Surface Condition |
|
| Том 58, № 4 (2017) |
Refractories in Heating Units |
Upgrading of the Refractory Equipment of a Continuous Section Caster |
|
| Том 57, № 5 (2017) |
Article |
Study of Preparation of Prescribed Pore Configuration in Zirconium Dioxide Ceramic Due to Carbamide Directional Solidification |
|
| Том 58, № 4 (2017) |
Raw Materials |
Waste-Free Recycling of Secondary Bacor Resources1 |
|
| Том 58, № 4 (2017) |
Production and Equipment |
Half-Century Epoch of Domestic Quartz Ceramic Development. Part 21 |
|
| Том 58, № 4 (2017) |
Article |
Production of Porousized Ceramic Materials with the Use of Depleted Peat-Based Admixtures |
|
| Том 58, № 4 (2017) |
Heat Engineering |
Energy Efficiency of Electric Furnaces with Movable Floor in Firing of Vermiculite Concentrates of Different Size Groups |
|
| Том 58, № 4 (2017) |
Scientific Research and Development |
Oxidation Resistance of Nano-Reinforced PC-Refractories Modified with Phenol Formaldehyde Resin. Part 4. Thermodynamic Evaluation of Phase Formation Within Mg–O–C–Al, Mg–O–C–Ni and MgO–Al2O3–NiO–SiO2 Systems Using SiC + Al + Ni (NiO) Complex Antioxidant1 |
|
| Том 58, № 4 (2017) |
Article |
The Use of the D-Optimal Mixture Design to Develop a Novel Refractory Ramming Mix of the MgO–SiO2–SiC–C System for Blast Furnace Pig Iron Runners |
|
| Том 58, № 4 (2017) |
Article |
Effect of Electrocorundum Powder Grain Size Composition with a Porcelain Binder on Porous Ceramic Gas Permeability and Strength |
|
| Том 58, № 4 (2017) |
Article |
Highly Porous Granulated Corundum Filler of Alumina-Foam Polystyrene Mixture. Parts 1 and 2 |
|
| Том 58, № 4 (2017) |
Article |
Preparation of Sodium Silicate Fluid Grouts and Investigation of Their Influence on the Thermal Stability of Slag-Lime Concrete |
|
| Том 58, № 4 (2017) |
Article |
Lightweight Composite Cermets Obtained by Titanium-Plating |
|
| Том 57, № 5 (2017) |
Article |
Composite Ceramic Based on Cubic Boron Nitride and Carbon Nanostructures |
|
| Том 58, № 4 (2017) |
Article |
Minimum TiB2 Content in a Composite Cathode Wetted with Aluminum |
|
| Том 58, № 4 (2017) |
Article |
Level of Y–TZP-Ceramic Specimen Edge Defects After Diamond Machining |
|
| Том 58, № 4 (2017) |
Article |
Preparation of Mullite–TiC–TiN Materials by a Plasma Spark Method and Their Properties |
|
| Том 58, № 4 (2017) |
Article |
Evolution of Refractory Materials for Rotary Cement Kiln Sintering Zone |
|
| Том 58, № 4 (2017) |
Article |
Spectral and Total Emissivity of the Reaction Bonded Silicon Nitride |
|
| Том 58, № 4 (2017) |
Article |
Study of Thermophysical Property Formation of Spatially Reinforced Carbon-Carbon Composite Materials |
|
| Том 58, № 4 (2017) |
Article |
Research in the Field of Preparing Molded and Unmolded Refractories Based on High-Alumina HCBS. Part 11. Composite Composition HCBS (Fuzed Corundum-Bauxite, Sintered Bauxite, Quartz Glass) and Some Properties of Materials Based Upon Them1 |
|
| Том 58, № 4 (2017) |
Article |
Mathematical Modeling of Thermomechanical Processes in the Boundary Layer of a TiC/TiN-Coating Applied to Nitride Ceramic |
|
| Том 57, № 5 (2017) |
Article |
Effect of Different Types of Nanostructured Additives and Mechanical Action on Pitch Matrix Properties for Producing Artificial Graphite |
|
| Том 57, № 5 (2017) |
Article |
Effect of Milling and Sintering Temperature of TaC–TaB2 Composite on Lattice Parameter and C/Ta Ratio |
|
| Том 57, № 5 (2017) |
Article |
Self-Propagating High-Temperature Synthesis of Zirconium Nitride from the Elements |
|
| Том 57, № 5 (2017) |
Article |
Thermal Expansion of Composite Ceramic of the Zirconium Dioxide – Aluminum Oxide System |
|
| Том 57, № 5 (2017) |
Article |
Correlation of Diamond Grinding Regimes with Al2O3–TiC-Ceramic Surface Condition |
|
| Том 57, № 5 (2017) |
Article |
Study of Artificial Ceramic Binder Properties in the System Al2O3–SiO2–SiC |
|
| Том 57, № 5 (2017) |
Article |
Combined Elemental Synthesis of Boron and Silicon Carbides |
|
| Том 57, № 5 (2017) |
Article |
Research in the Field of Preparing Molded and Unmolded Refractories Based on High-Alumina HCBS. Part 7. Sintering and Secondary Mullite Formation of Materials Based on Composite Composition HCBS During Nonisothermal Heating and Isothermal Firing1 |
|
| Том 57, № 5 (2017) |
Article |
Fused Refractory Oxides Increasing Nonferrous Metallurgy Unit Lining Life |
|
| Том 57, № 5 (2017) |
Article |
Corundum Composite Ceramic Prepared Using Boehmite Nanoparticles |
|
| Том 57, № 5 (2017) |
Article |
Nitride Ceramic Surface Layer Stressed State Transformation with a Change in TiC-Coating Thickness. Stress – Distributed Force Load Version |
|
| Том 57, № 5 (2017) |
Ecology |
Reducing the Power Consumption of Ventilation Systems Through Forced Recirculation |
|
| Том 57, № 6 (2017) |
Refractories in Heating Units |
Chromite-Periclase Refractory Wear in Zinc Production Waelz Kiln Reaction Zone |
|
| Том 57, № 6 (2017) |
Raw Materials |
Effect of Aluminum-Containing Nanotechnogenic Raw Material and Pyrophillite on Glass Phase Mullitization in Composite Acid-Resistant Ceramic |
|
| Том 57, № 6 (2017) |
Heat Engineering |
Design of Tubular Caisson with Refractory Packing Placed in Water-Cooled Tenons for Use in Silicate Melts |
|
| Том 57, № 6 (2017) |
Article |
Mathematical Modeling of the Movement of Moisture in Refractory Concrete and Gunning Bodies During Drying |
|
| Том 57, № 6 (2017) |
Article |
Methods and Limits for Improving the Energy Efficiency of Modular-Pouring Electric Furnaces for Firing Vermiculite. Transitioning to a New Concept |
|
| Том 57, № 6 (2017) |
Production and Equipment |
Use of Discrete Carbon Fibers in Refractory Materials |
|
| Том 57, № 6 (2017) |
Article |
Use of Economic Mineral Hydraulic Mining Technology for Expanding the Raw Material Base for Refractory Manufacture |
|
| Том 57, № 5 (2017) |
Article |
Combined Highly Resistant Lining of Furnace Chamber for Drying Nutritional Yeast Suspension |
|
| Том 57, № 6 (2017) |
Scientific Research and Development |
Study of Porous Ceramic Based on Silicon Nitride Prepared Using Three-Dimensional Printing Technology |
|
| Том 57, № 6 (2017) |
Article |
Oxidation-Resistant Nano-Reinforced PC-refractories of Modified Phenolformaldehyde Resin. Part 2. Modification of Phenolformaldehyde Resins with Silicon Alkoxide Sols1 |
|
| Том 57, № 6 (2017) |
Article |
Effect of Adding Porcelain on Properties of Porous Ceramic Based on Electromelted Corundum |
|
| Том 57, № 6 (2017) |
Article |
Physicochemical Processes and Mechanism for Preparing Belaz Quarry Dumper Truck Heat-Resistant Electrical Insulators |
|
| Том 57, № 6 (2017) |
