Enviar artigo por via de e-mail Influence of Pulsed Beams of Deuterium Ions and Deuterium Plasma on the Aluminum Alloy of Al–Mg–Li System
- Autores: Pimenov V.N.1, Bondarenko G.G.2, Dyomina E.V.1, Maslyaev S.A.1, Gribkov V.A.1, Sasinovskaya I.P.1, Epifanov N.A.1,2, Sirotinkin V.P.1, Sprygin G.S.1, Gaydar A.I.3, Paduch M.4
-
Afiliações:
- Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences
- National Research University High School of Economics
- Scientific Research Institute of Advanced Materials and Technologies
- Institute of Plasma Physics and Laser Microfusion
- Edição: Volume 10, Nº 3 (2019)
- Páginas: 503-511
- Seção: Effects of Energy Fluxes on Materials
- URL: https://bakhtiniada.ru/2075-1133/article/view/207900
- DOI: https://doi.org/10.1134/S207511331903033X
- ID: 207900
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
The damage and structural state of the surface layer of Al–Li–Mg samples composed of Al–5% Mg–2% Li (wt %) under pulsed action of power streams of high-temperature deuterium plasma and high-energy deuterium ions in the Plasma Focus (PF) device have been investigated. The radiation power density was q ~ 106 W/cm2; the pulse duration was 50–100 ns. Pulsed thermal heating and rapid cooling is established to lead to the melting and solidification of a thin surface layer of the alloy for several tens of nanoseconds. At the same time, in the superheated surface layer of the alloy, microcavities of a spherical shape are formed which is associated with intense evaporation of lithium into micropores within the heated layer. Thermal stresses caused by abrupt heating, melting, and cooling of a thin surface layer of metal result in formation of microcracks in the near-surface zone of the samples. The evaporation by the power electron beam of the elements of the anode material of the PF device (copper and tungsten) and their subsequent deposition onto the irradiated surface of the investigated samples in the form of droplets of submicron size are noted. It is shown that the thermal and radiation-stimulated processes generated in the alloy under the action of pulsed energy fluxes in the implemented irradiation regime lead to the redistribution of elements in the surface layer of the aluminum solution, contributing to an increase in magnesium content and the formation of magnesium oxide on the surface.
Sobre autores
V. Pimenov
Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences
Autor responsável pela correspondência
Email: pimval@mail.ru
Rússia, Moscow, 119334
G. Bondarenko
National Research University High School of Economics
Autor responsável pela correspondência
Email: gbondarenko@hse.ru
Rússia, Moscow, 101000
E. Dyomina
Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences
Autor responsável pela correspondência
Email: elenadyom@mail.ru
Rússia, Moscow, 119334
S. Maslyaev
Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences
Autor responsável pela correspondência
Email: maslyaev@mail.ru
Rússia, Moscow, 119334
V. Gribkov
Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences
Autor responsável pela correspondência
Email: gribkovv@rambler.ru
Rússia, Moscow, 119334
I. Sasinovskaya
Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences
Autor responsável pela correspondência
Email: porfirievna@mail.ru
Rússia, Moscow, 119334
N. Epifanov
Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences; National Research University High School of Economics
Autor responsável pela correspondência
Email: mophix94@gmail.com
Rússia, Moscow, 119334; Moscow, 101000
V. Sirotinkin
Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences
Autor responsável pela correspondência
Email: sir@imet.ac.ru
Rússia, Moscow, 119334
G. Sprygin
Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences
Autor responsável pela correspondência
Email: engaer@rambler.ru
Rússia, Moscow, 119334
A. Gaydar
Scientific Research Institute of Advanced Materials and Technologies
Autor responsável pela correspondência
Email: niipmt@mail.ru
Rússia, Moscow, 115054
M. Paduch
Institute of Plasma Physics and Laser Microfusion
Autor responsável pela correspondência
Email: marian.paduch@ifpilm.pl
Polônia, Warsaw, 01-497
Arquivos suplementares
