Development and research of a heat exchanger using porous materials
- Authors: Kireev V.V.1
-
Affiliations:
- LLC "Industrial and processing complex"
- Issue: Vol 93, No 2 (2004)
- Pages: 14-17
- Section: Articles
- URL: https://bakhtiniada.ru/0023-124X/article/view/101055
- DOI: https://doi.org/10.17816/RF101055
- ID: 101055
Cite item
Full Text
Abstract
A new heat exchanger «liquid-air» is offered where the process of heat exchange is intensified through the use of the tubes of a drop like section (instead of round tubes), and the surface of heat exchange is significantly increased owing to the use of net plates. The increase in heat exchanger efficiency is also achieved during evaporation on heat exchanger surface of the water injected into the flow of the cooling air.
Full Text
##article.viewOnOriginalSite##About the authors
V. V. Kireev
LLC "Industrial and processing complex"
Author for correspondence.
Email: info@eco-vector.com
Канд. техн, наук
Russian Federation, TulunReferences
Supplementary files
Supplementary Files
Action
1.
JATS XML
2.
Rice. Fig. 1. Scheme of air flow around heat exchange elements: a — drop-shaped tube; b - round pipe
Download (779KB)
3.
Rice. 2. Scheme of the study of the heat exchange element: I - heat exchange element; 2 - nozzle; 3 - valve; 4 - water tank: 5 - water circuit; 6 - expander; 7 - control valve; 8 - heater
Download (779KB)
4.
Rice. Fig. 3. Dependence of the true heat transfer coefficient from the fuel cell surface to the cooling medium on the air speed: 1 - cylindrical pipe; 2 - drop-shaped pipe; 3 - drop-shaped pipe with water irrigation
Download (712KB)
5.
Rice. 4. Heat exchanger: 1 - body; 2 - intake manifold; 3 - exhaust manifold; 4 - pipes; 5 - mesh plates; 6 - annular space
Download (1MB)
6.
Rice. 5. Scheme of movement of the cooling medium: 5 - mesh plates; 7 - manifold baffles; 8 - nozzle
Download (773KB)
7.
Rice. Fig. 6. Dependence of the change in the heat transfer coefficient of the heat exchanger on the speed of the cooling medium (T air = 278 K) at a speed of water movement through the pipes of 0.1 m/s: 1 - without mesh plates; 2 - with mesh plates; 3 - with mesh plates and water injection
Download (678KB)