Article |
Segments of A Diamond Tool with Compound Structure for Cutting of Hard Brittle Materials – an Approach to the Creation of “Smart Segments”1 |
|
| Том 57, № 6 (2017) |
Article |
Correlation of Diamond Grinding Regime with Surface Condition of Ceramic Based on Zirconium Dioxide |
|
| Том 57, № 6 (2017) |
Article |
Effect of a Change in the Structural Parameters of Pitch Coke During Heat Treatment on Its Interaction with a Silicon Melt |
|
| Том 57, № 6 (2017) |
Article |
Research in the Field of Preparing Molded and Unmolded Refractories Based on High-Alumina HCBS. Part 8. Effect of Firing Temperature on Properties of Materials Based on Mixed HCBS Composition: Bauxite, Quartz Glass, and Reactive Alumina1 |
|
| Том 57, № 6 (2017) |
Article |
Preparation of Mullite–TiC–ZrC-Ceramic Materials by a Plasma-ARC Method and Their Properties |
|
| Том 57, № 6 (2017) |
Article |
Study of Alkali Resistance of Refractory Materials Used in Boilers Operating on Wood Fuel |
|
| Том 57, № 5 (2017) |
Raw Materials |
Graphite. Evaluation of Quality for Refractory Industry |
|
| Том 57, № 6 (2017) |
Article |
Formation and Sintering of Boehmite and Aluminum Oxide Nanopowders |
|
| Том 57, № 6 (2017) |
Article |
Lead-Titanate-Based Ceramics That Protect Against Gamma Radiation |
|
| Том 57, № 6 (2017) |
Quality and Certification |
Use of Natural Vibrations in Flaw Detection of Heat-Stressed Equipment |
|
| Том 58, № 1 (2017) |
Refractories in Heating Units |
Technology for Controlling Steel Flows and Improvement of Refractory Structures for a CBCM Submersible Nozzle — Crystallizer System |
|
| Том 58, № 1 (2017) |
Production and Equipment |
Development of New Refractory Materials for Cement Industry Rotary Kilns |
|
| Том 58, № 1 (2017) |
Article |
Determination of the Dynamic Characteristics of a Charge in the Bucket of a Steeply Inclined Pivoted Bucket Belt Conveyor |
|
| Том 58, № 1 (2017) |
Article |
Modernization of the Units of a Tubular Scraper Flight Conveyor |
|
| Том 58, № 1 (2017) |
Heat Engineering |
Analytical Model of Absorption-Reflection Properties of Vermiculite Under Thermal Radiation Conditions |
|
| Том 58, № 1 (2017) |
Article |
Generalized Analysis of the Heat Work of Glassmaking Furnaces |
|
| Том 58, № 1 (2017) |
Article |
Energy Efficient Electric Furnace with Moving Hearth Platform for Firing Vermiculite |
|
| Том 57, № 5 (2017) |
Production and Equipment |
Prerequisites for the Creation of Energy-Conserving Constructions of Tubular Belt Conveyors |
|
| Том 58, № 1 (2017) |
Scientific Research and Development |
Preparation of Ceramic Materials Based on TiC–W2C–Co by SHS-Extrusion |
|
| Том 58, № 1 (2017) |
Article |
Oxidation-Resistant Nano-Reinforced PC-Refractories of Modified Phenolformaldehyde Resin. Part 3. Formation Mechanism of Organic – Inorganic Complexes During Low-Temperature Synthesis of Nanoparticles of Additional Antioxidants and Their Effectiveness1 |
|
| Том 58, № 1 (2017) |
Article |
Ultrahigh-Temperature Ceramic Based on ZrB2–SiC: Preparation and Main Properties |
|
| Том 58, № 1 (2017) |
Article |
Preparation of Highly Porous Silicon Nitride Materials |
|
| Том 58, № 1 (2017) |
Article |
Effect of Blowing-Agent Addition on the Structure and Properties of Magnesia Porous Material |
|
| Том 58, № 1 (2017) |
Article |
Ceramic Material Porous Structure Prepared Using Pore-Forming Additives |
|
| Том 58, № 1 (2017) |
Article |
Study of Permeable Ceramic Pore Structure by X-Ray Microtomography |
|
| Том 58, № 1 (2017) |
Article |
Effect of Modifying Pitch on Carbon-Carbon Composite Material Density |
|
| Том 58, № 1 (2017) |
Article |
Correlation of Diamond Grinding Regimes with Si3N4-Ceramic Surface Quality |
|
| Том 58, № 1 (2017) |
Article |
Nitride Ceramic Surface Layer Stressed State Transformation with a Change in TiC-coating Thickness. Stress Version — Heat Flow |
|
| Том 57, № 5 (2017) |
Heat Engineering |
Determination of the Precision Characteristics of Contact and Contactless Methods of Monitoring the Temperature of a Surface |
|
| Том 58, № 1 (2017) |
Article |
Strengthening Binders for Porous Permeable Ceramic with Electromelted Corundum Filler |
|
| Том 58, № 1 (2017) |
Article |
Formation of Carbon-Carbon Composite Material Thermal Conductivity Standards |
|
| Том 58, № 1 (2017) |
Article |
Research in the Field of Preparing Molded and Unmolded Refractories Based on High-Alumina HCBS. Part 9. Preparation and Properties of Mixed HCBS Composition: Fuzed Bauxite-Corundum, Quartz Glass, Reactive Alumina. Dilatometric Study of Materials Based on Them |
|
| Том 58, № 1 (2017) |
Article |
Study of Artificial Ceramic Binders of Mullite-Silicon Carbide Composition and Composites Based on Them |
|
| Том 58, № 1 (2017) |
Article |
Thermophysical Properties of Carbon-Carbon Materials Based on Graphite Foam |
|
| Том 58, № 1 (2017) |
Erratum |
Erratum to: Preparation of Mullite–TiC–ZrC-Ceramic Materials by a Plasma-ARC Method and Their Properties |
|
| Том 58, № 1 (2017) |
Erratum |
Erratum to: Production of a Mullite-Zirconia Ceramic by the Plasma-Spark Method |
|
| Том 58, № 2 (2017) |
Refractories in Heating Units |
Experience of Using Alumina Aluminum-Containing Flux During Treatment of “Aluminum-Free” Steels1 |
|
| Том 58, № 2 (2017) |
Article |
Trouble-Free Construction of a Large Diameter Waelz Kiln Lining with Increased Life |
|
| Том 58, № 2 (2017) |
Article |
Operational Problems of a Graphitized Cathodic Block Lining in Contemporary Aluminum Electrolyzers |
|
| Том 57, № 5 (2017) |
Article |
A Technique of Calculating Heat Losses Through the Multi-Layer Solid – Gas Lining of Heating Furnaces |
|
| Том 58, № 2 (2017) |
Raw Materials |
Titanium-Alumina Slag — Semifunctional Technogenic Resource of High-Alumina Composition. Part 1. Substance Composition and Titanium-Alumina Slag Properties |
|
| Том 58, № 2 (2017) |
Article |
Insulating Refractory Bricks from Water Treatment Sludge and Rice Husk Ash |
|
| Том 58, № 2 (2017) |
Production and Equipment |
Periclase-Carbon Refractories Molded by a New Method1 |
|
| Том 58, № 2 (2017) |
Article |
Contemporary Technology for Preparing Fiber-Reinforced Composite Materials with a Ceramic Refractory Matrix (Review) |
|
| Том 58, № 2 (2017) |
Scientific Research and Development |
Spinel Production1 |
|
| Том 58, № 2 (2017) |
Article |
Carbide Synthesis Resulting from Mechanical Activation of Titanium and Various Carbon Components |
|
| Том 58, № 2 (2017) |
Article |
Combined Carbothermal Synthesis of Powders in the B4C–SiC–TiB2 System |
|
| Том 58, № 2 (2017) |
Article |
Preparation of Finely Crystalline Yttrium-Aluminum Garnet in Solar Furnaces |
|
