Kazakhstan journal for oil & gas industry
ISSN (print): 2707-4226, ISSN (online): 2957-806X Founder: KMG Engineering, Republic of Kazakhstan Editor-in-Chief: Bakhytzhan K. Khasanov Frequency / Access: 4 issues per year / Open Included in: Ulrich's Periodicals Directory, WorldCat
Authors who publish with this journal agree to the following terms: Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International Licensee (CC BY-NC-ND 4.0) that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access). All the Copyright statements for authors are present in the standart Publishing Agreement (Public Offer) to Publish an Article in an Peer-review science journal 'Kazakhstan journal for oil & gas industry'. READ the details online (tap to see in details) Publishing Agreement (Public Offer) to Publish an Article in an Academic Periodical 'Kazakhstan journal for oil & gas industry' KMG ENGINEERING LLP, represented by Zhanibek K. Nugmanov (hereinafter referred to as the Publisher), on the one hand, offers an indefinite circle of persons (hereinafter referred to as the Author), and on the other hand, hereinafter jointly referred to as the parties, to execute this agreement (hereinafter referred to as the Agreement) on the publication of scientific materials (hereinafter referred to as the Article) in a scientific journal “Kazakhstan journal for oil & gas industry” (further-the Journal) in accordance with the conditions stated below. 1. General Provisions This Agreement is a public offer (hereinafter referred to as the Offer) requiring full and unconditional acceptance (Acceptance), which means the sending by the Author of his/her materials by way of uploading the same to the online electronic system designed to accept manuscripts for consideration, and subsequently posted in the corresponding section of the Journal’s website on the Internet information and telecommunications network (hereinafter referred to as the Internet). Regarding the observance of copyright on electronic information resources, all materials found in the website, including submitted electronic journals, may not be reproduced in whole or in part in any form (electronic or printed) without the prior written consent of the Publisher. Prior consent can be given by publishing an article in the open access and expressing the appropriate permission, which is in the form of an open Creative Commons license in the designated section of the journal’s website (where the published materials are placed) on the Internet. The journal requires license users to reference the original source, i.e., the publication, if the Author permits use of the public materials in the context of other documents. 2. Terms used in the Agreement “Author” refers to an individual (or individuals) whose creative work has led to the creation of the manuscript of a scientific article. “Manuscript” of the article in the journal is the result of conducting fundamental and applied scientific research in the form of scientific material, review of a scientific material, a scientific report, a bibliographic review on certain topics of scientific research, and a historical reference devoted to figures of science, which is then submitted by the author for publication in the journal. “Offer” is the document (an offer to the author) for the publication of an article by posting it on the journal’s website on the Internet. “Publication” is the placement of an article in the journal. “Article” is the manuscript of the article that has passed the reviewing, editorial and publishing process. “Acceptance of the offer” refers to the full and unconditional acceptance of the offer on the terms specified in paragraph 3 of this agreement (the author accepts offer by sending a Submission to the publisher, uploading the manuscript of the article, along with accompanying materials, to the online electronic system designed to accept articles for consideration, which is then posted in the corresponding section of the journal’s website on the Internet). “Journal” is a scientific peer-reviewed journal registered as a mass media entity. “Submission” is an electronic appeal of the author to the publisher for the publication of an article in the journal by uploading the manuscript and accompanying materials to the online electronic system designated for accepting articles for consideration, and subsequently posting them in the corresponding section of the journal’s website on the Internet). “Publisher” refers to KMG ENGINEERING LLP, which is the founder and publisher of the journal. Article metadata includes the materials in Russian and English that are intended for inclusion in International Scientific Databases (ISD), namely the following: title of the article; information about each of the authors (surname and first name; patronymic; place of work with the postal address indicated, contact information (e-mail, address, phone); abstract; keywords; thematic rubricator: UDC (Universal Decimal Classification) or other library and bibliographic classification and subject indexes; bibliographic list (list of references). “Editorial board” is the creative team that prepares the journal for publicationl; “Editorial Council” is an advisory body under the editorial board of the journal; “Parties” refers to the author and the publisher; “Author Guidelines” are the requirements for materials published in the journal, posted in the authors section of the journal’s website on the Internet. 