Email this article Influence of the Orientation of a Discharge Channel in Water on the Kinematics of Plate Deflection
- Authors: Kosenkov V.M.1, Kuz’menko V.G.1
-
Affiliations:
- Institute of Pulse Processes and Technologies
- Issue: Vol 54, No 3 (2018)
- Pages: 261-266
- Section: Article
- URL: https://bakhtiniada.ru/1068-3755/article/view/230711
- DOI: https://doi.org/10.3103/S1068375518030079
- ID: 230711
Cite item
Open Access
Access granted
Subscription Access
Abstract
The influence of orientation of a discharge channel in water and the length of a cylindrical discharge chamber on the kinematic characteristics of the maximum deflection of plates during molding into an open ring matrix have been studied experimentally. The optical method is used to measure the deflection of the plate deformed by pressure waves generated by an electric discharge in water. No significant effect of the discharge channel orientation and relative length of the cylindrical discharge chamber on the plate deflection is detected.
About the authors
V. M. Kosenkov
Institute of Pulse Processes and Technologies
Author for correspondence.
Email: v.m.kosenkov@gmail.com
Ukraine, Nikolaev, 54018
V. G. Kuz’menko
Institute of Pulse Processes and Technologies
Email: v.m.kosenkov@gmail.com
Ukraine, Nikolaev, 54018
Supplementary files
