Testing the Filtering Process for Spent Zinc Melt After Removal of Fuel Cladding with the BOR-60 Reactor SNF Nitride


Цитировать

Полный текст

Открытый доступ Открытый доступ
Доступ закрыт Доступ предоставлен
Доступ закрыт Только для подписчиков

Аннотация

The results of testing the efficiency of the process of filtering zinc melt obtained after dissolving the fuel rod cladding from the BOR-60 reactor with SNF nitride in a laboratory installation for zinc melt purification from suspended fission products, intermetallic compounds, and fuel particles in the conditions of the protective chamber are presented. The feasibility of filtering for zinc recovery after dissolution of the fuel rod cladding is demonstrated, while considering the ratio of structural materials and zinc corresponding to the tests performed.

Ключевые слова

Об авторах

M. Kuzin

SSC Research Institute of Atomic Reactors

Автор, ответственный за переписку.
Email: distutfuzzy@yandex.ru
Россия, Ulyanovsk oblast, Dimitrovgrad, 433510

A. Makarov

SSC Research Institute of Atomic Reactors; Dimitrovgrad Engineering and Technological Institute of the National Research Nuclear University MEPhI

Email: distutfuzzy@yandex.ru
Россия, Ulyanovsk oblast, Dimitrovgrad, 433510; Ulyanovsk oblast, Dimitrovgrad, 433511

P. Lakeev

SSC Research Institute of Atomic Reactors

Email: distutfuzzy@yandex.ru
Россия, Ulyanovsk oblast, Dimitrovgrad, 433510

Дополнительные файлы

Доп. файлы
Действие
1. JATS XML

© Pleiades Publishing, Ltd., 2018

Согласие на обработку персональных данных

 

Используя сайт https://journals.rcsi.science, я (далее – «Пользователь» или «Субъект персональных данных») даю согласие на обработку персональных данных на этом сайте (текст Согласия) и на обработку персональных данных с помощью сервиса «Яндекс.Метрика» (текст Согласия).