Отправить статью по E-mail Impact of a Supersonic Dissociated Air Flow on the Surface of HfB2–30 vol % SiC UHTC Produced by the Sol–Gel Method
- Авторы: Simonenko E.P.1, Simonenko N.P.1, Gordeev A.N.2, Kolesnikov A.F.2, Papynov E.K.3,4, Shichalin O.O.3,4, Tal’skikh K.Y.3,4, Gridasova E.A.3,4, Avramenko V.A.3,4, Sevastyanov V.G.1, Kuznetsov N.T.1
-
Учреждения:
- Kurnakov Institute of General and Inorganic Chemistry
- Ishlinskii Institute of Problems of Mechanics
- Institute of Chemistry, Far-Eastern Branch
- Far-Eastern Federal University
- Выпуск: Том 63, № 11 (2018)
- Страницы: 1484-1493
- Раздел: Physical Methods of Investigation
- URL: https://bakhtiniada.ru/0036-0236/article/view/169109
- DOI: https://doi.org/10.1134/S0036023618110177
- ID: 169109
Цитировать
Открытый доступ
Доступ предоставлен
Только для подписчиков
Аннотация
A new method to produce ultra-high-temperature ceramic composites under rather mild conditions (1700°C, 30 MPa, treatment time 15 min) was applied to synthesize a relatively dense (ρrel = 84.5%) HfB2–30 vol % SiC material containing nanocrystalline silicon carbide (average crystallite size ∼37 nm). The elemental and phase compositions, microstructure, and some mechanical properties of this material and also its thermal behavior in an air flow within the temperature range 20–1400°C were investigated. Using a high-frequency induction plasmatron, a study was made of the effect of a supersonic dissociated air flow on the surface of the produced ultra-high-temperature ceramic composite shaped as a flat-end cylindrical sample installed into a copper water-cooled holder. On 40-min exposure of the sample to the supersonic dissociated air flow, the sample did not fail, and the weight loss was 0.04%. Although the heat flux was high, the temperature on the surface did not exceed 1400–1590°C, which could be due to the heat transfer from the sample to the water-cooled model. The thickness of the oxidized layer under these conditions was 10–20 μm; no SiC-depleted region formed. Specific features of the microstructure of the oxidized surface layer of the sample were noted.
Ключевые слова
Об авторах
E. Simonenko
Kurnakov Institute of General and Inorganic Chemistry
Автор, ответственный за переписку.
Email: ep_simonenko@mail.ru
Россия, Moscow, 119991
N. Simonenko
Kurnakov Institute of General and Inorganic Chemistry
Email: ep_simonenko@mail.ru
Россия, Moscow, 119991
A. Gordeev
Ishlinskii Institute of Problems of Mechanics
Email: ep_simonenko@mail.ru
Россия, Moscow, 119526
A. Kolesnikov
Ishlinskii Institute of Problems of Mechanics
Email: ep_simonenko@mail.ru
Россия, Moscow, 119526
E. Papynov
Institute of Chemistry, Far-Eastern Branch; Far-Eastern Federal University
Email: ep_simonenko@mail.ru
Россия, Vladivostok, 690022; Vladivostok, 690091
O. Shichalin
Institute of Chemistry, Far-Eastern Branch; Far-Eastern Federal University
Email: ep_simonenko@mail.ru
Россия, Vladivostok, 690022; Vladivostok, 690091
K. Tal’skikh
Institute of Chemistry, Far-Eastern Branch; Far-Eastern Federal University
Email: ep_simonenko@mail.ru
Россия, Vladivostok, 690022; Vladivostok, 690091
E. Gridasova
Institute of Chemistry, Far-Eastern Branch; Far-Eastern Federal University
Email: ep_simonenko@mail.ru
Россия, Vladivostok, 690022; Vladivostok, 690091
V. Avramenko
Institute of Chemistry, Far-Eastern Branch; Far-Eastern Federal University
Email: ep_simonenko@mail.ru
Россия, Vladivostok, 690022; Vladivostok, 690091
V. Sevastyanov
Kurnakov Institute of General and Inorganic Chemistry
Email: ep_simonenko@mail.ru
Россия, Moscow, 119991
N. Kuznetsov
Kurnakov Institute of General and Inorganic Chemistry
Email: ep_simonenko@mail.ru
Россия, Moscow, 119991
Дополнительные файлы