| Том 58, № 2 (2017) |
Article |
Effect of Modifying Additions on Synthesis and Properties of Cordierite-Mullite Ceramic from Kazakhstan Resources |
|
| Том 58, № 2 (2017) |
Article |
Well-Dispersed Carbon Nanotubes for Greatly Enhanced Mechanical Properties of Alumina-Based Composites |
|
| Том 57, № 5 (2017) |
Scientific Research and Development |
Study of the Structure and Properties of Graphites for Refractory Production. Part 2. Comparative Production Tests for Unmolded Carbon-Containing Refractory Materials with Different Forms of Carbon |
|
| Том 58, № 2 (2017) |
Article |
Protective Coatings Based on ZrO2–Y2O3 and Al2O3–TiO2 Systems with Modifying Additives on CCCM |
|
| Том 58, № 2 (2017) |
Article |
Preparation of Composite Materials from Refractory Powders with Surface Nanofilms |
|
| Том 58, № 2 (2017) |
Article |
Heat and Sound Insulation Material Prepared Using Plant Raw Material |
|
| Том 58, № 2 (2017) |
Article |
Correlation of Diamond Grinding Regimes with SiSiC-Ceramic Surface Condition |
|
| Том 58, № 2 (2017) |
Article |
Transformation of the Stressed State of a Surface Layer of Nitride Ceramic with a Change in TiC-Coating Thickness. Loading Version – Combined Loading |
|
| Том 58, № 2 (2017) |
Article |
Research in the Field of Preparing Molded and Unmolded Refractories Based on High-Alumina HCBS. Part 10. Effect of Firing Temperature on Properties of Materials Prepared Based on Mixed Composition HCBS from Fuzed Bauxite-Corundum, Quartz Glass, and Reactive Alumina1 |
|
| Том 58, № 2 (2017) |
Article |
Investigation of the Process of Formation of Hafnium Carbide on Carbon-Carbon Composite Material in the System HfCl4–CH4–Ar |
|
| Том 58, № 2 (2017) |
Article |
Radioparent Heat-Resistant Coating Based on Inorganic Binder |
|
| Том 58, № 2 (2017) |
Ecology |
Ventilation of Aerosol in a Thin-Walled Suction Funnel with Incoming Flow. Part 1. Development of Mathematical Model and Computational Algorithm |
|
| Том 58, № 2 (2017) |
Erratum |
Erratum to: Preparation of Mullite–TiC–ZrC-Ceramic Materials by a Plasma-ARC Method and Their Properties |
|
| Том 57, № 5 (2017) |
Article |
Oxidation-Resistant Nano-Reinforced PC-refractories of Modified Phenolformaldehyde Resin. Part 1. Modification of Phenolformaldehyde Resins with Silicon Alkoxides |
|
| Том 58, № 2 (2017) |
Erratum |
Erratum to: Production of a Mullite-Zirconia Ceramic by the Plasma-Spark Method |
|
| Том 58, № 2 (2017) |
Erratum |
Erratum to: Effect of Thermal Shock and Additions of Clay on the Properties of a Mullite-Zirconia Ceramic |
|
| Том 58, № 3 (2017) |
Refractories in Heating Units |
Choice of Refractory Filler for Preparing Concrete Partitions of a CBCM Intermediate Ladle |
|
| Том 58, № 3 (2017) |
Article |
Improving Refractory Constructions in the System “Steel-Pouring Ladle – Pouring Basket” of CBCM |
|
| Том 58, № 3 (2017) |
Raw Materials |
Secondary Mineral Resources for Refractory Manufacture. Part 1. Silica Technogenic Materials |
|
| Том 58, № 3 (2017) |
Article |
Ceramic Proppants Based on Kazakhstan Natural Alumosilicate Resources |
|
| Том 58, № 3 (2017) |
Heat Engineering |
Improvement of Electric Furnace Energy Efficiency for Firing Vermiculite Due to “Zero Modules” Not Requiring Electrical Energy |
|
| Том 58, № 3 (2017) |
Production and Equipment |
Half-Century Epoch of Domestic Quartz Ceramic Development. Part 1 |
|
| Том 58, № 3 (2017) |
Article |
A Method of Additive Aerodynamic Calculation of the Friction Gear Classification Block |
|
| Том 57, № 5 (2017) |
Refractories in Heating Units |
Steel-Pouring Ladle Periclase-Carbon Lining Local (Pitting) Wear Formation Mechanism |
|
| Том 58, № 3 (2017) |
Scientific Research and Development |
Porous SHS-Materials Based on Iron Oxide and Aluminum with Additions of Alloying Elements |
|
| Том 57, № 5 (2017) |
Article |
Refractory Porous Materials Based on Secondary Resources and Phosphate Compounds |
|
| Том 58, № 5 (2018) |
Refractories in Heating Units |
Investigation of the Physicochemical Properties of Slag Splashed on the Lining of an Oxygen Converter1 |
|
| Том 58, № 5 (2018) |
Article |
Effect of Operational Factors on Steel-Teeming Ladle Lining Working Layer Life |
|
| Том 58, № 5 (2018) |
Article |
Creation of High-Efficiency Promising Refractory Materials and Constructions for the Lining of Metallurgical Units |
|
| Том 58, № 5 (2018) |
Article |
Structure of Periclase-Chromite Refractories After the Service Life in Furnaces for the Processing of Sulfide Raw Material |
|
| Том 58, № 5 (2018) |
Raw Materials |
Titanium-Alumina Slag – Semifunctional Technogenic Resource of High-Alumina Composition. Part 2. Use of Ferrotitanium Slag for Producing Refractories in Metallurgy and Other Branches of Industry1 |
|
| Том 58, № 5 (2018) |
Article |
Ferrochrome Aluminothermal Slags as a Multifunctional Technogenic Resource. Part 1. Ferrochrome Slag Material Composition and Properties |
|
| Том 58, № 5 (2018) |
Production and Equipment |
Half-Century Epoch of Domestic Quartz Ceramic Development. Part 31 |
|
| Том 58, № 5 (2018) |
Article |
Research in the Field of Preparing Molded and Unmolded Refractories Based on High-Alumina HCBS. Part 11. Composite Composition HCBS (Bauxite Electrocorundum, Quartz Glass) and some Properties of Materials Based Upon Them1 |
|
| Том 58, № 5 (2018) |
Article |
Determination of the Parameters of a Counterblow Grinder |
|
| Том 58, № 5 (2018) |
Heat Engineering |
Effect of Kaolin Heat Treatment on its Properties1 |
|
| Том 58, № 5 (2018) |
Scientific Research and Development |
Oxidation Resistance of Nano-Reinforced PC-Refractories Modified with Phenol Formaldehyde Resin. Part 5. Optimization of Filler Grain Size Composition by Means of a Simplex-Lattice Planning Method Using Complex Modification of Charge Components1 |
|
| Том 58, № 5 (2018) |
Article |
Highly Porous Permeable Cellular Ceramic Based on Silicon Carbide with Added Mullite |
|
| Том 58, № 5 (2018) |
Article |
Structure and Physicomechanical Properties of Porous Ceramic Based on Al2O3 Prepared Using a Filtration Combustion Method |
|
| Том 58, № 5 (2018) |
Article |
Highly Porous Granulated Corundum Filler of Alumina-Foam Polystyrene Mixture. Part 3. Theoretical Premises of Pelletizing Alumina-Polystyrene Foam Mixtures in a Granulator1 |
|
| Том 58, № 5 (2018) |
Article |
Influence of Interphase Physico-Chemical Processes on the Structure and Strength Characteristics of a High-Temperature Soldered SiC Ceramic Joint |
|
| Том 58, № 5 (2018) |
Article |
Effect of Sintering Atmospheres on the Processing of SiC/AlN Ceramic Composites |
|
| Том 58, № 5 (2018) |
Article |
