Titanium alloys in hip arthroplasty

I. V. Zagorodny; Загородный И. В.; A. A. Ilyin; Ильин А. А.; V. N. Karpov; Карпов В. Н.; A. M. Nadezhin; Надежин А. М.; S. V. Skvortsova; Скворцова С. В.; S. V. Sergeev; Сергеев С. В.; A. A. Plushev; Плющев А. А.; N. S. Gavryushenko; Гаврюшенко Н. С.

doi:10.17816/vto104258

Titanium alloys in hip arthroplasty

作者: Zagorodny I.V.¹^,2^,3^,4, Ilyin A.A.¹^,2^,3^,4, Karpov V.N.¹^,2^,3^,4, Nadezhin A.M.¹^,2^,3^,4, Skvortsova S.V.¹^,2^,3^,4, Sergeev S.V.¹^,2^,3^,4, Plushev A.A.¹^,2^,3^,4, Gavryushenko N.S.¹^,2^,3^,4
隶属关系:
1. Peoples' Friendship University of Russia
2. "MATI"—Russian State Technical University named after A.I. K.E. Tsiolkovsky
3. CJSC "Implant MT"
4. Central Institute of Traumatology and Orthopedics. N.N. Priorov
期: 卷 7, 编号 2 (2000)
页面: 73-76
栏目: Original study articles
URL: https://bakhtiniada.ru/0869-8678/article/view/104258
DOI: https://doi.org/10.17816/vto104258
ID: 104258

如何引用文章

全文:

详细
全文:
作者简介
参考
补充文件
统计

详细

Experimental study of thermal-hydrogenous processing influence on the structure, mechanical and tribologic properties of titanium-alloy «ѴТ6» was performed. After processing the firmness of alloy was increased up to 40-42 un. HRC in comparison with 28 un. HRC in hot rolling condition. Friction coefficient of VT6 alloy head on extra high molecular polyethylene was similar to the friction coefficient of Co-Cr-Mo alloy head. Wear of extra high molecular polyethylene in couple with titanium-alloy was 5 times lower than in couple with Co-Cr-Mo alloy. Surface hardening of VT6 alloy by thermal-hydrogenous processing 10 times decreases the wear of bone cement at friction. On the base of experimental study the new cemented hip endoprosthesis «SFEN» was elaborated.

关键词

titanium alloys, endoprosthesis, hip joint

全文:

##article.viewOnOriginalSite##

作者简介

I. Zagorodny

Peoples' Friendship University of Russia; "MATI"—Russian State Technical University named after A.I. K.E. Tsiolkovsky; CJSC "Implant MT"; Central Institute of Traumatology and Orthopedics. N.N. Priorov

编辑信件的主要联系方式.
Email: info@eco-vector.com
俄罗斯联邦, Moscow; Moscow; Moscow; Moscow