Отправить статью по E-mail Mechanosynthesis of Precursors for TiC–Cu Cermets
- Авторы: Eremina M.A.1, Lomaeva S.F.1, Burnyshev I.N.1, Kalyuzhnyi D.G.1
-
Учреждения:
- Udmurt Scientific Center of the Ural Branch of the Russian Academy of Science
- Выпуск: Том 60, № 12 (2018)
- Страницы: 2155-2163
- Раздел: Article
- URL: https://bakhtiniada.ru/1064-8887/article/view/239847
- DOI: https://doi.org/10.1007/s11182-018-1340-7
- ID: 239847
Цитировать
Открытый доступ
Доступ предоставлен
Только для подписчиков
Аннотация
The structural and phase state of the samples obtained by co-grinding of Ti and Cu powders under different conditions (with graphite, in petroleum ether, and in xylene) is investigated. It is demonstrated that after thermal treatment of powders obtained by milling of titanium, copper, and graphite in petroleum ether, both cubic titanium carbide and hexagonal titanium carbohydride are formed, whereas by milling without graphite, only hexagonal carbohydride possessing high thermal stability is formed. CuTi and CuTi2 intermetallic phases are formed under all examined conditions of mechanosynthesis.
Ключевые слова
Об авторах
M. Eremina
Udmurt Scientific Center of the Ural Branch of the Russian Academy of Science
Автор, ответственный за переписку.
Email: mrere@mail.ru
Россия, Izhevsk
S. Lomaeva
Udmurt Scientific Center of the Ural Branch of the Russian Academy of Science
Email: mrere@mail.ru
Россия, Izhevsk
I. Burnyshev
Udmurt Scientific Center of the Ural Branch of the Russian Academy of Science
Email: mrere@mail.ru
Россия, Izhevsk
D. Kalyuzhnyi
Udmurt Scientific Center of the Ural Branch of the Russian Academy of Science
Email: mrere@mail.ru
Россия, Izhevsk
Дополнительные файлы