High-Temperature Firing of Composite Based on the Max-Phase of the Ti–Al–C System |
|
| Том 58, № 5 (2018) |
Article |
Production Process Planning for Preparing Si3N4-Ceramic Objects Taking Account of Edge Defectiveness |
|
| Том 58, № 5 (2018) |
Article |
Possibility of Preparing Aluminosilicate Fillers Based on Kaolin and Technogenic Materials |
|
| Том 58, № 5 (2018) |
Article |
Corrosive Resistance of Mullite-Silicon Carbide Refractory Composites |
|
| Том 58, № 5 (2018) |
Article |
Microstructure and Mechanical Properties of SiC-Materials Sintered in the Liquid Phase with the Addition of a Finely Dispersed Agent |
|
| Том 58, № 5 (2018) |
Article |
Efficiency of Vortex-Layer Plants in Processes That Arise in the Course of Grinding of Powder-Like Materials |
|
| Том 58, № 5 (2018) |
Article |
Effect of Force Action Parameters on Stress Inhomogeneity at a Boundary Between Nitride Ceramic and TiC-Coating |
|
| Том 58, № 5 (2018) |
Ecology |
A Method for the Evaluation of the Required Flow Rate of Aspirated Air for the Reloading of Loose Materials in Telescopic Plants |
|
| Том 58, № 5 (2018) |
Correction |
Correction to: Preparation of Mullite–TiC–TiN Materials by a Plasma Spark Method and Their Properties |
|
| Том 58, № 6 (2018) |
Refractories in Heating Units |
Design Engineering of Refractory Components for Use in Refining Continuous-Cast Steel |
|
| Том 58, № 6 (2018) |
Raw Materials |
Ferrochrome Aluminothermal Slags as a Multifunctional Technogenic Resource. Part 2. Use of Ferrochrome Slags in Refractories and Metallurgy1 |
|
| Том 58, № 6 (2018) |
Production and Equipment |
Refractory Ceramic Products from Pure Oxides with Getter Coatings |
|
| Том 58, № 6 (2018) |
Scientific Research and Development |
Mullite-Corundum Materials Based on Mullite Binder Resistant to High-Temperature Deformation |
|
| Том 58, № 6 (2018) |
Article |
Influence of the Procedure of Getting of a Highly Dispersed Additive on the Properties of Corundum Ceramics |
|
| Том 58, № 6 (2018) |
Article |
Kinetics of Oxidation of Composite Materials Based on Discrete Carbon Fibers |
|
| Том 58, № 6 (2018) |
Article |
Formation of Protective Ceramic-Metal Coatings on Steel Surfaces by Microarc Oxidation with Electro-Chemical Deposition of Nickel |
|
| Том 58, № 6 (2018) |
Article |
Highly Porous Granulated Corundum filler of Alumina-Foam Polystyrene Mixture. Part 4. Determination of Optimum Mixture Compositions1 |
|
| Том 58, № 6 (2018) |
Article |
Influence of Various Factors on the Properties of Refractory Concrete |
|
| Том 58, № 6 (2018) |
Article |
Technological Provision of the Quality of Ring Edges of Silicon-Carbide Friction Couples for the End Seals of the Pumps |
|
| Том 58, № 6 (2018) |
Article |
Research in the Field of Preparing Molded and Unmolded Refractories Based on High-Alumina HCBS. Part 13. Effect of Firing Temperature on Phase Composition, Structure, and Some Properties of Materials Based on Composite Composition HCBS (Bauxite, Electrocorundum, Quartz Glass)1 |
|
| Том 58, № 6 (2018) |
Article |
Prediction of Nonmetallic Inclusion Composition and Amount During Low-Alloy Pipe Steel Production |
|
| Том 58, № 6 (2018) |
Article |
Phase Formation During Reactive Sintering of the B4C–SiC–Si(Al) Composite (Review) |
|
| Том 58, № 6 (2018) |
Article |
Main Areas for Improving Refractory Fiber-Reinforced Ceramic Matrix Composite Corrosion and Heat Resistance (Review) |
|
| Том 58, № 6 (2018) |
Article |
The Effect of Synthesis Temperature and Gallium Oxide Additive on the Structure and Phase Composition of Magnesium Aluminate Spinel Powder |
|
| Том 58, № 6 (2018) |
Article |
Composite (BeO + TiO2)-Ceramic for Electronic Engineering and Other Fields of Technology (Review) |
|
| Том 58, № 6 (2018) |
Article |
Electricainsulating Materials-Products for Welding Equipment |
|
| Том 58, № 6 (2018) |
Article |
Estimation of the Sensitivity of a Complex of Characteristics of the Stressed State of Ceramics – Coating Boundary to the Changes in the Properties of Structural Elements of this System |
|
| Том 59, № 1 (2018) |
Refractories in Heating Units |
Corrosion Testing of Baddeleyite-Corundum and Chromium Oxide Materials in Aluminum Phosphate Glass Melts |
|
| Том 59, № 1 (2018) |
Article |
Analysis of the Process of Metal Casting and the Structure of Refractory Equipment of the “Tundish Ladle – Submerged Nozzle – Crystallizer” System of a Section CBCM |
|
| Том 59, № 1 (2018) |
Article |
A Study of 3D Geometric Shapes, Optimum dimensions, and Designs for Refractory Products for Improved Unit Durability |
|
| Том 59, № 1 (2018) |
Raw Materials |
Use of Schungite Rocks as a Binder in Refractory Materials |
|
| Том 59, № 1 (2018) |
Heat Engineering |
Universal Structure of Thermal Insulation of the Melting Tanks of Glass-Melting Furnace |
|
| Том 59, № 1 (2018) |
Scientific Research and Development |
Sintering of Aluminum-Oxynitride Powder Prepared by Self-Propagating High-Temperature Synthesis |
|
| Том 59, № 1 (2018) |
Article |
Fuzed Periclase Grain Surface Modification with Coal-Tar Pitch |
|
| Том 59, № 1 (2018) |
Article |
High Density Boron Carbide Ceramics |
|
| Том 59, № 1 (2018) |
Article |
Dense Mulliteceramic Sintered by SPS and Its Behavior Under Thermal Shock |
|
| Том 59, № 1 (2018) |
Article |
Investigation of the Formation of a Fine-Crystalline Alumina Coating on the Surface of a Blank Aluminum Powder Coating Test Panel as a Result of its Filtration Combustion |
|
| Том 59, № 1 (2018) |
Article |
Improvement of Physical and Performance Characteristics of Carbon Graphite Lining by Lithium Additives |
|
| Том 59, № 1 (2018) |
Article |
Highly Porous Granulated Corundum Filler of Alumina-Foam Polystyrene Mixture. Part 5. Effect of Molding Mixture Fineness and Moisture Content on Filler Granulation Capacity and Physicotechnical Properties1 |
|
| Том 59, № 1 (2018) |
Article |
Nondestructive Testing of the Physicomechanical Properties of Zinc-Oxide Varistors Proposed by Different Manufacturers |
|
| Том 59, № 1 (2018) |
Article |
Research in the Field of Preparing Molded and Unmolded Refractories Based on High-Alumina HCBS. Part 14. Composition and Some Properties of Composite Composition Ceramic Concretes in the System Al2O3–SiO2–SiC–C1 |
|
| Том 59, № 1 (2018) |
Article |
Contemporary Methods for Modeling High-Temperature Systems1 |
|
| Том 59, № 1 (2018) |
Article |
Feasibility Assessment for Leucosapphire Production from Aluminum Oxide Prepared Electrochemically |
|
| Том 59, № 1 (2018) |
Article |
Corundum Refractory Material in Alumina-Binder Resistant to High-Temperature Deformation |
|
| Том 59, № 1 (2018) |
Article |
