Novel Oxide Coatings on Single-Crystal Sapphire and Sintered Ceramics


Cite item

Full Text

Open Access Open Access
Restricted Access Access granted
Restricted Access Subscription Access

Abstract

The formation of the protective and hardening oxide coatings on the surface of the single-crystal sapphire and sintered corundum (ceramics) is studied. Corundum systems with oxide coatings are as yet unknown and our studies are original. The compositions of the coating based on the mixture of Al2O3 and B2O3 oxides and a technique of their deposition on the samples are worked out. The strength of the samples during the bending test is studied. It is shown that the hardening of several samples achieves ~30% and microhardness (HV) reaches 30 GPa. Basing on the results of an investigation of the significant number of the samples obtained under different conditions, it is concluded that the developed method of the protection and hardening of the corundum products is promising.

About the authors

V. N. Gurin

Ioffe Physical Technical Institute

Author for correspondence.
Email: vladimir.gurin@mail.ioffe.ru
Russian Federation, St. Petersburg, 194021

V. M. Krymov

Ioffe Physical Technical Institute

Email: vladimir.gurin@mail.ioffe.ru
Russian Federation, St. Petersburg, 194021

V. V. Shpeizman

Ioffe Physical Technical Institute

Email: vladimir.gurin@mail.ioffe.ru
Russian Federation, St. Petersburg, 194021

A. B. Sinani

Ioffe Physical Technical Institute

Email: vladimir.gurin@mail.ioffe.ru
Russian Federation, St. Petersburg, 194021

M. F. Kireenko

Ioffe Physical Technical Institute

Email: vladimir.gurin@mail.ioffe.ru
Russian Federation, St. Petersburg, 194021

A. I. Averkin

Ioffe Physical Technical Institute

Email: vladimir.gurin@mail.ioffe.ru
Russian Federation, St. Petersburg, 194021

L. I. Derkachenko

Ioffe Physical Technical Institute

Email: vladimir.gurin@mail.ioffe.ru
Russian Federation, St. Petersburg, 194021

Supplementary files

Supplementary Files
Action
1. JATS XML

Copyright (c) 2018 Pleiades Publishing, Ltd.