Email this article Measurements of the Geometric Parameters of Thread Gauges
- Authors: Zakharenko Y.G.1, Kononova N.A.1, Moskalev A.A.1
-
Affiliations:
- Mendeleev All-Russia Research Institute of Metrology (VNIIM)
- Issue: Vol 59, No 2 (2016)
- Pages: 137-141
- Section: Article
- URL: https://bakhtiniada.ru/0543-1972/article/view/245742
- DOI: https://doi.org/10.1007/s11018-016-0931-3
- ID: 245742
Cite item
Open Access
Access granted
Subscription Access
Abstract
The characteristics of the first-echelon State Standard of the unit of length, the meter in the range from 10–6 to 1100 mm, which has been placed in service at the Mendeleev All-Russia Scientific Research Institute of Metrology are presented. Results of studies of the standard in the field of metrological assurance of thread gauges are given.
Keywords
About the authors
Yu. G. Zakharenko
Mendeleev All-Russia Research Institute of Metrology (VNIIM)
Author for correspondence.
Email: Y.G.Zackharenko@vniim.ru
Russian Federation, St. Petersburg
N. A. Kononova
Mendeleev All-Russia Research Institute of Metrology (VNIIM)
Email: Y.G.Zackharenko@vniim.ru
Russian Federation, St. Petersburg
A. A. Moskalev
Mendeleev All-Russia Research Institute of Metrology (VNIIM)
Email: Y.G.Zackharenko@vniim.ru
Russian Federation, St. Petersburg
Supplementary files