Formation of Composite Material Fiber-Reinforced Structure with Ceramic Aluminosilicate Matrix |
|
| Том 59, № 1 (2018) |
Article |
Study of Subsurface Layer Treatment During Liquid-Phase Impregnation of CCCM |
|
| Том 59, № 1 (2018) |
Article |
System of Operation of Ceramic Tools in the External Burnishing of Cylindrical Billets |
|
| Том 59, № 2 (2018) |
Refractories in Heating Units |
Increase in EAF Lining Life with Use of Hot-Briquetted Iron in a Charge |
|
| Том 59, № 2 (2018) |
Article |
Directly-Bonded Periclase-Chromite Refractory Corrosion Mechanism in an RH-Degasser Suction Pipe |
|
| Том 59, № 2 (2018) |
Scientific Research and Development |
Research in the Field of Composite Materials Based on HCBS and Refractory Materials Based on the System Al2O3–SiO2–SiC. Part 1 |
|
| Том 59, № 2 (2018) |
Article |
Slag – Refractory Interactions During Ilmenite Smelting: Thermodynamic Simulation and Experimental Data |
|
| Том 59, № 2 (2018) |
Article |
High-Alumina Heat-Insulating Materials Based on a Hydraulic Binder |
|
| Том 59, № 2 (2018) |
Article |
Highly Porous Granulated Corundum Filler of Alumina-Foam Polystyrene Mixture. Part 6. Optimization of Plate Granulator Operating Regime |
|
| Том 59, № 2 (2018) |
Article |
Structural Changes in Refractory Calcium Aluminate Cement Concrete |
|
| Том 59, № 2 (2018) |
Article |
Effect of SiC-Filler Refinement by Different Methods on Heat-Resistant Medium-Cement Concrete Properties |
|
| Том 59, № 2 (2018) |
Article |
Destruction of Graphitized Electrodes Under the Conditions of Thermal Shock |
|
| Том 59, № 2 (2018) |
Article |
Physical and Technological Aspects of Pulsed Laser Cutting of Cavities in Ceramics |
|
| Том 59, № 2 (2018) |
Article |
Sintering of Synthetic Magnesium Oxide |
|
| Том 59, № 2 (2018) |
Article |
Phase Composition and Microstructure of Reaction-Bonded Boron-Carbide Materials |
|
| Том 59, № 2 (2018) |
Article |
Mechanochemical Synthesis of Carbide Under Conditions of Vibration Treatment of Powders of Hafnium and Carbon Black |
|
| Том 59, № 2 (2018) |
Article |
Charge Activation Methods During Foam Glass-Ceramic Preparation |
|
| Том 59, № 2 (2018) |
Article |
Ceramics Based on Aluminum Titanate Synthesized by Using Solar Energy |
|
| Том 59, № 2 (2018) |
Article |
Thermal Conductivity and Wear Resistance of A359/(SiC + Si3N4) Hybrid Composites Prepared by Squeeze Casting |
|
| Том 59, № 2 (2018) |
Article |
Formation of Wear- and Corrosion-Resistant Coatings by the Microarc Oxidation of Aluminum |
|
| Том 59, № 2 (2018) |
Article |
Formation of Catalytically Active Metal-Ceramic Membranes for the Hybrid Reactor |
|
| Том 59, № 2 (2018) |
Article |
Comparative Analysis of the Properties of ZrO2–SiO2 and ZrO2–Al2O3–SiO2 Composition Fiber Composite Materials |
|
| Том 59, № 2 (2018) |
Article |
Refractory Corrosion Resistance in Molten Lead-Niobium Glass |
|
| Том 59, № 2 (2018) |
Article |
Rotary Furnace for Comparative Evaluation of Heating Unit Refractory Object Erosion Resistance |
|
| Том 59, № 3 (2018) |
Refractories in Heating Units |
Resistance of Refractories of the Al2O3–Cr2O3 System Under Liquid-Phase Reduction Conditions of Iron-Containing Technogenic Waste |
|
| Том 59, № 3 (2018) |
Article |
Improvement of the Process of Metal Casting and the Design of Refractory Equipment of the “Tundish Ladle – Open Jet – Mold” System of a Continuous Billet-Casting Machine |
|
| Том 59, № 3 (2018) |
Rawmaterials |
Refractory Composites Based on Pyrophyllite Raw Materials |
|
| Том 59, № 3 (2018) |
Scientific Research and Development |
Research in the Field of Composite Materials Based on HCBS and Refractory Materials Based on the System Al2O3–SiO2–SiC. Part 2 |
|
| Том 59, № 3 (2018) |
Article |
Effect of the Temperature Treatment of Quartzite on the Lining Resistance of Commercial-Frequency Induction Crucible Furnaces |
|
| Том 59, № 3 (2018) |
Article |
Preparation of Mullite–TiC–TiN Materials by a Spark Plasma Method with High Compaction Loading and Their Properties |
|
| Том 59, № 3 (2018) |
Article |
Effect of Mechanical Activation on a Mixture for Synthesizing Titanium Silicon Carbide |
|
| Том 59, № 3 (2018) |
Article |
Porous Cordierite Ceramic with Pore Formers of a Different Nature |
|
| Том 59, № 3 (2018) |
Article |
Highly Porous Granulated Corundum Filler of Alumina-Foam Polystyrene Mixture. Part 7. Study of the Possibility of Preparing Hollow Corundum Granules1 |
|
| Том 59, № 3 (2018) |
Article |
Features of Using Modified Carbon-Graphite Lining Materials in Aluminum Electrolyzers |
|
| Том 59, № 3 (2018) |
Article |
Physical and Technological Aspects of Precision Laser Treatment of Ceramic Materials. Effect of Treatment Regime |
|
| Том 59, № 3 (2018) |
Article |
Refractory Compositions Designed for Highly Heat-Resistant Ceramic Molds in Foundry Practice |
|
| Том 59, № 3 (2018) |
Article |
Structure and Phase Evolution in a SiC Ceramic Surface Layer During Electron-Beam Treatment |
|
| Том 59, № 3 (2018) |
Article |
Synthesis and Thermal Properties of Nano- and Macro-Crystalline Ceramic Materials Based on Bi5FeTi3O15 |
|
| Том 59, № 3 (2018) |
Article |
Non-Traditional Aluminous Binders: Correlation Between Properties and Composition |
|
| Том 59, № 3 (2018) |
Article |
Preparation of Inorganic Binder for Cold-Hardening Mixtures |
|
| Том 59, № 3 (2018) |
Article |
Structure and Phase Composition of Powder Prepared from Chemically Dispersed Aluminum-Molybdenum Alloy |
|
| Том 59, № 3 (2018) |
Article |
Effect of Surface Relief on the Stress-Strained State of the Main Si3N4-Ceramic Structural Elements with Steady-State Heat Transfer |
|
| Том 59, № 3 (2018) |
Ecology |
Investigation of the Distribution of Velocities of the Air Flow Swirling by a Rotating Exhaust Cylinder |
|
| Том 59, № 4 (2018) |
Production and Equipment |
Kaolin Raw Material Briquetting for Lump Chamotte Production |
|
| Том 59, № 4 (2018) |
Article |
Extraction of Associated Precious Metal from Building Industry Raw Material that is Difficult to Process |
|
| Том 59, № 4 (2018) |
Scientific Research and Development |
Effect of Additive Composition in the Al2O3–MgO–MnO System and Firing Temperature on Sintering of Composite Ceramic Based on Electromelted Corundum |
|
| Том 59, № 4 (2018) |
Article |
Sintering of Ceramic Materials Based on Bauxitized Clay of the North-Onezh Deposit. Part 1. Effect of Charge Grain Size Composition |
|
| Том 59, № 4 (2018) |
Article |
Phase Transformations of Concrete of the Al2O3–SiC–C System During Slag Resistance Testing |
|
| Том 59, № 4 (2018) |
Article |
Influence of Structure Modification of Silicon Carbide Materials on Their Dynamic Properties |
|
| Том 59, № 4 (2018) |
