电邮这篇文章 Study of water heating efficiency in cavitation mode at the initial stage of grain molasses preparation
- 作者: Nechaev V.N.1, Aleshkin A.V.2, Savinykh P.A.3
-
隶属关系:
- Nizhny Novgorod State University of Engineering and Economics
- Vyatka State University
- Federal Agrarian Scientific Center of the North-East named after N.V. Rudnitsky
- 期: 卷 90, 编号 6 (2023)
- 页面: 575-583
- 栏目: Economics, organization and technology of production
- URL: https://bakhtiniada.ru/0321-4443/article/view/253591
- DOI: https://doi.org/10.17816/0321-4443-569016
- ID: 253591
如何引用文章
全文:
详细
BACKGROUND: Grain molasses is a valuable source of digestible protein and feed sugar for farm animals. At the initial stage of production of this feed mixture, the existing devices and water heating schemes are not effective enough. Therefore, a new passive-type device for accelerated heating of water has been developed.
AIM: Evaluation of efficiency of a cavitator for heating water at the grain molasses production plant.
METHODS: In order to conduct studies, a cavitator made in the form of a cone with vanes, the apex angle of which is 16°8ʹ, is installed in a glass pipe of the injection branch of the water circuit of the plant for the preparation of grain molasses. During the experiments, the vanes were installed in the pipe straight or bent by 15°. In laboratory conditions, a comparative experiment was carried out to heat water with a volume of 50 liters, starting from its temperature of 20°C and through each degree to 30°C, both with and without the cavitator. The process efficiency criteria were: time and specific energy consumption of water heating.
RESULTS: As a result of the conducted studies, the values of the efficiency criteria for the water heating process with and without the cavitator are found. Linear dependence of water temperature on heating time is obtained. It has been shown that the created cavitation effect behind the base of the cone is not stable, but still more intense behind the cone with straight petals. It is noted that the coefficient of hydraulic resistance for the cavitator with vanes bent by 15 ° is 10% greater than with straight ones.
CONCLUSIONS: Use of a cavitator when heating water at the initial stage of preparing grain molasses increases efficiency of the process by 20%.
作者简介
Vladimir Nechaev
Nizhny Novgorod State University of Engineering and Economics
编辑信件的主要联系方式.
Email: nechaev-v@list.ru
ORCID iD: 0000-0002-7566-6013
SPIN 代码: 9562-7900
Associate Professor, Cand. Sci. (Engineering), Associate Professor of the Technical and Biological Systems Department
俄罗斯联邦, KnyagininoAlexey Aleshkin
Vyatka State University
Email: usr00008@vyatsu.ru
ORCID iD: 0000-0002-6949-1480
SPIN 代码: 5084-5478
Professor, Dr. Sci. (Engineering), Professor Professor of the Mechanics and Engineering Graphics Department
俄罗斯联邦, KirovPeter Savinykh
Federal Agrarian Scientific Center of the North-East named after N.V. Rudnitsky
Email: peter.savinyh@mail.ru
ORCID iD: 0000-0002-5668-8479
SPIN 代码: 5868-9317
Professor, Dr. Sci. (Engineering), Head of the Mechanization of Animal Husbandry Laboratory
俄罗斯联邦, Kirov参考
- Sysuev VA, Aleshkin AV, Savinyh PA. Feed preparation machines (theory, idea, experiment): [2 Vols.]. Kirov: NIISKH Severo-Vostoka; 2008. T. 1. (In Russ).
- Morozov NM, Rasskazov AN. Competitiveness of livestock products – state and directions of increase. Nikonovskie chteniya. 2017;22:59–65. (In Russ).
- Morozov NM. Development of computer technologies and technical means for mechanization and automation of processes in animal breeding. Tekhnika i oborudovanie dlya sela. 2013;8:2–7. (In Russ).
- Perevozchikov AV, Vorob’eva SL, Berezkina GYu. Influence of grains in cows rings on qualitative characteristics of raw milk and products of its treatment. Agrar. vestn. Urala. 2019;186(2):51–58. (In Russ). doi: 10.26897/2687-1149-2023-3-41-48
- Nechaev VN. Optimising the setting parameters of a passive grinder used for rye molasses preparation. Agroinzheneriya. 2023;25(3):41–48. (In Russ). doi.org/10.26897/2687-1149-2023-3-41-48
- Basymbekova A, Kabylbekova BN, Amanbaeva KB. Water rigidity and its influence on the formation of scale deposits in the pipelines of heat supply systems. Nauchnye trudy YUKGU im M Auezova. 2016;3(38):6–8. (In Russ).
- Alekseev V, Arkhipov A, Piskunov D, et al. Water treatment of process systems of steam and hot water boilers: water rigidity and measurement method. TekhNadzor. 2016;1(110):224–225. (In Russ).
- Aganin AA, Il’gamov MA, Kosolapova LA, et al. Collapse of a cavitation bubble in fluid near rigid wall. Vestnik Bashkirskogo universiteta. 2013;18(1):15–21. (In Russ).
- Isakov AYa, Ryabtsev KA. Vortex cavitation in technological devices. Vestnik KamchatGTU. 2003;2:207–214. (In Russ).
- Idel’chik IE. Spravochnik po gidravlicheskim soprotivleniyam. Moscow: Mashinostroenie; 1992. (In Russ).
补充文件
