Email this article Theoretical Foundations for Creating an Electric Field Strength Reference Using a Transducer with a High-Frequency Connector
- Authors: Tishchenko V.A.1, Luk’yanov V.I.1
-
Affiliations:
- All-Russia Research Institute of Physicotechnical and Radio Measurements (VNIIFTRI)
- Issue: Vol 59, No 2 (2016)
- Pages: 153-159
- Section: Electromagnetic Measurements
- URL: https://bakhtiniada.ru/0543-1972/article/view/245748
- DOI: https://doi.org/10.1007/s11018-016-0934-0
- ID: 245748
Cite item
Open Access
Access granted
Subscription Access
Abstract
A model is considered of a reference electric field strength transducer with a high-frequency connector. Strength measurement equations are obtained using the reference field and reference antenna methods. Relations are presented for expressing the effective length and resistance of a dipole antenna in terms of reflection and transmission factors, which may be measured with a circuit analyzer.
Keywords
About the authors
V. A. Tishchenko
All-Russia Research Institute of Physicotechnical and Radio Measurements (VNIIFTRI)
Author for correspondence.
Email: otd200@vniiftri.ru
Russian Federation, Mendeleevo, Moscow Oblast
V. I. Luk’yanov
All-Russia Research Institute of Physicotechnical and Radio Measurements (VNIIFTRI)
Email: otd200@vniiftri.ru
Russian Federation, Mendeleevo, Moscow Oblast
Supplementary files
