Enviar artigo por via de e-mail Effect of welding thermal cycle on structural and phase weld metal transformations for heat-resistant Cr–Mo–V steels
- Autores: Timofeev M.N.1, Karzov G.P.1, Galyatkin S.N.1, Mikhaleva E.I.1
-
Afiliações:
- National Research Center Kurchatov Institute—Central Research Institute of Structural Materials Prometey
- Edição: Volume 8, Nº 6 (2017)
- Páginas: 886-891
- Seção: Welding and Related Processes. Welding Materials and Technologies
- URL: https://bakhtiniada.ru/2075-1133/article/view/206992
- DOI: https://doi.org/10.1134/S2075113317060156
- ID: 206992
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
Results are presented for dilatometric and metallographic investigations and determination of microhardness for weld metal made of the materials for the automatic welding of VVER reactor vessels and oil hydrocracking reactor vessels. It is found that small differences in the content of alloying elements, such as nickel, chromium, molybdenum, and vanadium, cause differences in the structure of the weld metal before heat treatment.
Sobre autores
M. Timofeev
National Research Center Kurchatov Institute—Central Research Institute of Structural Materials Prometey
Autor responsável pela correspondência
Email: mail@crism.ru
Rússia, St. Petersburg, 191015
G. Karzov
National Research Center Kurchatov Institute—Central Research Institute of Structural Materials Prometey
Email: mail@crism.ru
Rússia, St. Petersburg, 191015
S. Galyatkin
National Research Center Kurchatov Institute—Central Research Institute of Structural Materials Prometey
Email: mail@crism.ru
Rússia, St. Petersburg, 191015
E. Mikhaleva
National Research Center Kurchatov Institute—Central Research Institute of Structural Materials Prometey
Email: mail@crism.ru
Rússia, St. Petersburg, 191015
Arquivos suplementares