3. Subject of the Agreement (Offer) Under this agreement, the Author grants the Publisher free of charge for the entire period of validity a non-exclusive license to use the Article created by the former for publication in the Journal, as well as the rights to use the article in the following ways: Reproduction of the Article or its sections or parts, as well as the metadata of the Article in Russian, English or other languages, in any material form, including on paper and electronic media, as a separate work in journals and/or databases (local or in the Internet) of the Publisher and/or other persons, at the discretion of the Publisher; Distribution of the Article or its sections or parts, as well as the metadata of the Article in Russian, English or other languages, on any medium. as part of the Journal and/or databases of the Publisher or other persons, at the discretion of the Publisher, or as an independent work around the world whether on Open-Access terms or for a fee without remuneration to the Author; Making the Article or any of its sections or parts, as well as the Article’s metadata in Russian, English or other languages, publicly available in such a way that any person can access the Article from any place, including via the Internet, and at any time of their own choosing; Granting permission/s for the use of the Article or its individual parts, as well as its metadata in Russian, English or other languages, to third parties with notice to the Author made by posting relevant information on the Journal’s website, without paying remuneration to the Author; Processing the Article, including by translating it to other languages, and by using the revised (translated) articles in the aforementioned ways. Other rights not directly transferred to the Publisher under this Agreement, including patent rights to any process, method etc., described by the Author in the Article, as well as trademark rights, are reserved for the Author. The territory where the rights to the Article are allowed to be used is the whole world. The validity of this Agreement commences from the moment the Author sends a Submission to the Journal by uploading the manuscript of an Article and supplementary materials to the online electronic system designed to accept articles for consideration, and subsequently posted in the corresponding section of the Journal’s website on the Internet. The rights are granted by the Author to the Publisher free of charge; the publication of the Article in the Journal does not entail any financial deductions to the Author. If the Publisher decides to reject the Submission or refuse to publish the Article in the Journal, this Agreement becomes invalid. The decision to refuse publication will be sent to the Author at the e-mail address specified in the Submission. The Publisher undertakes to provide the Author with the necessary services related to the publication of the Article on the Journal’s website during the term of the agreement. 4. General Provisions of Rendering the Services The Publisher will provide services to the Author only if the following conditions are met: The parties have concluded a corresponding service agreement. The Author has uploaded to the site all the materials necessary to enable the provision of services. The Author has paid for the services in full. Services are provided to the Author on a paid basis after executing the appropriate contracts (for Fast-track editorial evaluation of a manuscript and prior-to-schedule publication in case of its acceptance, for publication of the article in open access, etc.). If the materials are provided by the Author in violation of the guidelines and requirements of this offer, the Publisher reserves the right to reject the Submission and refuse to provide services if it has been found that the provided materials violate any of the guidelines and requirements of this offer. The Publisher will not be held responsible for the unauthorized use by third parties of the data provided by the Author during the term of the agreement. 5. Rights and Duties of the Parties The Author guarantees that: S/he holds the copyright the exclusive rights to the materials transferred as part of the manuscript of the Article. The rights granted to the Publisher under this agreement have not been previously transferred and will not be transferred to third parties in the future during the duration of the Agreement. The manuscript contains all references to the cited authors and/or publications (materials) provided for under the current copyright legislation. The Author has obtained all the necessary permissions for all information and other materials s/he holds no copyright to and that are used in the manuscript of the Article. The Article manuscript contains only materials permitted to be published in the open press and its publication and distribution will not lead to the disclosure of secret (confidential) information (including state secrets). The Author has informed co-authors about the terms of this Agreement and has received their consent to execute this Agreement under the terms provided for in the Agreement. The Author carries certain obligations under the terms of the Agreement. S/he should submit the manuscript of the Article in accordance with the Author Guidelines listed on the Journal’s website; The author should not use an electronic copy of the Article for commercial purposes and in other journal publications without the consent of the Publisher; In the process of preparing a manuscript for publication, the Author is obligated to undertake the following: Make corrections to the text of the manuscript that have been marked by the reviewers and accepted by the editorial board, and/or as necessary, upon the request of the Publisher and the editorial board, finalize the manuscript of the Article; Review and accept of reject the proofreading of the manuscript of the article under the terms stipulated by the publication schedule of the Journal; Make only the minimum of corrections to the proofreading of manuscript, which usually entails correcting and/or making factual and conjecture changes. The Author has the following rights and duties: Use preprint or prior-to publication versions of an unpublished article in the form and content accepted by the Publisher for publication in the Journal. Such prior-to-publish versions can be placed as electronic files on the personal websites of the Author (co-authors) or on the protected external websites of the employers of the Author; however, the Author cannot use the unpublished