Fine-grained structure and properties of a Ni2MnIn alloy after a settling plastic deformation

Resumo

The structure and properties of a polycrystalline Ni–Mn–In Heusler alloy have been studied after a plastic deformation by upsetting. An analysis of points of a martensitic and magnetic phase transformations shows that the martensite transformation takes place at temperatures lower than the Curie point. At high temperatures in the range 930–1110 K the alloy undergoes the phase transformation of ordered phase L2₁ to disordered phase B2, and the melting temperature of the alloy is 1245 K. The flow curves of the alloy cylindrical samples at temperatures 773, 873, and 973 K have been built. An analysis of the alloy microstructure after upsetting at a temperature of 773 K leads to the conclusion that many macrocracks are initiated in the sample. The treatment at 873 and 973 K causes a fragmentation of the grains with grain sizes from several to several dozen micrometers. However, the upsetting at 873 K leads to insignificant scatter in the grain sizes, and the microstructure is more homogeneous and worked out.