Selecting the preferred pressure unit
- 作者: Bondarev V.N.1, Onuchin M.F.2
-
隶属关系:
- Scientific-Industrial Association of Refrigeration Equipment Manufacturers "Kholodprom"
- ZAO V.B. Shnepp Research Institute of Turbocompressor
- 期: 卷 91, 编号 10 (2002)
- 页面: 26-28
- 栏目: Articles
- URL: https://bakhtiniada.ru/0023-124X/article/view/105845
- DOI: https://doi.org/10.17816/RF105845
- ID: 105845
如何引用文章
全文:
详细
The long-term practice of using the International System of Units (SI) according to GOST 8.417-81 "Units of physical quantities" has shown that the application of the pressure units offered in it leads to arbitrary and unintentional errors in calculations. Let's consider the causes of the resulting misunderstandings and the possibility to avoid them.
作者简介
V. Bondarev
Scientific-Industrial Association of Refrigeration Equipment Manufacturers "Kholodprom"
编辑信件的主要联系方式.
Email: info@eco-vector.com
PhD in Engineering
俄罗斯联邦M. Onuchin
ZAO V.B. Shnepp Research Institute of Turbocompressor
Email: info@eco-vector.com
俄罗斯联邦
参考
补充文件
附件文件
动作
1.
JATS XML
2.
Numerical example of the effect of the selected value of barometric pressure on the value of overpressure at a given absolute pressure value for the calculation of the equipment: A - the choice of barometric pressure 1 atm = 760 mm Hg at a given absolute pressure of 2 ata. B - selection of barometric pressure 1 atm = 735.561mmHg at a given absolute pressure of 2 ata. C - selection of barometric pressure 1 bar = 750.064mmHg at a given abs. pressure of 2 bar abs. Note. The annual average barometric pressure in Moscow is 750mmHg.
下载 (1MB)