version(s) for commercial sale or for systematic external distribution by a third party (i.e. post on social media). The author or co-authors must, in turn, carry out certain duties, namely: Include the following warning in the prior-to-publish version: “This is prior-to-publish version of the article accepted for publication in (Journal’s name), ©, copyright (year), copyright owner specified in the Journal)”; Provide the corresponding electronic link to the Publisher’s website at https://vestnik-ngo.kz/ and/or via the DOI. Copy or transfer a copy of the published article in whole or in part to colleagues free of charge for their personal or professional use, for the promotion of academic or scientific research, or for informational purposes of the Author’s employer. Use materials from a published article in a book written by one of the co-authors. Use individual figures, tables and text excerpts from the Article for his or her (or co-authors’ own training purposes or to include them in other published works in printed or electronic format) by a third party, or to submit them in electronic format on an internal computer network or on the public website of the Author (co-authors) or his/her employer. Include the Article in educational collections for use in the classroom, either for free distribution to the Author’s (co-authors’) students or in electronic format on a local server for access by students as part of the training course, as well as for internal training programs at the institution of the Author’s employer. The Publisher, for its part, is obliged to: Publish the Author’s article in the Journal in printed and electronic form in accordance with the terms of this Agreement; If necessary as so decided by the Journal’s editorial board, provide the Author with the proofreading of the manuscript and make a reasonable edit of the Author’s work; Provide the Author with an electronic copy of the published Article to the Author’s e-mail address within 15 working days from the date of publication of the relevant Journal issue; Comply with the Author’s rights as provided for by the current legislation, as well as protect them and take all necessary measures to prevent copyright infringement by third parties. The Publisher has a right to: Carry out technical and literary editing of the Article manuscript without altering the main content; Conduct an expert evaluation of the manuscript and invite the Author to make the necessary changes, if any, of which until such time the article will not yet be published in the Journal; In any subsequent authorized use by the Author (and/or other persons) of the Journal and/or Article (including any separate part or fragment thereof), require that a link to the Journal, Publisher, Author or other copyright holders, the title of the Article, the Journal number, and the year of publication be specified in the Journal; Post preliminary and/or advertising information about the upcoming publication of the Article in the media and other information sources; Establish the guidelines for accepting and publishing materials in the Journal; Temporarily suspend the provision of services to the Author when technical, technological or other issues that prevent the smooth provision of such services are encountered, until such that the issues are eliminated; Make changes to the offer in accordance with the procedure established by the offer. The editorial board of the Journal, headed by the editor-in-chief, has the exclusive rights to select and/or reject materials sent to the Journal editorial office for publications purposes. The manuscript sent by the Author to the Journal editorial office is not subject to return. The editorial board of the Journal does not enter into correspondence about rejection of submissions. In all cases not stipulated and not provided for in this agreement, the parties are obliged to be guided by the relevant current laws of the Kazakh Respubic. 6. Acceptance of the Offer and Execution of the Agreement. Terms of the Agreement This Agreement comes into force from the moment of its execution, when the Author accepts the offer by submitting the manuscript to the Publisher, and is valid for the duration of the exclusive rights to the Article. Acceptance of the offer by the author creates an Agreement in writing on the terms of the offer. Transfer of the exclusive right to an Article (alienated) by the Author to a third party, does not terminate this agreement. 7. Procedure for changing and terminating the Agreement The Publisher has the right to unilaterally change the terms of this Agreement, in advance, at least 10 (ten) calendar days before the entry into force of the intended relevant changes, but with notice to the Author through the Journal’s website or by e-mail to the Author’s e-mail address specified in the Author’s Submission. The changes will take effect from the date specified in the relevant notification. If the Author rejects the changes to the terms of this Agreement, s/he has the right to notify the Publisher by sending a written notification through the online electronic system designed for accepting articles for consideration, making sure that the same is posted in the corresponding section of the Journal’s website on the Internet, or to the official e-mail address of the editorial office on the Internet. This Agreement may be terminated prematurely, either by agreement of the parties at any time, or on other grounds provided for in this Agreement. The Author has the right to unilaterally withdraw from the execution of this Agreement by sending the Publisher a corresponding notification in writing at least 60 (sixty) calendar days in advance before the expected date of publication of the Article in the Journal. Termination of the Agreement for any reason does not release the parties from liability for any violation of the terms of the Agreement that occurred during the validity period. 