Email this article Improvement in Blast-Furnace Performance by Using a New Form of Iron Ore
- Authors: Lyalyuk V.P.1, Tarakanov A.K.2, Zhuravlev F.M.1, Kassim D.A.1, Chuprinov E.V.1
-
Affiliations:
- Krivoy Rog Metallurgical Institute
- Ukrainian National Metallurgical Academy
- Issue: Vol 48, No 1 (2018)
- Pages: 39-44
- Section: Article
- URL: https://bakhtiniada.ru/0967-0912/article/view/179948
- DOI: https://doi.org/10.3103/S0967091218010096
- ID: 179948
Cite item
Open Access
Access granted
Subscription Access
Abstract
The effective blast-furnace smelting of iron requires the use of uniform fluxed iron ore in sintered form—local cakes produced by the production of pellets with a high content of iron and residual carbon, minimal content of silica, high cold strength, and high strength in the blast furnace. The proposed new material combines the best metallurgical properties of sinter and pellets.
Keywords
About the authors
V. P. Lyalyuk
Krivoy Rog Metallurgical Institute
Author for correspondence.
Email: vitalij.lyalyuk@gmail.com
Ukraine, Krivoy Rog
A. K. Tarakanov
Ukrainian National Metallurgical Academy
Email: vitalij.lyalyuk@gmail.com
Ukraine, Dnepr
F. M. Zhuravlev
Krivoy Rog Metallurgical Institute
Email: vitalij.lyalyuk@gmail.com
Ukraine, Krivoy Rog
D. A. Kassim
Krivoy Rog Metallurgical Institute
Email: vitalij.lyalyuk@gmail.com
Ukraine, Krivoy Rog
E. V. Chuprinov
Krivoy Rog Metallurgical Institute
Email: vitalij.lyalyuk@gmail.com
Ukraine, Krivoy Rog
Supplementary files
