Enviar artigo por via de e-mail Synthesis and Properties of Mullite–Sialon–ZrB2Materials Produced Using a Spark-Plasma Technique
- Autores: Hmelov A.V.1
-
Afiliações:
- Institute of Silicate Materials, Riga Technical University
- Edição: Volume 59, Nº 6 (2019)
- Páginas: 633-641
- Seção: Article
- URL: https://bakhtiniada.ru/1083-4877/article/view/249185
- DOI: https://doi.org/10.1007/s11148-019-00287-0
- ID: 249185
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
The sialon-to-ZrB2 ratio during spark-plasma sintering at pressing load 75 MPa and 1200 – 1600°C influenced the phase composition, Si3N4 and Al2O3 contents in sialon, microstructure and grain size of crystalline phases, relative density, open porosity, linear shrinkage, physicomechanical properties, and the linear correlation between the elasticity modulus and compressive strength of mullite–sialon–ZrB2 samples.
Palavras-chave
Sobre autores
A. Hmelov
Institute of Silicate Materials, Riga Technical University
Autor responsável pela correspondência
Email: aleksejs.hmelov44@gmail.com
Letônia, Riga
Arquivos suplementares
