Email this article The efficiency of backward magnetic-pulse processing
- Authors: Kudasov Y.B.1,2,3, Maslov D.A.1,2,3, Surdin O.M.1,2,3
-
Affiliations:
- Sarov Physicotechnical Institute
- National Research Nuclear University MEPhI
- All-Russia Research Institute of Experimental Physics
- Issue: Vol 43, No 1 (2017)
- Pages: 92-94
- Section: Article
- URL: https://bakhtiniada.ru/1063-7850/article/view/202635
- DOI: https://doi.org/10.1134/S1063785017010217
- ID: 202635
Cite item
Open Access
Access granted
Subscription Access
Abstract
The dependence of the efficiency of magnetic-pulse processing of materials on the pulsed magnetic-field shape has been studied. It is shown that, by using a pulse train instead of a single pulse in the fast-rising component of a magnetic field applied during the backward forming process, it is possible to increase the specific mechanical impulse transferred to a workpiece and, thus, improve the efficiency of processing. Possible applications of the proposed method to removing dents from car chassis and aircraft parts are considered
About the authors
Yu. B. Kudasov
Sarov Physicotechnical Institute; National Research Nuclear University MEPhI; All-Russia Research Institute of Experimental Physics
Email: mossom1@rambler.ru
Russian Federation, Sarov, Nizhny Novgorod oblast, 607186; Moscow, 115409; Sarov, Nizhny Novgorod oblast, 607188
D. A. Maslov
Sarov Physicotechnical Institute; National Research Nuclear University MEPhI; All-Russia Research Institute of Experimental Physics
Email: mossom1@rambler.ru
Russian Federation, Sarov, Nizhny Novgorod oblast, 607186; Moscow, 115409; Sarov, Nizhny Novgorod oblast, 607188
O. M. Surdin
Sarov Physicotechnical Institute; National Research Nuclear University MEPhI; All-Russia Research Institute of Experimental Physics
Author for correspondence.
Email: mossom1@rambler.ru
Russian Federation, Sarov, Nizhny Novgorod oblast, 607186; Moscow, 115409; Sarov, Nizhny Novgorod oblast, 607188
Supplementary files
