Enviar artigo por via de e-mail The Phase Formation and Microstructure of Composites Based on 3Ti–Al with Addition of В4С Obtained by the Powder Metallurgy Method
- Autores: Ershova T.B.1, Vlasova N.M.1, Teslina M.A.1, Astapov I.A.1
-
Afiliações:
- Institute of Materials Science, Khabarovsk Scientific Center, Far Eastern Branch
- Edição: Volume 52, Nº 5 (2018)
- Páginas: 868-872
- Seção: Technology of Inorganic Substances and Materials
- URL: https://bakhtiniada.ru/0040-5795/article/view/172663
- DOI: https://doi.org/10.1134/S0040579518050093
- ID: 172663
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
Intermetallic alloys based on Ti3Al with strengthening additives of refractory compounds and MAX phases of various compositions have been obtained by the powder metallurgy method. Their structure and microhardness were studied. Optimum conditions were determined (sintering temperature was 1400°C, sintering time was 1 h, B4C additive was 15 wt %), which made it possible to obtain a composite material with the best mechanical properties.
Palavras-chave
Sobre autores
T. Ershova
Institute of Materials Science, Khabarovsk Scientific Center, Far Eastern Branch
Email: vlasova64@yandex.ru
Rússia, Khabarovsk, 680042
N. Vlasova
Institute of Materials Science, Khabarovsk Scientific Center, Far Eastern Branch
Autor responsável pela correspondência
Email: vlasova64@yandex.ru
Rússia, Khabarovsk, 680042
M. Teslina
Institute of Materials Science, Khabarovsk Scientific Center, Far Eastern Branch
Email: vlasova64@yandex.ru
Rússia, Khabarovsk, 680042
I. Astapov
Institute of Materials Science, Khabarovsk Scientific Center, Far Eastern Branch
Email: vlasova64@yandex.ru
Rússia, Khabarovsk, 680042
Arquivos suplementares