8. Responsibility The parties are responsible for non-fulfillment or improper fulfillment of their obligations under the Agreement. All information provided by the Author must be reliable. The Author is expected to provide accurate and complete the information to the Publisher. When using false information received from the Author, the Publisher is not responsible for the negative consequences caused by his actions on the basis of the false information provided. With regard to the content of the Article, the Author is solely responsible for compliance with the requirements of the laws of the Kazakh Respubic pertaining to advertising, copyright and related rights’ protection, protection of trademarks and service marks, and the protection of consumer rights. The Publisher does not bear any responsibility under the agreement: for any actions that are a direct or indirect result of Author’s illegal actions for any loss incurred by the Author, regardless of whether the Publisher could have foreseen the possibility of such losses or not. The Publisher is released from liability for violation of the terms of the Agreement if such violation is caused by force majeure, including actions of state authorities (including the adoption of legal acts), fire, flood, earthquake, other natural disasters, lack of electricity and/or computer network failures, strikes, civil unrest, riots, etc. 9. Dispute resolution Disputes and disagreements will be resolved by the parties through negotiations, and in case of failure to reach an Agreement they will strive to seek resolution in accordance with the current legislation of the Kazakh Respubic. If there are unresolved disagreements, the parties agree to resolve the disputes in court at the jurisdiction covered by the Publisher’s location in accordance with the current legislation of the Kazakh Respubic. 10. Miscellaneous All notifications, messages, requests, etc. (with the exception of documents that must be sent as originals in accordance with the laws of the Kazakh Respubic) are considered received by the Author if they were transmitted (sent) by the Publisher through the Journal’s website (including by publication), fax, e-mail based on the address specified in the Submission, and other communication channels. The parties recognize the legal force of notifications, messages, requests, etc., transmitted (sent) by the above methods. In the event of claims against the Publisher related to the violation of the exclusive copyright and other intellectual property rights of third parties when creating an article or in connection with the execution of this Agreement by the Author, as well as in connection with the use of the Article by the Publisher in accordance with the Agreement, the author undertakes: To immediately take measures to resolve disputes with third parties soon after receiving Publisher’s notification, and if necessary, enter into legal proceedings on the Publisher’s side and take all appropriate actions needed to exclude the Publisher from the list of defendants; To reimburse the publisher for the legal costs incurred and expenses and losses caused by the application of measures to secure the claim and execute a court decision, and the money paid to a third party for the violation of exclusive copyright and other intellectual property rights, as well as other losses incurred by the Publisher in connection with the Author’s non-compliance with the guarantees provided by them under this Agreement. 11. Legal address and details of the Publisher LLP «KMG Engineering» Address: Republic of Kazakhstan Z05H0B8, Nur-Sultan city, Esyl district, Kabanbay-batyr ave. 17 Contact (for office): +7 (7172) 559-782 Email: info@niikmg.kz WEB: https://kmgen.kz/en/company/contacts/
Lithological and stratigraphic correlation of Mesozoic and Cenozoic deposits of the Balkhash sedimentary basin for appraisal of hydrocarbon resources
Background: Development of a geological framework to substantiate and quantitatively evaluate the hydrocarbon potential of the Balkhash sedimentary basin cover. Aim: Identification of the key estimation parameters for potentially promising hydrocarbon plays (area, thickness, lithological composition) on a qualitatively new geological lithological and stratigraphic base for determining the hydrocarbon potential of the Balkhash sedimentary basin. Materials and methods: Correlation of lithological and stratigraphic sequences of Mesozoic (Triassic-Cretaceous) and Cenozoic (Paleogene-Neogene) deposits in accordance with the stratigraphic charts of the Phanerozoic of Kazakhstan based on the International Chronostratigraphic Scale from 2016 to 2021. Results: The paper investigates the geological structure, zoning, and platform cover of the Balkhash sedimentary basin (BB). During the study, two tectonic units were identified within the BB structure: the West Balkhash and East Balkhash (Lepsin) depressions. Lithological and stratigraphic charts of the Balkhash sedimentary basin have been created and refined to serve as a basis for appraising its hydrocarbon resources. Additionally, prospective hydrocarbon plays have been identified, and their thicknesses have been measured. Furthermore, the analysis of lithological and stratigraphic data has allowed for the determination of the thicknesses, distribution areas of these discoveries, and the organic carbon content within them. These parameters are critical for calculating predicted hydrocarbon resources. Data regarding the development areas of promising BB hydrocarbon plays were obtained from the results of constructing lithological and paleogeographic maps and sections. Conclusion: Based on the developed lithological and stratigraphic model, charts of the Balkhash basin have been drawn up allowing for appraisal of the hydrocarbon potential. The oil and gas potential of the region is estimated to be very low due to the characteristics of the sedimentary cover structure, tectonic activity, and types of possible traps. However, we have identified prospective gas plays that exhibit certain capacities, areas, and organic matter content.