Article |
The Influence of High-Temperature Deformation on the Structure of Aluminum-Phosphate Composites |
|
| Том 59, № 4 (2018) |
Article |
Microstructure and Properties of the Mullite–ZrO2(Y2O3)–Si3N4-Composite Ceramics Sintered in by Different Methods |
|
| Том 59, № 4 (2018) |
Article |
Highly Porous Granulated Corundum Filler of Alumina-Foam Polystyrene Mixture. Part 8. Rational Drying and Firing Regimes for Crude Corundum Granules |
|
| Том 59, № 4 (2018) |
Article |
Porous Permeable Cermet Materials Based on Iron Oxides with Additions of Ground Polymetal Ores |
|
| Том 59, № 4 (2018) |
Article |
Evaluation of Ceramic Tool Reliability with a Limited Number of Tests Based on Established Wear Criteria |
|
| Том 59, № 4 (2018) |
Article |
Permeable Ceramic with Three-Fraction Electromelted Corundum Filler and Porcelain Binder |
|
| Том 59, № 4 (2018) |
Article |
Modeling Moisture Movement within Refractory Concrete During Drying by Means of Percolation Structures |
|
| Том 59, № 4 (2018) |
Article |
Study of the Phase and Mineralogical Properties of Converter Slag During Splashing to Improve Lining Resistance |
|
| Том 59, № 4 (2018) |
Article |
High-Temperature Transformations in Fibrous-Polymer Composites During Ablation Testing |
|
| Том 59, № 4 (2018) |
Article |
Self-Propagating High-Temperature Synthesis of N-Containing Material Based on Aluminum and Vanadium Nitrides for Producing Titanium Primary Alloys |
|
| Том 59, № 4 (2018) |
Article |
Assignment of the Abrasive-Jet Machining Mode of Si3N4-Ceramic Components Considering the Stress State of Various Surface-Layer Phases |
|
| Том 59, № 4 (2018) |
Article |
Pulsed Method of Rapid Cooling of Thermally Massive Bodies |
|
| Том 59, № 4 (2018) |
Ecology |
Numerical Analysis of Dust-Air Flows Near a Round Suction Unit, Screened by an Annular Swirling Jet. Part 1. Air-Jet Flows |
|
| Том 59, № 5 (2019) |
Refractories in Heating Units |
Use of Refractories in the Melting Tank of a High-Production-Capacity Glass Melting Furnace |
|
| Том 59, № 5 (2019) |
Article |
Experience of Using Chromium Oxide Materials in Electric Glass-Melting Furnaces |
|
| Том 59, № 5 (2019) |
Scientific Research and Development |
Research in the Field of Composite Materials Based on HCBS and Refractory Materials Based on the System Al2O3–SiO2–SiC. Part 31 |
|
| Том 59, № 5 (2019) |
Article |
Highly Refractory Alumina-Periclase-Carbon Ceramic Materials Based on a Spinel Binder |
|
| Том 59, № 5 (2019) |
Article |
Preparation of Porous Ceramic Based on Al2O3 as a Result of Zonal Compaction During Sintering of Powder Workpieces of Very Fine Aluminum Powder PAP-2 Combustion Products |
|
| Том 59, № 5 (2019) |
Article |
Structural Changes during Sintering of Al2O3 3D-Ceramics |
|
| Том 59, № 5 (2019) |
Article |
Microstructure and Properties of AA6082/(SiC + Graphite) Hybrid Composites |
|
| Том 59, № 5 (2019) |
Article |
Heat-Resistant Concrete Based on Alumina Cement from Substandard Raw Material |
|
| Том 59, № 5 (2019) |
Article |
Effect of Adding Cenospheres on Heat-Resistant Lightweight Concrete Properties |
|
| Том 59, № 5 (2019) |
Article |
Highly Porous Granulated Corundum Filler of Alumina-Foam Polystyrene Mixture. Part 9. Physicotechnical Properties of Porous Corundum Granules and Fillers Based on Them1 |
|
| Том 59, № 5 (2019) |
Article |
Comparative Analysis of Mobility and Compactability Indices for F240 Grinding Powders from Different Producers |
|
| Том 59, № 5 (2019) |
Article |
Selection of Ceramic Tools in the Production Preparation Stage Taking Account of Operating Properties |
|
| Том 59, № 5 (2019) |
Article |
Modeling of the Phase Composition of Refractory and Slag Systems, Optimization of Slag Adjustment, and Stabilization of Secondary Steelmaking Slags |
|
| Том 59, № 5 (2019) |
Article |
Ceramics Based on Reactively Sintered Boron Carbide |
|
| Том 59, № 5 (2019) |
Article |
Physical and Mechanical Properties of Hot-Pressed Materials of the ZrB2–TaC–SiC System |
|
| Том 59, № 5 (2019) |
Article |
Silicon Carbide Liquid-Phase Sintering with Various Activating Agents |
|
| Том 59, № 5 (2019) |
Article |
Combined Synthesis of Heterogeneous Powders in CaB6–TiB2 System |
|
| Том 59, № 5 (2019) |
Article |
Preparation and Properties of Reinforced Engineering Materials |
|
| Том 59, № 5 (2019) |
Article |
Effect of Pyrocatechin on the Properties of Cement-Free Refractory Concrete Mixtures Based on Silica-Containing Colloidal Binders |
|
| Том 59, № 5 (2019) |
Article |
Study of the Possibility of Preparing Low-Cement Magnesia Concretes |
|
| Том 59, № 5 (2019) |
Article |
Heat-Insulating Properties of High-Alumina Materials Filament-Reinforced with Glass Fiber of the Al2O3–SiO2 and Al2O3–SiO2–ZrO2 Systems |
|
| Том 59, № 5 (2019) |
Article |
Synthesis of a MoSi2-Based Powder Material Under the Influence of Pressure and Shearing |
|
| Том 59, № 5 (2019) |
Article |
Design of the Ceramic-Bladed End Milling Cutters with Regard for Their Stress-Strain State for the Innovation Technological Processes. Choice of Ceramics. Part 1 |
|
| Том 59, № 5 (2019) |
Article |
Service-Induced Damages of the Ceramic Thrust Bearing Pivot in the Seal Section of Electrical Centrifugal Pump System |
|
| Том 59, № 5 (2019) |
Ecology |
Numerical Analysis of the Dust-Air Current Near a Spherical Suction Unit Screened by a Circular Swirling Jet. Part 2. Dynamics of Dust Particles1 |
|
| Том 59, № 6 (2019) |
Refractories in Heating Units |
Effect of Deoxidation on Low-Alloy Steel Nonmetallic Inclusion Composition |
|
| Том 59, № 6 (2019) |
Raw Materials |
Refractory Materials Based on Secondary Resources and Phosphate Compounds |
|
| Том 59, № 6 (2019) |
Scientific Research and Development |
Sintering of Ceramic Materials Based on Bauxitized Clay of the North-Onezh Deposit. Part 2. Effect of Sintering Additions |
|
| Том 59, № 6 (2019) |
Article |
Study of Composites Based on Parkent Kaolinite Clay |
|
| Том 59, № 6 (2019) |
Article |
Effect of Melting Temperature Regimes on Change of Interplanar Distance in Quartzite |
|
| Том 59, № 6 (2019) |
Article |
Stabilization of ZrO2 Concentrate by Rare Earth Elements (La, Nd, Pr, Ce) |
|
| Том 59, № 6 (2019) |
Article |
Effect of Refractory Structure on Operating Properties |
|
| Том 59, № 6 (2019) |
Article |
Effect of Nano-Dispersed Iron Oxide Additions on Carbon Refractory Density Formation |
|
| Том 59, № 6 (2019) |
Article |
Selection of Refractory Materials for Electric Furnaces Used for Radioactive Waste Vitrification |
|
| Том 59, № 6 (2019) |
Article |
Production and Thermophysical Properties of BeO Ceramics with the Addition of Nanocrystalline Titanium Dioxide |
