Formation of a periodic diffractive structure based on poly(methyl methacrylate) with ion-implanted silver nanoparticles


Citar

Texto integral

Acesso aberto Acesso aberto
Acesso é fechado Acesso está concedido
Acesso é fechado Somente assinantes

Resumo

We propose to form optical diffractive elements on the surface of poly(methyl methacrylate) (PMMA) by implanting the polymer with silver ions (E = 30 keV; D = 5.0 × 1014 to 1.5 × 1017 ion/cm2; I = 2 μA/cm2) through a nickel grid (mask). Ion implantation leads to the nucleation and growth of silver nanoparticles in unmasked regions of the polymer. The formation of periodic surface microstructures during local sputtering of the polymer by incident ions was monitored using an optical microscope. The diffraction efficiency of obtained gratings is demonstrated under conditions of their probing with semiconductor laser radiation in the visible spectral range.

Sobre autores

M. Galyautdinov

Kazan E.K. Zavoisky Physical Technical Institute

Email: aanstep@gmail.com
Rússia, Kazan, Tatarstan, 420029

V. Nuzhdin

Kazan E.K. Zavoisky Physical Technical Institute

Email: aanstep@gmail.com
Rússia, Kazan, Tatarstan, 420029

Ya. Fattakhov

Kazan E.K. Zavoisky Physical Technical Institute

Email: aanstep@gmail.com
Rússia, Kazan, Tatarstan, 420029

B. Farrakhov

Kazan E.K. Zavoisky Physical Technical Institute

Email: aanstep@gmail.com
Rússia, Kazan, Tatarstan, 420029

V. Valeev

Kazan E.K. Zavoisky Physical Technical Institute

Email: aanstep@gmail.com
Rússia, Kazan, Tatarstan, 420029

Yu. Osin

Kazan Federal University

Email: aanstep@gmail.com
Rússia, Kazan, Tatarstan, 420008

A. Stepanov

Kazan E.K. Zavoisky Physical Technical Institute; Kazan Federal University; Kazan National Research Technological University

Autor responsável pela correspondência
Email: aanstep@gmail.com
Rússia, Kazan, Tatarstan, 420029; Kazan, Tatarstan, 420008; Kazan, Tatarstan, 420015

Arquivos suplementares

Arquivos suplementares
Ação
1. JATS XML

Declaração de direitos autorais © Pleiades Publishing, Ltd., 2016