版权所有 © Korobkin V., Chaklikov A., Tulemissova Z., 2025 https://creativecommons.org/licenses/by-nc-nd/4.0
Optimizing gas injection in high-pressure carbonate reservoirs: controlling bottomhole and tubing head pressures to avoid formation fracturing
Background: In high-pressure carbonate reservoirs, miscible gas injection is a key method for enhancing oil recovery and maintaining reservoir pressure. The main challenge lies in controlling bottomhole pressure (BHP) and tubing head pressure (THP) while maximizing injection volumes and preventing formation fracturing. Current strategies typically rely on THP regulation and injection rates as the primary means of well control. Aim: This study aims to analyze an optimized gas injection strategy based on precise well control to prevent formation fracturing and improve injection efficiency. Materials and methods: The study uses production and geological data analysis, empirical forecasting models, and statistical techniques to enhance the accuracy and reliability of predictions. Modern algorithms and data-processing technologies are applied to handle large datasets, allowing for more accurate and consistent forecasts of key field development indicators. Results: The results indicate that gas injection can be optimized by lowering reservoir pressure and increasing tubing head pressure (THP). This stabilizes bottomhole pressure (BHP) because of increased frictional losses in the tubing string. Controlling THP and gas rates allows stable BHP operation. Currently, maximum BHP limits have been established for the wells, while allowable THP is restricted but can be increased based on previous test results. An increase in THP would enable higher gas injection volumes, leading to improved oil recovery. BHP remained within safe limits and was monitored directly with downhole pressure gauges. Conclusion: This study presents an optimized approach to gas injection management, based on real-time pressure monitoring, well–reservoir nodal analysis, dynamic control of tubing head pressure (THP), and regulation of gas flow rates. The results emphasize the need to consider nonlinear pressure losses when designing safe and efficient injection strategies. Considering these effects helps prevent formation fracturing and ensures long-term reservoir integrity.
版权所有 © Khassanov B., Stepanchuk A., Zholdybayeva A., 2025 https://creativecommons.org/licenses/by-nc-nd/4.0
A review on the production natural gas using energy-efficient and environmentally safe and sound technologies
With the rapid development of green energy and its transition to renewable sources, countries and multinational oil and gas companies are increasingly focusing on forecasting global scenarios of the world economy’s demand for hydrocarbon resources. These predictions serve as a key reference point for determining future development strategies. Gas produced from natural sources plays a key role in the global energy industry and in the international balance of fuels. The main objective of the Gas Processing Plants construction is to provide Kazakhstan consumers with high-quality sales gas and increase the stability of gas delivery at the expense of the country’s own resources. In order to meet the technical requirements for finished products, the processing trains of the plant should be equipped with inlet separators, gas dehydration units, gas sweetening unit and sour (raw) gas injection system. This article presents an overview of new gas treatment technologies used in the processes of sales gas production. The classification and brief characteristics of gas sweetening systems, including absorption, adsorption and membrane methods, are described. The different types of zeolites used in dehydration systems are also presented. Special attention is given to gas injection processes.