|
| Том 59, № 6 (2019) |
Article |
Spark Plasma Sintering of Al2O3-Ceramic Workpieces for Small End Milling Cutters |
|
| Том 59, № 6 (2019) |
Article |
Study of Modified Heat-Resistant Concrete in Relation to Type of Chamotte Filler |
|
| Том 59, № 6 (2019) |
Article |
Synthesis and Properties of Mullite–Sialon–ZrB2Materials Produced Using a Spark-Plasma Technique |
|
| Том 59, № 6 (2019) |
Article |
Periclase-Chromite Refractory Decomposition by a Coal – Gas Medium During Copper Sulfide Raw Material Processing |
|
| Том 59, № 6 (2019) |
Article |
Improving the Chemical Purity of Fused Corundum by High-Temperature Roasting |
|
| Том 59, № 6 (2019) |
Article |
Determination of Chemically Bound Water in Metakaolin |
|
| Том 59, № 6 (2019) |
Article |
Phase Formation in the Synthesis of Ti2AlN by Spark Plasma Sintering in the Ti/AlN System |
|
| Том 59, № 6 (2019) |
Article |
Heat-Reflecting Ceramic Materials Based on Potassium Polytitanate and Silicon Oxide |
|
| Том 59, № 6 (2019) |
Article |
Efficient Arrangement of Blanks Made of Oxide Ceramics in the Course of Jet-Abrasive Machining |
|
| Том 59, № 6 (2019) |
Ecology |
Investigation of the Dust-Air Flow Near a Vertical Rotating Cylindrical Local Exhaust |
|
| Том 59, № 6 (2019) |
Correction |
Correction to: System of Operation of Ceramic Tools in the External Burnishing of Cylindrical Billets |
|
| Том 59, № 6 (2019) |
Correction |
Correction to: Physical and Technological Aspects of Pulsed Laser Cutting of Cavities in Ceramics |
|
| Том 59, № 6 (2019) |
Correction |
Correction to: Physical and Technological Aspects of Precision Laser Treatment of Ceramic Materials. Effect of Treatment Regime |
|
| Том 59, № 6 (2019) |
Correction |
Correction to: Assignment of the Abrasive-Jet Machining Mode of Si3N4-Ceramic Components Considering the Stress State of Various Surface-Layer Phases |
|
| Том 60, № 1 (2019) |
Refractories in Heating Units |
Lining of the Rotary Kilns for Petroleum Coke Calcination |
|
| Том 60, № 1 (2019) |
Article |
Analysis of the Process of Casting of the Metal by an Open Stream and the Design of the Equipment of Receiving Chambers of the Tundish of CCM |
|
| Том 60, № 1 (2019) |
Production and Equipment |
Effect of the Flow of Transported Bulk Material on Design Features of a Belt Conveyor |
|
| Том 60, № 1 (2019) |
Heat Engineering |
Modeling of the Optical Properties of Vermiculite-Sungulite Conglomerates Subject to Thermal Activation in Electric Furnaces |
|
| Том 60, № 1 (2019) |
Article |
Energy Analysis of an Electric Furnace with Vibrating Hearth Aimed at Roasting Vermiculite Concentrates |
|
| Том 60, № 1 (2019) |
Scientific Research and Development |
Aluminum Oxide and Alumina Ceramics (review). Part 1. Properties of Al2O3 and Commercial Production of Dispersed Al2O3 |
|
| Том 60, № 1 (2019) |
Article |
Aluminum Oxide and Alumina Ceramics (Review). Part 2. Foreign Manufacturers of Alumina Ceramics. Technologies and Research in the Field of Alumina Ceramics1 |
|
| Том 60, № 1 (2019) |
Article |
Effect of Additives on Physicomechanical Properties of High-Strength AS-Materials |
|
| Том 60, № 1 (2019) |
Article |
Mechanism of Self-Propagating High-Temperature Synthesis of AlB2–Al2O3 Composite Powders |
|
| Том 60, № 1 (2019) |
Article |
Effect of Firing Regime on the Structure and Properties of Highly Porous Ceramic Materials Based on Alumina-Magnesia Spinel |
|
| Том 60, № 1 (2019) |
Article |
Corrosion and Oxidation of Silicon Carbide Based on a Nitride Binder in an Aluminum Electrolyzer Side Lining |
|
| Том 60, № 1 (2019) |
Article |
Effect of Quartzite Heat Treatment on Induction Furnace Lining Failure Mechanism |
|
| Том 60, № 1 (2019) |
Article |
Study of Refractory Degradation Under Action of Cyclic Thermal Loads |
|
| Том 60, № 1 (2019) |
Article |
Optimization of Raw Material Mixes in Studying Mixed Cements and Their Physicomechnical Properties |
|
| Том 60, № 1 (2019) |
Article |
Correlation of Al2O3-Ceramic Structure with the Mechanism of Surface Layer Formation for Workpieces During Diamond Grinding |
|
| Том 60, № 1 (2019) |
Article |
Mullite–TiC–c-BN–c-ZrO2 materials Produced by Spark-Plasma Sintering and Their Properties |
|
| Том 60, № 1 (2019) |
Article |
Carbon Nanotubes for the Synthesis of Ceramic Matrix Composites (Cleaning, Dispersion, Surface Modification) (Review) |
|
| Том 60, № 1 (2019) |
Article |
Properties of Different Aluminum Oxide Powders and Ceramics Made from Them |
|
| Том 60, № 1 (2019) |
Article |
Physicochemical Transformations During Low-Temperature Synthesis of Zirconium Carbide |
|
| Том 60, № 1 (2019) |
Article |
Solid Solutions Ca12Al14O33±δ: V5+, Mo5+ |
|
| Том 60, № 1 (2019) |
Article |
Genesis of Ecotechnology Efficiency in the Production of Dust-Forming Materials |
|
| Том 60, № 1 (2019) |
Article |
Introduction to Ceramic Micromechanics. Ceramic Object Operating System |
|
| Том 60, № 1 (2019) |
Ecology |
The Influence of Carbon Sorbent Surface Properties on the Adsorption of Poly- and Heterocyclic Aromatic Hydrocarbons |
|
| Том 60, № 2 (2019) |
Refractories in Heating Units |
Development and Implementation of an Innovative Metal Receiver for a Slab CBCM Tundish |
|
| Том 60, № 2 (2019) |
Article |
Optimized Processes for Flame Guncreting and Effective Guncrete Mortars for Hot Repairs to Non-Ferrous Metallurgy Equipment |
|
| Том 60, № 2 (2019) |
Production and Equipment |
Resolution of the Problem of Expanded Clay Rubble Dust Formation |
|
| Том 60, № 2 (2019) |
Scientific Research and Development |
Research in the Field of Composite Materials Based on HCBS and Refractory Materials Based on the System Al2O3–SiO2–SiC. Part 41 |
|
| Том 60, № 2 (2019) |
Article |
Physicomechanical Properties and Phase Composition of Unfired Periclase-Carbon Refractories Based on Modified Phenol-Formaldehyde Resin |
|
| Том 60, № 2 (2019) |
Article |
Effect of Spark Plasma Sintering Temperature on the Properties of Transparent YSZ Ceramics |
|
| Том 60, № 2 (2019) |
Article |
Cerium Dioxide-Based High Temperature Heaters for Operation in Air |
|
| Том 60, № 2 (2019) |
Article |
Properties of Ceramics Obtained Based on Mechanically Mixed Powders of Zirconium Hydroxide and a Dopant |
|
| Том 60, № 2 (2019) |
Article |
Evaluation of the Crack Resistance of Reactive Sintered Composite Boron Carbide-Based Materials |
|
| Том 60, № 2 (2019) |
Article |
Reduction of Alkali Content in Nepheline Sludge for the Production of Heat-Resistant Insulating Materials From it |
|
| Том 60, № 2 (2019) |
Article |
Impulse Laser Effect on Graphitized Surface of Y–TZP-Ceramics |
|
| Том 60, № 2 (2019) |
Article |
