Enviar artigo por via de e-mail Local Physicomechanical Properties of Materials for Use in Calibration of Nanoindentation Instruments
- Autores: Golovin Y.I.1, Tyurin A.I.1, Aslanyan E.G.2, Pirozhkova T.S.1, Vorob’ev M.O.1
-
Afiliações:
- Nanotechnologies and Nanomaterials Education and Research Center, Tambov State University
- All-Russia Research Institute of Physicotechnical and Radio Measurements (VNIIFTRI)
- Edição: Volume 59, Nº 9 (2016)
- Páginas: 911-915
- Seção: Article
- URL: https://bakhtiniada.ru/0543-1972/article/view/245485
- DOI: https://doi.org/10.1007/s11018-016-1066-2
- ID: 245485
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
Studies of variations in the hardness of representative materials of different classes over broad ranges of loads and depths of indentation are carried out. The usability of these materials is demonstrated and boundaries on the ranges of use of hardness meters produced from these materials for calibration of nanoindentation instruments are established.
Palavras-chave
Sobre autores
Yu. Golovin
Nanotechnologies and Nanomaterials Education and Research Center, Tambov State University
Autor responsável pela correspondência
Email: golovin@tsu.tmb.ru
Rússia, Tambov
A. Tyurin
Nanotechnologies and Nanomaterials Education and Research Center, Tambov State University
Email: golovin@tsu.tmb.ru
Rússia, Tambov
E. Aslanyan
All-Russia Research Institute of Physicotechnical and Radio Measurements (VNIIFTRI)
Email: golovin@tsu.tmb.ru
Rússia, Mendeleevo, Moscow District
T. Pirozhkova
Nanotechnologies and Nanomaterials Education and Research Center, Tambov State University
Email: golovin@tsu.tmb.ru
Rússia, Tambov
M. Vorob’ev
Nanotechnologies and Nanomaterials Education and Research Center, Tambov State University
Email: golovin@tsu.tmb.ru
Rússia, Tambov
Arquivos suplementares
