Development of a machine for tillage and sowing of grain crops

BACKGROUND: When designing sowing machines, requirements are imposed to ensure soil preparation and sowing of grain crops as part of the implementation of energy-saving technology, since their productivity largely depends on these types of work. Thus, increasing the efficiency of sowing machines is an urgent task.

AIM: The development of a seeder design that allows, with maximum simplification of the design compared with analogues, reducing metal consumption and increasing the manufacturability of the product, both in production and in operation, to ensure the best conditions for the growth of crops and a significant increase in yield. In one pass, the seeder sows the main crop, small-seeded crop (binary component) and introduces mineral fertilizers, and can also be used when putting waste and fallow lands into circulation.

METHODS: Methods of system analysis, mathematical modeling, and experiment planning were used in the development of the drill design. Experimental studies were conducted in the field and laboratory conditions in accordance with existing methods, using modern electronic and mechanical devices. Experimental data processing was carried out in the environment of the MathCAD system, Microsoft Office Excel.

RESULTS: In contrast to known analogues, the proposed technical solution of the seeder simplifies the design, reduces the weight and improves the manufacturability of the product — on a simple frame welded in one plane from pipes, but free enough for the passage of crop residues and soil particles, on one side are installed stands with tines for mounting discs, and on the other - for mounting the hopper. The plane of attachment of tines for disc mounting is as close as possible to the soil surface, which reduced the load on the frame and reduced its material intensity. The seed drill-cultivator developed by the authors allows to realise all operations related to soil cultivation and sowing of grain crops

CONCLUSION: The design solutions for the cultivator planter obtained by the authors simplified the design of the planter compared to its analogues, reduced its metal consumption, and therefore its weight, which makes it possible to use tractors of a smaller class with lower fuel consumption. The adjustment of the angle of attack of the discs has also been simplified, and the additional installation of baking powder has reduced the clogging of the seeder with crop residues and soil lumps.