版权所有 © Satenov K., Suleimen Y., Tashenov Z., 2025 https://creativecommons.org/licenses/by-nc-nd/4.0
Oil and Algorithms: How Artificial Intelligence turns Data into Energy
The article explores the application of Artificial intelligence in the oil industry, focusing on the transformation of data into new energy sources. Artificial intelligence is used to optimize oil extraction and refining processes, contributing to increased productivity, reduced costs, and enhanced safety. The implementation of innovative algorithms, such as machine learning and the Internet of Things, significantly improves forecasting accuracy, the identification of hidden patterns, and process automation. These technologies help effectively manage risks, minimize costs, and accelerate operations, while also enhancing environmental sustainability. Artificial intelligence promotes the rational use of natural resources and reduces environmental impact, improving both economic and environmental performance of oil companies. Overall, the use of Artificial intelligence in the oil industry opens up new opportunities for more efficient and environmentally friendly production, making processes more sustainable in the long term.
版权所有 © Seitimbetova A., Shulgina-Tarachshuk A., Smailova A., 2025 https://creativecommons.org/licenses/by-nc-nd/4.0
Analysis of the structure of bitumen-polymer composites based on IR spectroscopy data
Background: The use of bitumen-polymer composites is a relevant and promising approach to improving the performance characteristics of bituminous materials in road construction. Studying the structure and interaction mechanisms of components in such composites enables the optimization of formulations and enhancement of the final product’s quality. Aim: The aim of this research is to investigate the structure and the nature of interactions between the components of bitumen-polymer composites based on bitumen, polypropylene, and heavy petroleum residues using infrared (IR) spectroscopy. Materials and methods: The IR spectroscopy method was used to analyze structural changes in the composites. The spectra of the initial components (bitumen, polypropylene, heavy petroleum residues) and the modified bitumen were studied. A comparative analysis of the position and intensity of characteristic absorption bands corresponding to the main functional groups was carried out. Results: It was found that the introduction of polypropylene causes changes in the bitumen absorption spectra, particularly in the region of the stretching vibrations of carbon-hydrogen and carbon-oxygen bonds. This indicates structural transformations and redistribution of molecular interactions within the system. The additional incorporation of heavy petroleum residues amplifies these effects, resulting in changes in the physical properties of the composite, – notably, increasing the softening temperature and decreasing penetration. It was shown that the degree of interaction between components depends on polymer concentration and modification conditions. Conclusion: The obtained results reveal the mechanisms of structure formation and component interaction in bitumen-polymer composites, providing a scientific foundation for optimizing modified bitumen formulations. The work contributes to the development of research methodologies and expands the application of bituminous materials in construction and road industries.
版权所有 © Seitenova G., Syzdyk A., Jexembayeva A., Dyussova R., 2025 https://creativecommons.org/licenses/by-nc-nd/4.0
Investigation of the crosslinking process of polymer materials to enchance the efficiency of waterproofing compounds
Background: Currently, a significant portion of the oil fields in Kazakhstan are at the final stages of development, characterised by a steady decline in oil production and a progressive increase in water cut. These processes greatly diminish the efficiency of reservoir operation and make managing hydrocarbon displacement systems more complex. Under current conditions, technologies aimed at limiting and isolating water inflows are becoming increasingly relevant as a key element in enhancing the efficiency of field development. One promising approach in this area is the use of gel-polymer systems capable of selectively blocking highly permeable, water-saturated zones and redirecting filtration flows toward oil-saturated intervals. This allows for a significant increase in oil recovery and improves the technical and economic performance of reservoir development. Aim: The study aims to investigate the cross-linking process of polymer gels and to evaluate the key parameters of this process using various methods. Materials and methods: Special attention has been paid to the development and implementation of a rheological method for accurate quantitative determination of gel cross-linking time, which significantly enhances the objectivity and reproducibility of results compared to traditional visual assessment, which is currently the only generally accepted method. Results: It has been established that visually complete crosslinking occurs in 1.5–2 hours after the preparation of solutions. At the same time, rheometric measurements showed that crosslinking occurred significantly earlier. This confirms the higher accuracy and sensitivity of the instrumental method. Conclusion: The studies confirmed that rheometric methods allow high-precision determination of the time and degree of polymer crosslinking, which is impossible with visual assessment. This provides operators with more reliable information about the gel structure formation process and allows them to control the key parameters of gel formation at early stages. The data obtained emphasise the importance of rheometry as a reliable tool for objective evaluation of polymer crosslinking. Such evaluation plays a crucial role in the design and implementation of gel-polymer systems in oil recovery enhancement technology, especially in conditions of complicated geology and high water cut.
