Distribution of boron between oxide slag and steel

详细

The influence of silicon (0.1–0.8%), aluminum (0.005%), and carbon (0.1%) in steel on the reduction of boron from slag (basicity 5) at 1400–1700°C is studied by thermodynamic analysis on the basis of HSC 6.1 Chemistry software (Outokumpu). Experiments on the boron distribution between CaO–SiO₂–MgO–Al₂O₃–B₂O₃ slag and steel are conducted in a high-temperature Tamman resistance furnace. Low-carbon steel with different silicon content is employed. According to the thermodynamic modeling and the experiments, direct microalloying of steel with boron is possible on the basis of its reduction by the silicon present in the steel. The reduction of boron from slag by silicon is theoretically analyzed and experimentally confirmed. The results of thermodynamic modeling indicate that boron may be reduced from CaO–SiO₂–MgO–Al₂O₃–B₂O₃ slag by silicon despite its low content in the steel (0.1–0.8%). With increase in the initial Si content in the steel, the boron concentration in the steel also increases. The influence of the Si content and the steel temperature on the final boron content is studied. When steel is held under slag containing 4.3% B₂O₃, the boron is reduced, mainly by silicon, whose content in the steel is 15–22% lower after the experiment. More boron is present in the steel sample with an elevated Si content. The degree of assimilation of boron is 5.8–6.9%; this is consistent with the thermodynamic modeling. The boron content in the metal may be regulated by adjusting the temperature and the silicon content of the steel. On the basis of the results, a technology for the direct microalloying of steel with boron may be developed.