Email this article Dynamic Strength of a Titanium Alloy with an Electron-Beam-Modified Surface
- Authors: Savenkov G.G.1,2, Kuznetsov A.V.1, Bragov A.M.3
-
Affiliations:
- Armalit Machine-Building Plant
- St. Petersburg State Institute of Technology (Technical University)
- Research Institute of Mechanics
- Issue: Vol 63, No 5 (2018)
- Pages: 718-722
- Section: Physical Science of Materials
- URL: https://bakhtiniada.ru/1063-7842/article/view/201393
- DOI: https://doi.org/10.1134/S1063784218050201
- ID: 201393
Cite item
Open Access
Access granted
Subscription Access
Abstract
Data are presented of plane-wave experiments aimed at determining the dynamic strength of 3M titanium alloy with a surface processed by a microsecond electron beam. It has been found that the dynamic strength of processed specimens is higher than that of unprocessed specimens. Metallographic examination of test specimens has revealed spallation macrofracture inside the unprocessed specimens and spallation microfracture at the interface between the hardened layer and the substrate in the beam-processed specimens.
About the authors
G. G. Savenkov
Armalit Machine-Building Plant; St. Petersburg State Institute of Technology (Technical University)
Author for correspondence.
Email: sav-georgij@yandex.ru
Russian Federation, St. Petersburg, 198097; St. Petersburg, 190013
A. V. Kuznetsov
Armalit Machine-Building Plant
Email: sav-georgij@yandex.ru
Russian Federation, St. Petersburg, 198097
A. M. Bragov
Research Institute of Mechanics
Email: sav-georgij@yandex.ru
Russian Federation, Nizhny Novgorod, 603950
Supplementary files
