Experience in the Design and Reliable Operation of Ore-Pulp Precessional Mixers for Large-Volume Process Tanks
- 作者: Domanskii I.V.1, Mil’chenko A.I.2, Sargaeva Y.V.2, Kubyshkin S.A.2, Vorob’ev-Desyatovskii N.V.2
-
隶属关系:
- St. Petersburg State Technological Institute (Technical University)
- JSC Polymetal Engineering
- 期: 卷 51, 编号 6 (2017)
- 页面: 1030-1042
- 栏目: Article
- URL: https://bakhtiniada.ru/0040-5795/article/view/171846
- DOI: https://doi.org/10.1134/S0040579517060021
- ID: 171846
如何引用文章
详细
The advantages of special smooth-wall apparatuses equipped with precession stirrers compared to typical process tanks equipped with the stiff shafts of stirrers have been shown. A one-dimensional mathematical model has been considered for describing the rotary velocity field and calculating the hydrodynamic loads used during the design of large-volume precession apparatuses for mixing ore pulps. The validity of the model has been confirmed experimentally using the literature data and a positive experience in the long-term operation of process tanks that are 50–1250 m3 in volume, which are designed for the dealkalization of high concentrations of ore suspensions of noble metals.
作者简介
I. Domanskii
St. Petersburg State Technological Institute (Technical University)
Email: Vdesjatovsky@polymetal.spb.ru
俄罗斯联邦, St. Petersburg, 190013
A. Mil’chenko
JSC Polymetal Engineering
Email: Vdesjatovsky@polymetal.spb.ru
俄罗斯联邦, St. Petersburg, 198216
Yu. Sargaeva
JSC Polymetal Engineering
Email: Vdesjatovsky@polymetal.spb.ru
俄罗斯联邦, St. Petersburg, 198216
S. Kubyshkin
JSC Polymetal Engineering
Email: Vdesjatovsky@polymetal.spb.ru
俄罗斯联邦, St. Petersburg, 198216
N. Vorob’ev-Desyatovskii
JSC Polymetal Engineering
编辑信件的主要联系方式.
Email: Vdesjatovsky@polymetal.spb.ru
俄罗斯联邦, St. Petersburg, 198216
补充文件
