The Influence of Dimesions and Phase State of Structural Elements on Mechanical Properties of Binary Alloys of the Ti–Nb and Zr–Nb Systems

Resumo

The results of investigation of the influence of the structural element size and phase state of the Ti – 45 wt.% Nb and Zr – 1 wt.% Nb binary alloys on their mechanical properties are presented. The structural states of the alloys with the structural elements of different dimensions were formed from the ultrafine-grained state via annealing. The curves of dependence of the yield strength and microhardness on the average size of the structural elements, d –^1/2, are obtained using the Hall–Petch relation. It is shown that for the Zr – 1 wt.% Nb alloy, the Hall–Petch relation is fulfilled in the entire range of sizes under study, from ultrafine-grained to finegrained states 0.2–1.9 μm. For the Ti – 45 wt.% Nb alloy, in the analysis of the Hall–Petch relationship within the structural element size range 0.43–45 μm, its phase composition is taken into consideration, specifically, the presence of dispersion-strengthened β-phase grains, α-phase subgrains, nonequilibrium nanosized ω- phase, and the bimodal grain-subgrain structure.