Oxide and Alumina Ceramics (Review). Part 3. Russian Manufacturers of Alumina Ceramics1 |
|
| Том 60, № 2 (2019) |
Article |
Effect of Hercynite Spinel on the Technological Properties of MCZ Products Used for Lining Cement Rotary Kilns |
|
| Том 60, № 2 (2019) |
Article |
Composite Ceramic Based on Silicon Carbide |
|
| Том 60, № 2 (2019) |
Article |
Engineering Ceramics: Materials and Objects, Principles of Composition, Structure, and Property Formation |
|
| Том 60, № 2 (2019) |
Article |
Preparation of Light-Weight Refractory Based on Nonferrous Metallurgy and Oil Recovery Waste |
|
| Том 60, № 2 (2019) |
Article |
Features Determining the Melting Temperature of Slag-Forming Mixtures for Steel Continuous Casting |
|
| Том 60, № 2 (2019) |
Article |
Structure Formation in Ti/Ti–Al–C Layered Ceramic Materials Obtained by the Method of Unconfined SHS Compaction |
|
| Том 60, № 2 (2019) |
Article |
Influence of the Mechanical Activation of Reaction Mixture on the Formation of Microstructure of ZrB2–CrB Composites Obtained by Electrothermal Explosions under Pressure |
|
| Том 60, № 2 (2019) |
Article |
Design of Ceramic End Cutters for Innovative Technological Processes Performed with Regard for Their Stress-Strain State. The Choice of Ceramics. Part 2 |
|
| Том 60, № 2 (2019) |
Ecology |
Simulation of the Dust-Air Flow Near a Rotating Disk Cylinder Suction Unit |
|
| Том 60, № 3 (2019) |
Raw Materials |
Acidic Methods of Alumina Production (Review) |
|
| Том 60, № 3 (2019) |
Article |
Prospective Technogenic Mineral Resources for Refractory Production |
|
| Том 60, № 3 (2019) |
Heat Engineering |
Simulation of Radiant Heat Transfer to a Flow of Vermiculite in An Electric Vibrating-Hearth Furnace |
|
| Том 60, № 3 (2019) |
Scientific Research and Development |
Highly Reactive Magnesia Production: Modeling and Experiment |
|
| Том 60, № 3 (2019) |
Article |
Preparation and Properties of Fused Zircon |
|
| Том 60, № 3 (2019) |
Article |
Free SHS-Compression Method for Producing Large-Sized Plates from Ceramic Materials |
|
| Том 60, № 3 (2019) |
Article |
Production of Multichannel Ceramics Based on Ti3SiC2 |
|
| Том 60, № 3 (2019) |
Article |
Application Method for Protective and Electrical Insulating Ceramic Coatings by Microarc Oxidation Under Excess Pressure Conditions |
|
| Том 60, № 3 (2019) |
Article |
Permeable Cermet SHS-Materials Based on Alloy-Steel Scale and Ilmenite for Cleaning Diesel Engine Exhaust Gases |
|
| Том 60, № 3 (2019) |
Article |
Features of Determining Ceramic Material Porous Structure Parameters |
|
| Том 60, № 3 (2019) |
Article |
Tribological Aspect in Technological Assurance of Ceramic Component Quality |
|
| Том 60, № 3 (2019) |
Article |
Sintering a Mixture of Powders in the Al2O3–SiO2–β-SiAlON–TiC–Dy2O3 System by the Spark-Plasma Method with High Compaction Loading |
|
| Том 60, № 3 (2019) |
Article |
Structure, Properties, and Applications of Graphite-Like Hexagonal Boron Nitride |
|
| Том 60, № 3 (2019) |
Article |
Improvement of Concrete Heat Resistance |
|
| Том 60, № 3 (2019) |
Article |
Design of Ceramic-Bladed End Milling Cutters with Regard for Their Stress-Strain State for Innovative Production Processes. Choice of Ceramics. Part 33 |
|
| Том 60, № 3 (2019) |
Article |
Effect of Iron-Compound Additives on Self-Propagating High-Temperature Synthesis of Si2N2O |
|
| Том 60, № 3 (2019) |
Article |
Features of the Preparation and Study of Electrophysical Characteristics (BeO+TiO2)-Ceramics by Impedance Spectroscopy |
|
| Том 60, № 3 (2019) |
Ecology |
Environmental Technology for the Integrated Disposal of Man-Made Wastes of the Metallurgical Industry: Self-Curing, Chemically Resistant Refractory Mass1 |
|
| Том 60, № 4 (2019) |
Refractories in Heating Units |
Design and Methods for the Numerical Analyses of the Refractory Equipment of Tundish Ladle of a Continuous Casting Machine |
|
| Том 60, № 4 (2019) |
Heat Engineering |
Experimental and Numerical Study of the Formation of Thermophysical Characteristics of Carbon Composite Materials. Part 1. Formation of the thermophysical Characteristics of a Carbon Composite Material |
|
| Том 60, № 4 (2019) |
Article |
Experimental and Numerical Study of the Formation of Thermophysical Characteristics of Carbon Composite Materials. Part 2. Numerical Simulation of Operability of a Refractory Product Made of Carbon Composite Material |
|
| Том 60, № 4 (2019) |
Scientific Research and Development |
Properties of Ceramics Based on Al2o3 with Admixture of Unltradispersed Powder of Al2o3 Synthesized by the Electrochemical Method |
|
| Том 60, № 4 (2019) |
Article |
High-Alumina Mixes Based on Molded Bauxite Suspensions |
|
| Том 60, № 4 (2019) |
Article |
Preparation of Porous Permeable Ceramic Based on Silicon Carbide for Hot Flue Gas Filtration (Review) |
|
| Том 60, № 4 (2019) |
Article |
Unmolded Diatomite Based Heat Insulating Material for Aluminum Alloys |
|
| Том 60, № 4 (2019) |
Article |
Preparation and Properties of Lightweight Refractories Based on Microporous Calcined Alumina |
|
| Том 60, № 4 (2019) |
Article |
Chamotte-Free Heat Insulation from Self-Consolidating Mixes Based on Burn-Off Additive of Plant Origin. Part 1. Selection of Burn-Off Additive of Plant Origin for Self-Consolidation of Mixes Within a Hydraulically Closed Volume |
|
| Том 60, № 4 (2019) |
Article |
Study of the Limiting Shear Stress of Pyrophyllite – Clay Component – Water Composition at Elevated Temperature |
|
| Том 60, № 4 (2019) |
Article |
Analysis of Occurrence, Properties, and Methods of Minimizing Production Defects in Ceramic Composites with an Sic-Matrix Prepared by Liquid-Phase Siliciding |
|
| Том 60, № 4 (2019) |
Article |
Preparation of MoSi2–SiC–ZrB2 Structural Ceramics by Free Sintering |
|
| Том 60, № 4 (2019) |
Article |
Synthesis of LaB6–ZrB2 Powder Mixture by Borothermal Reduction of La(OH)3 and ZrO(OH)2 Coprecipitated in Boron Suspension |
|
| Том 60, № 4 (2019) |
Article |
On the Synthesis Mechanism of TiN, ZrN, and HfN During Combustion of Mixtures of Aluminum Nanopowder with TiO2, ZrO2, and HfO2 |
|
| Том 60, № 4 (2019) |
Article |
Technology of Cordierite Ceramics for the Production of Catalysts |
|
| Том 60, № 4 (2019) |
Article |
Young’s Modulus of Corundum Ceramics Sintered from Powders with a Core-Shell Structure Synthesized by Iodine Transport |
|
| Том 60, № 4 (2019) |
Article |
Development of a Membrane for Hydrocarbon Dehydrogenation Using High-Temperature Synthesis |
|
| Том 60, № 4 (2019) |
Article |
Technological Principles of Controlling the Formation of Non-Metallic Inclusions in Carbon and Low Alloy Steels to Increase their Corrosion Resistance in Aqueous Media |
|