版权所有 © Abdykalykov S., Sabaldash V., 2025 https://creativecommons.org/licenses/by-nc-nd/4.0
Methods for lost circulation control and water shutoff in oil and gas wells
Background: Improving technologies for lost circulation control and water shutoff remains a key priority in drilling oil and gas wells. In West Kazakhstan, which holds significant hydrocarbon reserves, various methods are applied, including cement slurries, lost circulation materials (LCM) of different particle sizes, and high-viscosity or polymer systems. Despite notable progress in cementing technologies, universal solutions that combine lost circulation control with water shutoff are still scarce. Their effectiveness is highly dependent on the geological and technical conditions of each field. Current research focuses on selective materials that adapt to reservoir heterogeneity and deliver reliable sealing. Aim: This study summarizes field experience with lost circulation and water shutoff technologies in wells drilled in West Kazakhstan. It also analyzes existing isolation materials and systems in terms of their effectiveness, limitations, and future potential. Materials and methods: The study used data from wells drilled in West Kazakhstan, results of field tests, and patent and technical literature on modern cementing and isolation materials. Results: This study reviews existing isolation systems, their mechanisms, and limitations, supported by field examples and patented technologies. A key focus is the concept of a universal sealing material able to address both lost circulation and water shutoff. This approach could enhance the efficiency of isolation treatments, lower operating costs, and reduce environmental risks. Conclusion: The effectiveness of isolation treatments depends on both the proper selection of materials and the technology of their application. The analysis of existing solutions indicates that, despite a variety of options, consistent performance is not always achieved under complex geological conditions. Therefore, further research is required to optimize formulations and adapt technologies to the specific characteristics of regional fields.
版权所有 © Raikulov S., Maryan S., Yamagulov T., 2025 https://creativecommons.org/licenses/by-nc-nd/4.0
Prospects for obtaining base oils from bitumen-bearing rocks of the Karasyaz-Taspas deposit
Background: With light oil reserves depleting and the demand for lubricants steadily increasing, the development of alternative sources of hydrocarbon feedstock has become a pressing issue. Despite the technological complexity of processing, natural bitumens represent a promising raw material for the production of base oils, particularly in the Republic of Kazakhstan, where domestic industrial lubricant production is currently absent. Aim: To assess the possibility of obtaining base industrial and motor oils from oil fractions derived from the fuel oil of natural bitumen at the Karasaz-Taspas deposit. Materials and methods: on the study object was fuel oil obtained by atmospheric distillation of natural bitumen. Oil fractions with boiling temperature ranges of 350–400 °C and 400–460 °C were separated using vacuum distillation. Purification was carried out using bleaching clay. The physical and chemical characteristics of the fractions were determined before and after purification according to standard ASTM and GOST methods. Results: The obtained oil fractions are characterized by a high kinematic viscosity, a viscosity index of up to 110.7, and low sulfur content (<0.45 wt.%). Their physical and chemical properties meet the requirements for base oils of groups I and II according to the American Petroleum Institute classification and are comparable to industrial oils of grades I-40A and I-50A. Dewaxing and the addition of additives are necessary to improve low-temperature performance. Conclusion: Natural bitumen from the Karasyaz-Taspas deposit is a promising raw material for producing high-quality base oils. The study confirms the feasibility of comprehensive processing of natural bitumen fuel oil to produce industrial and motor oils, contributing to the replenishment of the raw material base, the sustainable development of the oil industry, and the enhancement of the country’s energy security.
版权所有 © Ayapbergenov Y., Turkpenbayeva B., Akhmetov A., 2025 https://creativecommons.org/licenses/by-nc-nd/4.0
Hydrogen conversion of existing pipelines: integrity solutions
Background: In the global transition to low-carbon energy, hydrogen is becoming an important energy carrier. Adapting existing pipelines for hydrogen transportation can reduce costs and accelerate the development of hydrogen infrastructure. However, the use of pipelines in a hydrogen environment is associated with risks such as hydrogen embrittlement and metal cracking. Kazakhstan still lacks practical experience in the operation of hydrogen pipelines, which makes the task of assessing the technical condition of existing pipelines and their adaptation for operation with hydrogen urgen. Aim: To conduct a comprehensive analysis of the integrity of the pipeline operated in an aggressive hydrogen sulfide environment and to assess the possibility of its repurposing for hydrogen transportation taking into account international standards and methods of strength calculation. Materials and methods: The data of in-line inspection (ILI) including ultrasonic testing of wall thickness were used in the work. API 579 standards were used for defects assessment. Calculations were performed using NIMA software, which allows analyzing data on laminations and cracks in metal. Results: The analysis identified six sections with laminations, of which five were found to be acceptable for service at the current operating pressure of 75 bar. One defect (#6) was classified as unacceptable, requiring either immediate repair or a reduction in operating pressure to 52 bar. Conclusion: The study confirmed that conversion of existing gas pipelines for hydrogen transportation is feasible provided thorough diagnostics and compliance with international standards for strength assessment. Implementation of regular pipeline condition monitoring and development of a phased repair strategy to improve infrastructure reliability in hydrogen environment is recommended.
版权所有 © Akhmetov I., Mirzoev A., 2025 https://creativecommons.org/licenses/by-nc-nd/4.0
Creation of a PVT model for a reservoir under data uncertainty
Background: PVT modeling is a critical step in reserve estimation and reservoir simulation of oil and gas fields. Accurate reproduction of fluid properties under different pressure–temperature conditions increases confidence in calculations and improves production forecasts. The accuracy of a PVT model largely depends on the quality of laboratory fluid data, while inconsistencies or errors in experimental results can reduce the reliability of calculated parameters. Aim: To evaluate the quality and reliability of laboratory data on reservoir fluids from the Cretaceous horizons and to validate consistent PVT regions for model development. Materials and methods: The quality and reliability of laboratory studies were evaluated using PVTsim software and methodological guidelines for validating reservoir fluid properties, where fluid composition and properties were analyzed based on equations of state. Results: Analysis of bottomhole and recombined samples showed clear relationships between reservoir fluid properties. Several PVT regions with distinct characteristics were identified. Comparison of simulation results with laboratory data revealed discrepancies, particularly in the measured density of Albian horizon oil. Reservoir oil parameters were adjusted using the PVT model. Conclusion: This approach removed unreliable laboratory data, provided a more accurate description of reservoir fluid properties, and updated calculation parameters to refine resource estimates.
版权所有 © Dukessova N., Kunzharikova K., Abekesh G., Bektas G., Bissikenova L., Yeltay G., 2025 https://creativecommons.org/licenses/by-nc-nd/4.0
Expanding the horizons of core analysis. Panoramic images of thin rock sections
ABSTRACT Background: Core analysis is a key method for directly evaluating the properties of promising or existing reservoirs. Core data can be used to determine the sedimentological and diagenetic characteristics of rocks, which are critical for assessing their filtration and storage properties. This article presents the findings of a core digitization project, including the application of advanced technologies for analysing high-resolution panoramic images of thin rock sections. Aim: Development and implementation of digital technologies for automated core analysis, including determining porosity and grain size composition from panoramic images of thin rock sections, aim to enhance research accuracy and efficiency over traditional methods, aligning with academic standards. Materials and methods: The study describes methods for automated determination of porosity and grain size distribution, as well as their integration with conventional research techniques. Results: The results demonstrate a significant improvement in analysis accuracy and efficiency compared to manual methods, as supported by statistical data from 147 thin rock sections. Conclusion: The analysis of 147 thin rock sections from eight wells confirmed the effectiveness of digital analysis techniques, which significantly enhanced the accuracy of determining porosity and grain size composition of rocks. The data obtained served as the basis for developing detailed petrophysical models. This is critical for geological and hydrodynamic modelling. Future work includes the further expansion of digital core databases and the implementation of machine learning algorithms to predict reservoir properties.
版权所有 © Doyeva Z., Jarassova T., Saudabayev R., Merbaev R., Pronin N., 2025 https://creativecommons.org/licenses/by-nc-nd/4.0
Remediation technologies for historical oil waste
This paper reviews current technologies for oil waste treatment and the remediation of oil-contaminated sites. Case studies include the cleanup of historically polluted soils at petroleum companies using EGX cavitation soil washing, BioBox bioremediation, conventional bioremediation, and humate-based composite additives with energy-accumulating properties. Results cover oil content in contaminated soils, residual hydrocarbons in remediated soils, and the volumes of restored soils, reclaimed areas, and decommissioned sludge pits.
版权所有 © Idrissova E., Salimgereyev M., Ogay E., Atemova G., 2025 https://creativecommons.org/licenses/by-nc-nd/4.0